Elo TouchSystems 1947L User Manual
Elo Entuitive Touchmonitor
User Guide
19" LCD Kiosk Touchmonitor
1947L Series
Revision B
P/N 008581
Elo TouchSystems, Inc.
1-800-ELOTOUCH
www.elotouch.com
Table of Contents
Chapter 1
Introduction 1
Precautions . . . . . . . . . . . . . . . . . . . . 1
About the Product . . . . . . . . . . . . . . . . . 1
Chapter 2
Installation and Setup 3
Unpacking Your Touchmonitor . . . . . . . . . . . 3
Product Overview . . . . . . . . . . . . . . . . . 4
Main Unit . . . . . . . . . . . . . . . . . . . . 4
Rear View . . . . . . . . . . . . . . . . . . . 4
Bottom View . . . . . . . . . . . . . . . . . . 5
Attaching the L-Brackets . . . . . . . . . . . . . 5
Panel Cut Outs . . . . . . . . . . . . . . . . . . 6
Mounting Options . . . . . . . . . . . . . . . 6
Horizontal Mount . . . . . . . . . . . . . . 7
Vertical Mount. . . . . . . . . . . . . . . . 8
Horizontal Side Mount . . . . . . . . . . . 9
Vertical Side Mount . . . . . . . . . . . . . 9
Touch Interface Connection . . . . . . . . . . . 10
Serial or USB Connection . . . . . . . . . . 10
STEP 1-Connecting the Video Cable . . . 11
STEP 2-Connecting the Serial/USB
Touchscreen Cable . . . . . . . . . . . . 12
Step 3-Connecting the OSD Remote
Cable . . . . . . . . . . . . . . . . . . . 13
STEP 4-Connecting the Power Cable. . . 14
Optimizing the LCD Display . . . . . . . . . . . 15
VESA Mount on Your Touchmonitor. . . . . . . 15
VESA Mounting Interface . . . . . . . . . . 16
Installing the Driver Software . . . . . . . . . . 17
Installing the Serial Touch Driver . . . . . . . 18
Installing the Serial Touch Driver for Windows
XP, Windows 2000, Me, 95/98 and NT 4.0 18
Installing the Serial Touch Driver for MS-DOS
and Windows 3.1 . . . . . . . . . . . . . 19
Installing the USB Touch Driver . . . . . . . 20
Installing the USB Touch Driver for Windows
XP, Windows 2000, Me and 98 . . . . . . 20
Remote OSD Buttons . . . . . . . . . . . . . . 22
OSD Menu Function . . . . . . . . . . . . . . 23
Chapter 4
Troubleshooting 25
Solutions to Common Problems . . . . . . . . 25
Appendix A
Appendix B
Care and Handling of Your Touchmonitor. . . . 30
Appendix C
Compatible Video Modes . . . . . . . . . . . . 31
19" LCD Touchmonitor (ET1947L-XXWC-1)
Specifications . . . . . . . . . . . . . . . . . 32
IntelliTouch Touchmonitor Specifications . . 33
AccuTouch Touchmonitor Specifications. . . 35
19" LCD Touchmonitor (ET1947L-XXWA-1)
Dimensions . . . . . . . . . . . . . . . . . . 36
Front Dimensions . . . . . . . . . . . . . . 36
Rear Dimensions . . . . . . . . . . . . . . 37
Regulatory Information 39
Warranty 43
Index 45
Chapter 3
Operation 21
About Touchmonitor Adjustments . . . . . . . . 21
Using the On-Screen Display (OSD) Menus . . 21
iii
Copyright © 2004 Elo TouchSystems Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written
permission of Elo TouchSystems.
Disclaimer
The information in this document is subject to change without notice. Elo TouchSystems makes no
representations or warranties with respect to the contents hereof, and specifically disclaims any
implied warranties of merchantability or fitness for a particular purpose. Elo TouchSystems reserves
the right to revise this publication and to make changes from time to time in the content hereof
without obligation of Elo TouchSystems to notify any person of such revisions or changes.
Trademark Acknowledgments
IntelliTouch, SecureTouch, AccuTouch, Entuitive, and MonitorMouse are trademarks of Elo
TouchSystems, Inc.
Other product names mentioned herein may be trademarks or registered trademarks of their
respective companies. Elo TouchSystems claims no interest in trademarks other than its own.
iii
Congratulations on your purchase of an Elo TouchSystems Entuitive
touchmonitor. Your new touchmonitor combines the reliable performance of
Elo’s touch technology with the latest advances in LCD display design. This
combination of features creates a natural flow of information between a user
and your touchmonitor.
Precautions
C HAPTER
1
C
HAPTER
1
I
NTRODUCTION
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit. See Appendix B for more
information on touchmonitor safety.
