Elo TouchSystems 3243L, 3209L User Manual

USER MANUAL
Elo Touch Solutions
3243L/3209L Touchmonitors
SW200146 Rev A
SW200146 Rev A, Page 2 of 28
Copyright © 2012 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Afffiliates (collectively "Elo") makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments
AccuTouch, CarrollTouch, Elo (logo), Elo Touch Solutions, Elo TouchSystems, IntelliTouch, iTouch, are trademarks of Elo and its Affiliates. Windows is a trademark of Microsoft Corporation.
SW200146 Rev A, Page 3 of 28
Table of Contents
Chapter 1: Introduction ...........................................................................................4
Chapter 2: Installation .............................................................................................5
Chapter 3: Mounting .............................................................................................. 10
Chapter 4: Operation ............................................................................................. 12
Chapter 5: Technical Support ............................................................................. 19
Chapter 6: Safety & Maintenance ...................................................................... 21
Chapter 7: Regulatory Information ................................................................... 23
Chapter 8: Warranty Information ....................................................................... 27
SW200146 Rev A, Page 4 of 28
Chapter 1: Introduction
Product Description
Your new touchmonitor combines the reliable performance of Elo Touch Solutions touch products with the latest developments in touch technology and display design. This combination of features creates a natural flow of information between a user and the touchmonitor.
This widescreen touchmonitor incorporates a 24-bit color, active matrix thin-film-transistor LCD panel to provide high quality display performance. Its Full HD resolution of 1920x1080 is suitable for displaying graphics and images. Its LED backlight significantly reduces power consumption and eliminates mercury (compared to CCFL-backlit panels). Other features that enhance this LCD monitor’s performance are Plug & Play compatibility and on-screen display (OSD) controls.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your unit and prevent risks to user safety. See the Safety & Maintenance chapter for more information.
This manual contains information that is important for the proper setup and maintenance of the unit. Before setting up and powering on your new touchmonitor, read through this manual, especially the Installation, Mounting, and Operation chapters.
SW200146 Rev A, Page 5 of 28
Chapter 2: Installation
Unpacking the Touchmonitor
Open the carton and verify that the following items are present:
Touchmonitor with protective sheet for its face Elo TouchTools CD & User Manuals CD Japanese language regulatory information pamphlet Quick Install Guide VGA cable HDMI cable (ET3243L-XXWA models only) DVI cable (ET3243L-XXAA models only) USB cable (not available for ET3243L-0NXX models) International power cables Mounting brackets
SW200146 Rev A, Page 6 of 28
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the HDMI, DVI, or VGA video cables between the monitor’s HDMI/DVI/VGA input connectors and your HDMI/DVI/VGA video source. Tighten the video cable’s screws for best performance.
2. Connect the USB touch cable between the monitor’s USB connector and your PC’s USB
port. (Not applicable for ET3243L-0NXX models)
3. Connect the power cable to the monitor’s input power jack and the AC power outlet.
4. The touchmonitor ships in an ON state, video should be displayed on your monitor already.
SW200146 Rev A, Page 7 of 28
Installing the Touch Technology Software Drivers
Some software installation is required for your touchmonitor to work with your computer. The drivers for the Windows 7, XP, Vista, WePOS, and 32-bit Server 2003 and 2008 operating
systems are provided with your touchmonitor on a CD. Visit www.elotouch.com for: The most up-to-date touch driver versions
Additional touch driver information Detailed touch driver installation guides Touch drivers for other operating systems
Insert the Elo TouchTools CD into your computer’s CD-ROM drive. The CD should automatically run the Elo TouchTools application. Select “Install Driver for This computer”:
SW200146 Rev A, Page 8 of 28
For Windows XP, Vista, Server 2003, Server 2008, and WEPOS installations, install the “USB Touchscreen Drivers” when prompted:
SW200146 Rev A, Page 9 of 28
For Windows 7 installations, check the “Install driver” box under “Elo USB Interfaces – Other Touchscreens”
After accepting the end-user license agreement, the drivers will finish installing. Reboot your computer after the install is complete.
Loading...
+ 19 hidden pages