Elo TouchSystems Webcam Quick Install Manual

Caution:
The touch computer must be unplugged before any
installation occurs.

Quick Install Guide

www.elotouch.com

North America

Elo Touchsystems
301 Constitution Drive
Menlo Park, CA 94025
www.elotouch.com

Europe

Tel [phone]
Fax [phone]
[e-mail]

Asia-Pacic

Tel [phone]
Fax [phone]
www.tps.co.jp

Latin America

Tel [phone]
Fax [phone]
www.elotouch.com.ar

Elo Technical Support

Online self-help:

www.elotouch.com/go/websupport

Technical Support contacts in your region:

www.elotouch.com/go/contactsupport

Elo (logo), Elo TouchSystems, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks of the TE Connectivity Ltd. family of
companies.

DISCLAIMER:
Tyco Electronics Corporation and its Affiliates in the TE Touch Solutions business unit of the TE Connectivity Ltd. family of companies
(collectively “TE”) reserves the right to change or update, without notice, any information contained herein; to change, without notice, the
design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution of any
products.

Copyright 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All rights reserved. [03/11/2011].

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise
without prior written permission of Tyco Electronics Corporation.

Installing the Webcam for the
B-Series / C-Series Touchcomputers

Revision A
P/N E015741

Item 1: One Elo Webcam
Item 2: Two mounting screws
Item 3: Two screw covers

Included Items

Insert the hooks on the device
into the corresponding slots on
the touch computer.

Secure the device to the
touchcomputer using the
included screws. Cover the two
screws with the circular covers
included in the kit.

Turn off the touchcomputer.

To remove each cover, locate
the two small notches on the
cover.

Attach the webcam and power
on the touchcomputer. Install
the drivers for the webcam.

Press a small screwdriver into the
cover between the two notches.
As the cover bends up, grasp the
end and peel it away.

Remove the two accessory
covers on the top of the monitor.

Plug the cable into
the connector on the
touchcomputer.

Installing the Webcam

Please go to www.elotouch.com/support
to verify you have the latest drivers before installing this device.

2

5

1

4

3

6

7

8