About the Product
Your LCD Kiosk Touchmonitor is a 19" SXGA TFT color display with the
following features:
• Direct analog RGB or Digital input
• 19.0" diagonal screen size
• 16.7 million displayable colors
• 1280 x 1024 resolution
• SXGA/ XGA/ SVGA/ VGA/VESA/ Mac compatible
• 30kHz~80 horizontal scan
• 56~75Hz refresh rate
1-1
• Auto adjustment capability
• High quality full screen re-scaling
• Multilingual OSD menus in 11 languages: English, Spanish, German,
French, Italian, Swedish, Finnish, Danish, Dutch, Portuguese, and Japanese
• Serial or USB touch interface (USB requires Windows 98, 2000, Me and
XP.)
• Patented touch technology of Elo TouchSystems
• VESA DDC 1/2B data communication
• VESA DPMS power saving
• Cable management device
• VESA flat panel monitor physical mounting interface (Both of 75 & 100mm)
For full Product Specifications refer to Appendix C.
1-2 Elo Entuitive Touchmonitor User Guide
C
HAPTER
2
I
NSTALLATION AND
This chapter discusses how to install your LCD touchmonitor and how to install
Elo TouchSystems driver software.
Unpacking Your Touchmonitor
Check that the following 10 items are present and in good condition:
C HAPTER
2
S
ETUP
LCD Display
Quick Install Guide
CD
Software
User Guide-on CD,
Quick Install Guide
and software CD
OR
cable
Video cable
Adapter
Use only an AD-4515L power adapter with this product.
DVI-D video cable
European monitor
power cable
Serial touchscreenUSB touchscreen
cable
OSD Remote
Monitor power cable
(US/Canada)
2-3
Product Overview
Main Unit
Rear View
2-4 Elo Entuitive Touchmonitor User Guide
Bottom View
video
analog
connector
Use only an AD-4515L power adapter
with this product.
Attaching the L-Brackets
touch
serial/USB
connector
video
DVI -D
connector
See Detail A
remote
OSD
connector
monitor power/
touch status
LED indicators
Detail A
power
button
power
connector
N
OTE
:
You will need a screwdriver to attach the L-brackets.
Your kiosk touchmonitor comes with two mounting brackets (L-brackets)
included in the accessory kit. There are four ways to mount your touchmonitor;
horizontal, vertical, horizontal side mount, and vertical side mount. Please refer
to “VESA Mount on Your Touchmonitor” on page 2-15 for VESA mounting
information.
L bracket
2-5
Panel Cut Outs
Mounting Options
The following applies to all mounting options:
1 All drawing centers are the center of the viewable area.
2 LCD panel cutout dimensions in the horizontal mount option applies to the
vertical mount option.
3 If the kiosk material is wood:
1 Ø4.5 holes through for M4 screws with nuts.
2 If there are no through holes then screws for wood Ø4.
4 If the kiosk material is sheet metal, use concealed head threaded studs M4
with nuts.
NOTE:
Dimensions are for non-touch, AccuTouch and IntelliTouch only. For SecureTouch add
4mm to each dimension.
2-6 Elo Entuitive Touchmonitor User Guide
Horizontal Mount
TOP
HORIZONTAL MOUNT
2-7
Vertical Mount
TOP
VERTICAL MOUNT
2-8 Elo Entuitive Touchmonitor User Guide
Horizontal Side Mount
HORIZONTAL SIDE MOUNT
Vertical Side Mount
VERTICAL SIDE MOUNT
2-9
Touch Interface Connection
Your touchmonitor comes with one of the following touchscreen connector
cables: Serial (RS-232) cable or USB cable. (For Windows 98, 2000, Me and
XP systems only.)
To set up this display, please refer to the following figures and procedures:
Serial or USB Connection
The following illustrations guide you step by step in connecting your
touchmonitor using a serial cable connection.
CAUTION
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and the touchmonitor are turned off.
touch
serial/USB
connector
video
analog
connector
video
DVI -D
connector
connections on underside
Use only an AD-4515L power adapter
with this product.
2-10 Elo Entuitive Touchmonitor User Guide
remote
OSD
connector
monitor power/
touch status
LED indicators
power
button
power
connector
STEP 1-Connecting the Video Cable
Connections on underside
Female 15-pin
video
connector
Video
cable
Video
port
• Connect the 15-pin video cable (the ferrite bead end) or 24-pin DVI cable to
the video port on your PC.
• Connect the other end of the video cable to the video connector on your
touchmonitor.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector clockwise.
2-11
STEP 2-Connecting the Serial/USB Touchscreen Cable
Connections on underside
Serial/USB
touchscreen
connector
Serial
touchscreen
cable
video cable
• Connect the female end of the serial (RS-232) or USB cable to the
touchscreen port on the back of your PC.
• Connect the male end of the cable to the serial or USB touchscreen connector
on your touchmonitor.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector.
• Route the cable through the cable management clip.
2-12 Elo Entuitive Touchmonitor User Guide
Loading...