No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written
permission of Elo TouchSystems.
Disclaimer
The information in this document is subject to change without notice. Elo TouchSystems makes no
representations or warranties with respect to the contents hereof, and specifically disclaims any
implied warranties of merchantability or fitness for a particular purpose. Elo TouchSystems reserves
the right to revise this publication and to make changes from time to time in the content hereof
without obligation of Elo TouchSystems to notify any person of such revisions or changes.
Trademark Acknowledgments
IntelliTouch, SecureTouch, AccuTouch, Entuitive, and MonitorMouse are trademarks of Elo
TouchSystems, Inc.
Other product names mentioned herein may be trademarks or registered trademarks of their
respective companies. Elo TouchSystems claims no interest in trademarks other than its own.
Congratulations on your purchase of an Elo TouchSystems Entuitive
touchmonitor. Your new touchmonitor combines the reliable performance of
Elo’s touch technology with the latest advances in LCD display design. This
combination of features creates a natural flow of information between a user
and your touchmonitor.
Precautions
C HAPTER
1
C
HAPTER
1
I
NTRODUCTION
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit. See Appendix B for more
information on touchmonitor safety.
About the Product
Your LCD Desktop Touchmonitor is a 15.1” XGA TFT color display with the
following features:
• Direct analog RGB input
• 15.0” diagonal screen size
• 16.7 million displayable colors
• 1024 x 768 resolution
• XGA/ SVGA/ VGA/ VESA/ Mac compatible
• 30kHz~62 horizontal scan
• 56~75Hz refresh rate
1-1
• Auto adjustment capability
• High quality full screen re-scaling
• Multilingual OSD menus in four languages: English, French, German,
Spanish, and Japanese
• Serial or USB touch interface (USB requires Windows 98, 2000, Me and
XP.)
• Built in speakers
• Patented touch technology of Elo TouchSystems
• VESA DDC 1/2B data communication
• VESA DPMS power saving
• Stand with minimum 45° angle of tilt.
• Cable management device
• VESA flat panel monitor physical mounting interface (75mm)
• OSD and Power button lockouts
For full Product Specifications refer to Appendix C.
1-2Elo Entuitive Touchmonitor User Guide
C
HAPTER
2
I
NSTALLATION AND
This chapter discusses how to install your LCD touchmonitor and how to install
Elo TouchSystems driver software.
Unpacking Your Touchmonitor
Check that the following 8 items are present and in good condition:
C HAPTER
2
S
ETUP
cable
LCD Display
European monitor power cable
Quick Install Guide
CD
Software
Speaker Cable
User Guide-on CD,
Quick Install Guide and software CD
OR
Serial touchscreenUSB touchscreen
cable
Video cable
Speaker cable
Monitor power cable
(US/Canada)
2-3
Product Overview
Main Unit
Rear View
LCD Display
Stand
2-4Elo Entuitive Touchmonitor User Guide
Side View
User Controls
Base Bottom View
2-5
Touch Interface Connection
N
OTE
:
Your interface cables may have been pre-connected to your monitor at the factory.
Your touchmonitor comes with one of the following touchscreen connector
cables: Serial (RS-232) cable or USB cable. (For Windows 98, 2000, Me and
XP systems only.)
To set up this display, please refer to the following figures and procedures:
Serial Connection
The following illustrations guide you step by step in connecting your
touchmonitor using a serial cable connection.
CAUTION
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and the touchmonitor are turned off.
Serial touchscreen
cable
Removable back cover
Speaker
port
Powe r
Connections on underside
Video cable
Female 9-pin serial
Touchscreen
connector
Female 15-pin
video
connector
Speaker
cable
Monitor
power cable
(US/Canada)
European monitor
power cable
2-6Elo Entuitive Touchmonitor User Guide
STEP 1-Removing the Back Cover
Bottom cut-out
• The cables are routed through the back of the stand.
• To remove the back cover, place one hand at the top of the stand and your
other hand on the bottom cut-out.
• Pull forward from the bottom cut-out and twist the cover until it snaps off.
The cable ports are located on the underside of your touchmonitor.
2-7
STEP 2-Connecting the Video Cable
Connections on underside
Female
video
connector
Cable management clip
Video
cable
Video
port
Ferrite bead
• Tilt the screen up and back to access the connection ports.
• Connect the 15-pin video cable (the ferrite bead end) to the video port on
your PC.
• Connect the other end of the video cable to the video connector on your
touchmonitor by routing the cable through the hole in the stand.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector clockwise.
• Place the cable in the cable management clip.
2-8Elo Entuitive Touchmonitor User Guide
STEP 3-Connecting the Serial Touchscreen Cable
Connections on underside
Female 9-pin Serial
Touchscreen
connector
Serial
Touchscreen
cable
• Connect the female end of the serial (RS-232) cable to the serial port on the
back of your PC.
• Connect the male end of the cable to the serial touchscreen connector on your
touchmonitor.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector.
• Route the cable through the cable management clip.
2-9
N
STEP 4-Connecting the Speaker Cable
OTE
:
If you do not wish to connect the speaker cable, go to step 5.
Speaker
cable
Connections on underside
Speaker port
• To use the built in speakers, you need to connect the speaker cable. Connect
the speaker cable to the speaker port inside the back of your touchmonitor.
• Connect the other end of the cable to the speaker connector on your PC.
2-10Elo Entuitive Touchmonitor User Guide
STEP 5-Connecting the Power Cable
Connections on underside
AC power cable port
Cable management clip
Power cable
Depending on where you live, you will use either the European or US/Canadian
power cable.
• Connect the female end of the power cable to the power port on the
touchmonitor.
N
• Route the cable through the cable management clip.
OTE
:
To protect your equipment against risk of damage from electrical surges in the power
line, plug the touchmonitor’s power cord into a surge protector, and then connect the
surge protector to a grounded AC electrical outlet.
STEP 6-Replacing the Back Cover
When all the cables have been connected:
• Replace the back stand cover.
• Power on your PC then your touchmonitor. After a brief pause the picture
should appear.
2-11
N
OTE
CAUTION
USB Connection
:
A USB connection can only be used if your PC is running Windows 98, 2000, Me or XP.
The following illustrations guide you step by step in connecting your
touchmonitor using a USB cable connection.
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and the touchmonitor are turned off.
USB touchscreen
cable
Removable
back cover
Speaker port
Connections on underside
USB port
Video cable
Female 15-pin
video
connector
Speaker cable
Monitor
power cable
(US/Canada)
European monitor
power cable
2-12Elo Entuitive Touchmonitor User Guide
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.