Elo TouchSystems Entuitive ET1566L-7SWC-1 User Manual
(OR(QWXLWLYH7RXFKPRQLWRU
8VHU*XLGH
/&'3DQHO0RXQW7RXFKPRQLWRU
(7/6:&
5HYLVLRQ&
31
(OR7RXFK6\VWHPV,QF
(/2728&+
ZZZHORWRXFKFRP
1
Chapter 1
Introduction 1
Precautions . . . . . . . . . . . . . . . . . . . . 1
About the Product . . . . . . . . . . . . . . . . . 1
Chapter 2
Installation and Setup 3
Unpacking Your Panel Mount
Touchmonitor . . . . . . . . . . . . . . . . . . 4
Product Overview . . . . . . . . . . . . . . . . . 5
Main Unit . . . . . . . . . . . . . . . . . . . . 5
Rear View . . . . . . . . . . . . . . . . . . . 5
Bottom View . . . . . . . . . . . . . . . . . . 6
Remote OSD with Cable Attachment . . . . . 6
Mounting Your Touchmonitor . . . . . . . . . . . 7
Connecting Your Touchmonitor . . . . . . . . . . 8
Optimizing the LCD Display . . . . . . . . . . . 11
Installing the Driver Software . . . . . . . . . . 12
Installing the Serial Touch Driver for Windows
XP, Windows 2000, Me, 95/98 and NT 4.0 . 13
Installing the Serial Touch Driver for MS-DOS
and
Windows 3.1 . . . . . . . . . . . . . . . 14
Chapter 3
Operation 15
About Touchmonitor Adjustments . . . . . . . . 15
Connecting the OSD Module . . . . . . . . . . 16
OSD Module Controls . . . . . . . . . . . . . . 17
OSD Menu Function. . . . . . . . . . . . . . . 18
Chapter 4
Troubleshooting 19
Solutions to Common Problems. . . . . . . . . 19
Appendix A
Native Resolution 21
Appendix B
Touchmonitor Safety 23
Care and Handling of Your Touchmonitor . . . . 24
Appendix C
Technical Specifications 25
Compatibility Modes . . . . . . . . . . . . . . 25
Touchmonitor Specifications . . . . . . . . . . 26
15" LCD Touchmonitor (ET1566L) Specifications
26
AccuTouch Touchscreen Specifications . . . 27
15" LCD Panel Mount Touchmonitor (ET1566L-
7SWC-1) Dimensions . . . . . . . . . . . 28
Panel Cutout . . . . . . . . . . . . . . . . . 30
Regulatory Information 31
Warranty 35
Index 37
Table of Contents
2
3
Copyright © 2003 Elo TouchSystems Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written
permission of Elo TouchSystems.
Disclaimer
The information in this document is subject to change without notice. Elo TouchSystems makes no
representations or warranties with respect to the contents hereof, and specifically disclaims any
implied warranties of merchantability or fitness for a particular purpose. Elo TouchSystems reserves
the right to revise this publication and to make changes from time to time in the content hereof
without obligation of Elo TouchSystems to notify any person of such revisions or changes.
Trademark Acknowledgments
IntelliTouch, SecureTouch, AccuTouch, Entuitive, and MonitorMouse are trademarks of Elo
TouchSystems, Inc.
Other product names mentioned herein may be trademarks or registered trademarks of their
respective companies. Elo TouchSystems claims no interest in trademarks other than its own.
1-1
C HAPTER
C
HAPTER
1
I
NTRODUCTION
Congratulations on your purchase of an Elo TouchSystems Entuitive LCD panel
mount touchmonitor. Your new high-resolution industrial touchmonitor
combines the reliable performance of Elo’s touch technology with the latest
advances in LCD display design. This combination of features creates a natural
flow of information between you and your touchmonitor.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit. See Appendix B for more
information on touchmonitor safety.
