Elo TouchSystems E309480, E331130, E355477 User Manual

Included Items:

E309480 includes one 1GB DDR2 Memory DIMM, 800MHz
E355477 includes one 2GB DDR2 Memory DIMM, 800MHz
E331130 includes one 4GB DDR2 Memory DIMM, 800MHz

Installing the memory module for B/C Series
Touchcomputers and IDS Computer Module

Caution:

Caution:
The touch computer must be unplugged before any installation occurs.

The touch computer must be unplugged before any installation occurs.

North America

Elo Touchsystems
301 Constitution Drive
Menlo Park, CA 94025
www.elotouch.com

Elo (logo), Elo TouchSystems, TE (logo) and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors.

Elo Technical Support

Online self-help:

www.elotouch.com/go/websupport

Technical Support contacts in your region:

www.elotouch.com/go/contactsupport

Europe

Tel [phone]
Fax [phone]
[e-mail]

Asia-Pacic

Tel [phone]
Fax [phone]
www.tps.co.jp

Revision B
P/N E919251

Latin America

Tel [phone]
Fax [phone]
www.elotouch.com.ar

For B/C Series Touchcomputers

For IDS Computer Modules

1

2

3

Remove the cable cover.

Remove the rear cover by
unscrewing the two thumb
screws and sliding the cover
upward.

Insert memory module into an
available socket, or replace an
existing module.

Note: Model B1, B3, C1, C3
touchcomputers have only one
memory socket.

1

2

2

3

3

Remove the two retaining
screws from the cover plate of
the computer module.

Insert memory module into an
available socket, or replace an
existing module.

Note: Model ECM1 has only
one
memory socket.

Reinstall the retaining screws on
the cover plate of the computer
module.

4

Re-install the rear cover, tighten
the thumb screws, and reinstall
the cable cover.