Elo TouchSystems ETXX87C-4SWA-1 Series User Manual

Elo Entuitive Touchmonitor
User Guide
For 15", 17" and 19" CRT Open Frame Series
Touchmonitors
ETXX8 7C -4SWA-1 Series M o d els
Revision B
P/N 008551
1-800-ELOTOUCH
www.elotouch.com
www.elogaming.com
Copyright © 2002 Elo TouchSystem s Inc. All Rights Reserved.
No part of this p ubl icatio n may be reprod uced, tra nsmi tted, tra nscri bed, sto red in a retrieval syst em, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permi s s ion of Elo T ouchSystems.
Disclaimer
The information in this document is subject to change without notice. Elo TouchSystems makes no representations or warranties with respect to the contents hereof, and specifically disclaims any implied warr anties o f merchan tabilit y or fitnes s for a parti cular pu rpose. El o TouchSystems re serves the right to revise this publication and to make changes from time to time in the content hereof with ou t ob ligation of El o TouchSystem s t o no tify any pe r s o n of such revi s io ns or ch an g es .
Trademark Acknowledgments
IntelliTouch, SecureTouch, iTouch, Entuitive, and MonitorMouse are trademarks of Elo TouchSystems, Inc.
Other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Elo TouchSystems claims no interest in trademarks other than its own.
iii
iv
Table of Contents
Chapter 1
Introduction 1
Precautions . . . . . . . . . . . . . . . . . . . . 1
About the Product . . . . . . . . . . . . . . . . . 1
Chapter 2
Installation and Setup 3
Unpacking Your Touchmonitor. . . . . . . . . . . 3
Connecti ng Your Touchmonitor . . . . . . . . . . 4
Connect the Video Cable. . . . . . . . . . . . 4
Connect the Serial Touchscreen Cable . . . . 5
Connect the Power Cable . . . . . . . . . . . 6
Installing the Driver Software . . . . . . . . . . . 7
Install ing the Touch Driver for Windows XP,
Windows 2000, Me, 95/98 and NT 4.0 . . . . 8
Install ing the Touch Driver f or MS-DOS and
Windows 3.1 . . . . . . . . . . . . . . . . 9
Chapter 3
Operation 11
About Touchmonitor Adjustments . . . . . . . . 11
Touchmonitor Controls . . . . . . . . . . . . . 12
Using the On Screen Display (OSD). . . . . 12
OSD Adjustments . . . . . . . . . . . . . . 13
Warranty 31 Index 33
Chapter 4
Troubleshooting 17
Appendix A
Touch Te chnology 19
Touchscreens: An Overview. . . . . . . . . . . 19
iTouch Touchscreens . . . . . . . . . . . . . . 20
Appendix B
Touchmonitor Safety 21
Appendix C
Technic al Spec ifi cati ons 23
Touchmonitor Specifications . . . . . . . . . . 23
Signal PINO UT for 15",17" and 19" Monitors 26
Power Consumption . . . . . . . . . . . . . . . 27
Preset Timing Table . . . . . . . . . . . . . . . 28
Regulatory Information 29
v
vi
C HAPTER
1
C
HAPTER
1
I
NTRODUCTION
Congratulations on your purchase of an Elo TouchSyst ems Entuitive touchmonitor. Your new high-resolution touchmonitor com bines the reliable performance of Elo’s touch technol ogy with the latest advances in CRT display design. This combination of features creates a natural flow of information between a user and the touchmonitor.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximi ze the life of your unit. See Appendix B for more information on touc hmonitor safety.
Abou t the Pr od uct
Your CRT touchmonitor is a color display with the following features:
• 13.8-inch viewable image 0.28mm dot pitc h CDT for 15".
• 15.7-inch viewable image 0.27mm dot pitch CDT for 17".
• 18-inch vie wable image 0.2 5mm dot pitch CDT for 19".
• Supports a wide range of screen refr esh rates with flicker-free picture quality.
• Plug and P lay functionality automatically a djusts the monitor to its optimum performance.
• VESA DPMS (Display Power Management Signaling).
• VESA DDC1/2B compatibility.
• Patented iTouch technology from Elo TouchSystems.
1-1
• RS-232 touch interface.
1-2 Elo Entuitive Touchmonitor User Guide
C
HAPTER
2
I
NSTALLATION AND
This chapter discu sses how to install your CRT touchmonito r and how to install Elo TouchSyste ms driver software.
Unpac king Your Touc hmon itor
C HAPTER
2
S
ETUP
N
OTE
Check that the following 5 items are present and in good condition:
:
Power cord is not included.
CD
Software
CD Software
CRT Touchmonitor
Quick Installation
Seri al cable
VGA cable
Guide
Quick Installation Guide
2-3
Conn ecting Your Touchmon itor
I
MPORTANT
:
Before connecting t he cables to your touch monitor an d PC, be sure that the com pu ter and touchmoni tor are turned off.
Power
Connect the Video Cable
Female 9-pin serial touchscreen connector
Female 15-pin video connector
Video cable
Serial touchscreen cable
Connections on underside
Female 15-pin video connector
• Connect one end of the video cable to the video connector on your PC and the other end of the cable to the video connector on your monitor. Secure the cable by turning the thumbscrews on each connector.
2-4 Elo Entuitive Touchmonitor User Guide
Video port
Video cable
Connect the Serial Touchscreen Cable
Connections on underside
Female 9-pin cable connector
Video port
Ferrite bead
Serial cable
Video cable
• Connect the touchs creen cable. Connect one end to the appropriate port on the back of your computer. Connect the other end of the cable to the touchscreen connector on your touchmonitor. The touchscreen cable connectors should fit snugly into the connec tors on your touchmonitor and computer. Secure the cable by turning the thumbscrews on each connector.
2-5
Connect the P ower Cable
Connections on underside
Power cable
Power cable
• Your monitor does not incl ude a power cable. You may either purchase a country specific power cable from Elo (www.elogaming.com), or construct your own custom power cable (see Appendix B for details). C onnect the power cable to the AC connector on your touchmonitor. To protect your equipment again st risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a switched su rge protector, and th en connect the surge pr otector to a grounded (three-pr onge d) AC electrical outlet.
• Your touchmonitor has no power switch. Power on your monitor using the power swit ch of th e surge p ro tect o r, and check tha t th e power LED is on. If not, ref er to Chapter 4, Troubleshooting.
• After a brief pause the picture should appear. If necessary, adjust the front panel controls a ccording to your personal preference (see Chapter 3).
• Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to install the appropriate touchscreen dr iver software. Follow the directions starting on the next page to install the driver software .
N
OTE
:
If this monitor is intended to be used in an existing system, the driver software may already be installed by the system manufacturer. Skip to Chapter 3.
2-6 Elo Entuitive Touchmonitor User Guide
Loading...
+ 29 hidden pages