About the Product
Your LCD panel mount Touchmonitor is a 15" XGA TFT color display with the
following features:
• Direct analog RGB input
• 15.0” diagonal screen size
• 16.7 million displayable colors (262,144-1549L)
• 1024 x 768 resolution
• XGA/ SVGA/ VGA/ VESA/ Mac/ NEC PC-98 compatible
• 24~60kHz horizontal scan
• 56~75Hz refresh rate
1-2 Elo Entuitive Touchmonitor User Guide
• Auto adjustment capability
• High quality full screen re-scaling
• Multilingual OSD menus in four languages: English, French, Italian,
Spanish, and Japanese
• VESA flat panel monitor physical mounting interface (75mm)
• Worldwide agency approvals that include UL*, CUL*, TÜV- Bauart, FCC,
CE, C-Tick, VCCI
• Certified by UL to NEMA 4, 4x and 12: ET1566L-7SWC-1*
• Designed to meet NEMA 4, 4x & 12: ET1566L-9SWC-1/5*
*ITE recognized component
For full Product Specifications refer to Appendix C.
2-3
C HAPTER
C
HAPTER
2
I
NSTALLATION AND
S
ETUP
This chapter discusses how to install your LCD panel mount touchmonitor and
how to install Elo TouchSystems driver software.
2-4 Elo Entuitive Touchmonitor User Guide
Unpacking Your Panel Mount
Touchmonitor
Check that the following 7 items are present and in good condition:
/&''LVSOD\
0RQLWRUSRZHUFDEOH86&DQDGD
(XURSHDQPRQLWRUSRZHUFDEOH
9LGHRFDEOH
6HULDOWRXFKVFUHHQ
FDEOH
4XLFN,QVWDOODWLRQ*XLGHDQG
26'PRGXOH
AUTO/SEL DOWN UP MENU
1RWHVKLSPHQWVWRWKH8.ZLOO
FRQWDLQD8.SRZHUFRUGDOVR
Quick
Installation
Guide
CD
Software
VRIWZDUH&'
2-5
Product Overview
Main Unit
Rear View
LCD Display
2-6 Elo Entuitive Touchmonitor User Guide
Bottom View
Remote OSD with Cable Attachment
Customer Panel
AUTO/SEL DOWN UP MENU
2-7
Mounting Your Touchmonitor
N
OTE
:
You will need a 6mm allen socket and torque wrench (Hex) to attach the mounting
brackets.
Your panel mount touchmonitor comes with 6 mounting brackets (and 6
screws). You will need 6 brackets to mount your touchmonitor. Two brackets
attach to the top and bottom and one on each side.
To mount your touchmonitor to a panel, follow the steps below:
1 Prepare the opening in the panel (307mm x 398.2mm/12.08" x 15.68"). See
page C-36. Mounting panel thickness must not exceed 13mm.
2 Disassemble the 6 brackets and NEMA frame.
3 Verify that your touchmonitor will clear the opening as you attempt to front
mount it. The opening will be covered by the bezel flanges.
4 Mount the touchmonitor from the front side of the opening in the supporting
panel and temporarily secure it.
5 From the back of the panel opening, slip the NEMA frame over the rear
cover. Attach the 6 brackets into the slots. Use 2 brackets on top and bottom
and 1 on each side.
6 To secure the touchmonitor, turn the screws clockwise until a firm
contact is made with the NEMA frame. To assure a “flat” mount, screws
should be tightened “cris-cross” and not sequentially, i.e. tighten the
upper left corner screw first then the lower right screw. Torque screws
to 35 in lbs. (4 Nm).
2-8 Elo Entuitive Touchmonitor User Guide
Connecting Your Touchmonitor
The following illustrations guide you step by step in connecting your
touchmonitor.
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and the touchmonitor are turned off.
Serial
touchscreen
connector
Female 15-pin
video
connector
Video cable
Connections on underside
US
power cable
European
power cable
Powe r
OSD module
Power switch
Serial cable
AUTO/SEL DOWN UP MENU
OSD module
connector
2-9
STEP 1-Connecting the Video Cable
• Connect the 15-pin video cable (the ferrite bead end) to the video port on
your PC.
• Connect the other end of the video cable to the video connector on your
touchmonitor.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector clockwise.
Video
cable
Video
port
Connections on underside
Ferrite bead
Female 15-pin
video
connector
Loading...