No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems.
Disclaimer
The information in this document is subject to change without notice. Elo TouchSystems makes no representations or warranties with
respect to the contents hereof, and specifi cally disclaims any implied
warranties of merchantability or fi tness for a particular purpose. Elo
TouchSystems reserves the right to revise this publication and to
make changes from time to time in the content hereof without obligation of Elo TouchSystems to notify any person of such revisions or
changes.
Trademark Acknowledgments
IntelliTouch, APR (Acoustic Pulse Recognition), Elo TouchSystems,
TE Logo, and Tyco Electronics are trademarks. Other product names
mentioned herein may be trademarks or registered trademarks of their
respective companies. Elo TouchSystems claims no interest in trademarks other than its own.
Your new Elo TouchSystems 2240L open-frame touchmonitor combines the reliable performance of touch technology with the latest
advances in Liquid Crystal Display (LCD) design. The monitor comes
with the following features:
C H A P T E R
1
INTRODUCTION
• 22” color active matrix thin-fi lm-transistor (TFT) with a native resolution of 1680 X 1050.
Precautions
• Available in Acoustic Pulse Recognition (APR), IntelliTouch, SecureTouch, and Surface Capacitive touch
technologies.
• All monitors have VGA video data inputs and some
models also include DVI-D video data inputs.
• All touch technologies come with USB and serial
interfaces.
For more detailed information, please visit our website:
www.elotouch.com.
Follow all warnings, installation, and maintenance recommendations
in this manual to ensure operator safety and maximize the life of the
monitor. See Appendix A (page 27) for information on touchmonitor safety. Before setting up and turning on your touchmonitor, read
through this manual, especially Chapter 2 (Installation and Setup), and
Chapter 3 (Operation).
Elo TouchSystems 2240L User Guide 5
C H A P T E R
2
INST ALLATION AND SETUP
This chapter discusses how to install and set up the LCD touchmonitor
and how to install Elo TouchSystems driver software.
Elo TouchSystems 2240L User Guide 6
Unpacking Your Touchmonitor
Check that the following items are present:
AND/
OR
Touchmonitor
(including integrated
OSD control)
AND/
VGA Video Cable
OR
Serial Cable
DVI-D Cable
(not included with
some European or
Asian models)
USB Cable
Power Cable
(appearance of cable
differs according to
region)
OSD Remote Control Box
Accessory (optional)
Mounting Brackets
(quantity: four)
Elo TouchSystems 2240L User Guide 7
TouchTools CD and Quick
Install Guide
Connecting the Cables to the Touchmonitor and Computer
Connector Panel on Rear Side of Monitor
LED
Status
Power
Button
Power Cable
Serial Cable
OSD
Remote
Control
Box
Connector
(Optional)
USB
Cable
DVI-D Cable
(not included
with some
European
models)
Analog Video
Cable
To connect your touchmonitor to your computer and power
source:
1 Connect one end of the power cable to the connector panel and
the other end to the power outlet.
2Connect either the USB cable OR the serial cable to the rear
panel of the monitor. Note: Do not use both. Connect the other
end to your computer.
3Connect the video cable and/or the DVI-D cable to the rear panel
of the monitor. Tighten by turning the two thumb screws clockwise
to ensure proper grounding. Connect the other end to your
computer.
4Connect one end of the OSD remote control box connector to
the rear panel of the monitor and the other end to your computer.
5Press the power button to turn the monitor on.
Elo TouchSystems 2240L User Guide 8
Installing the Touch Driver
Your Elo touchmonitor is Plug-and-Play compliant. Information on
the video capabilities of the touchmonitor is sent to the video display
adapter when the computer’s operating system starts. If the computer’s operating system detects the touchmonitor, follow the instructions
on the screen to install a generic Plug-and-Play monitor.
Elo TouchSystems touchscreen driver software that allows your touchmonitor to work with your computer is located on the enclosed CD.
The latest versions of drivers and driver information for all operating
systems, including those that are not included with the CD, are available on the Elo TouchSystems website at www.elotouch.com/sup-port/downloads/.
To install the Touch Driver, follow the steps below:
1Insert the TouchTools or APR CD in your computer’s CD-ROM
drive.
2 Click on Install Driver for This Computer.
3 Follow the on-screen instructions to complete the installation.
If there are no on-screen instructions when you install the
TouchTools or APR CD:
1 Click Start > Run.
2 Click the Browse button to locate the EloCd.exe program
on the CD-ROM.
3 Click Open, then OK to run EloCd.exe.
4 Follow the directions on the screen to complete the driver
installation.
Elo TouchSystems 2240L User Guide 9
Monitor Overview and Dimensions (IntelliTouch Model)
Note:
Detailed mechanical illustrations can be found at: www.elotouch.com
Elo TouchSystems 2240L User Guide 10
Monitor Overview and Dimensions (Surface Capacitive Model)
Elo TouchSystems 2240L User Guide 11
Monitor Mounting and Orientation
When the monitor is mounted in the landscape orientation, the cable
connection panel must be at the bottom, as shown in the illustration
below.
Rear View of Monitor—Landscape Orientation
Top
Bottom
Alternatively, the monitor may be mounted in the portrait orientation.
For this orientation, the cable connection panel may be on either side,
as shown in the illustrations below.
Rear View of Monitor—Portrait Orientation
Cable Connection
Cable Connection Panel
Elo TouchSystems 2240L User Guide 12
Loading...
+ 27 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.