Elo TouchSystems EMV Cradle for Ingenico RP457c Quick Installation Manual

Revision A

P/N E748012

www.elotouch.com

© 2018 Elo Touch Solutions, Inc. All rights reserved.

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness
for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without
obligation of Elo to notify any person of such revisions or changes.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise
without prior written permission of Elo Touch Solutions, Inc.

Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.

North America

800-ELO-TOUCH
Tel [phone]
Fax [phone]
[e-mail]

Europe

Tel [phone]
Fax [phone]
[e-mail]

Asia-Pacific

Tel [phone]
Fax [phone]
[e-mail]

Latin America

Tel [phone]
[e-mail]

Elo Touch Solutions Technical Support

Online self-help:
www.elotouch.com/support

Quick Installation Guide

EMV Cradle for

Ingenico RP457c

Revision A

P/N E748012

1x

1x USB cable

1x

4x

Please go to www.elotouch.com/support to verify you have the latest drivers before installing this device.

Installation

Slide cover bracket over RP457c and ensure mounting holes line up

Connect USB cable to RP457c

Secure cover to bracket using two screws.

1

2

3

4

5

6

Remove the peripheral cover from the touch display and secure bracket with two screws

Connect USB cable touch display

Slide RP457c into bracket and verify each edge engages with bracket