Elo TouchSystems 2740L User Manual
Elo Touch Solutions
2740L Touchmonitors
USER MANUAL
SW602096 Rev A
Copyright © 2013 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, including, but not limited to, electronic,
magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Afffiliates
(collectively "Elo") makes no representations or warranties with respect to the contents herein, and specifically
disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of Elo to
notify any person of such revisions or changes.
Trademark Ackno wledgments
AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems, IntelliTouch, iTouch,
SecureTouch, TouchTools and V uPoint are trademarks of Elo and it s Af filiates. Windows i s a trademark of Microsoft
Corporation.
User Manual: 2740L
SW602096 Rev A, Page 2 of 27
Table of Contents
Chapter 1: Introduction ........................................................................................... 4
Chapter 2: Installation
Chapter 3: Mounting
Chapter 4: Operation
Chapter 5: Technical Support
Chapter 6: Safety & Maintenance
............................................................................................. 5
.............................................................................................. 10
............................................................................................. 12
............................................................................. 17
...................................................................... 19
Chapter 7: Regulatory Information
Chapter 8: Warranty Information
....................................................................... 25
................................................................... 21
User Manual: 2740L
SW602096 Rev A, Page 3 of 27
Chapter 1: Introduction
Product Description
Your new touchmonitor combines the reliable performance of Elo Touch Solutions touch
products with the latest developments in touch technology and display design. This combination
of features creates a natural flow of information between a user and the touchmonitor.
This widescreen touchmonitor incorporates a 24-bit color, active matrix thin-film-transistor LCD
panel to provide high quality display performance. Its Full HD resolution of 1920x1080 is
suitable for displaying graphics and images. Its LED backlight significantly reduces power
consumption and eliminates mercury (compared to CCFL-backlit panels). Other features that
enhance this LCD monitor’s performance are Plug & Play compatibility and on-screen display
(OSD) controls.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to
maximize the life of your unit and prevent risks to user safety. See the Safety & Maintenance
chapter for more information.
This manual contains information that is important for the proper setup and maintenance of the
unit. Before setting up and powering on your new touchmonitor, read through this manual,
especially the Installation, Mounting, and Operation chapters.
User Manual: 2740L
SW602096 Rev A, Page 4 of 27
Chapter 2: Installation
Unpacking the Touchmonitor
Open the carton and verify that the following items are present:
• Touchmonitor with protective sheet for its face
• User Manuals CD
• Japanese language regulatory information pamphlet
• Quick Install Guide
• VGA cable
• DVI cable
• USB cable (not available for ET2740L-0NXX models)
• Mounting brackets
• OSD remote
User Manual: 2740L
SW602096 Rev A, Page 5 of 27
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the DVI or VGA video cables between the monitor’s DVI/VGA input connectors and
your DVI/VGA video source. Tighten the video cable’s screws for best performance.
2. Connect the USB touch cable between the monitor’s USB connector and your PC’s USB
port. (Not applicable for ET2740L-0NXX models)
3. Connect a 12VDC power supply to the monitor’s input power jack.
4. The touchmonitor ships in an ON state, video should be displayed on your monitor already.
User Manual: 2740L
SW602096 Rev A, Page 6 of 27
Installing the Touch Technology Software Drivers
Some software installation is required for your touchmonitor to work with your computer.
The drivers are available on the Elo Touch Solutions website.
Visit www.elotouch.com for:
• The most up-to-date touch driver versions
• Additional touch driver information
• Detailed touch driver installation guides
• Touch drivers for other operating systems
Select the applicable driver from the Elo Touch Solutions website and download:
User Manual: 2740L
SW602096 Rev A, Page 7 of 27
For Windows XP installations, install the “USB Touchscreen Drivers” when prompted:
User Manual: 2740L
SW602096 Rev A, Page 8 of 27
For Windows 7 installations, check the “Install driver” box under “Elo USB Interfaces – Other
Touchscreens”
After accepting the end-user license agreement, the drivers will finish installing.
Reboot your computer after the install is complete.
User Manual: 2740L
SW602096 Rev A, Page 9 of 27
Loading...