USER MANUAL
Elo Touch Solutions
RFID FOR ET3201L/ET4201L AND ET7001L
User Manual– IDS 01 SERIES RFID
Rev A, Page 1 of 3
For ET32
Product Number: RFID MODULE FOR IDS01
Module Part Number: E031451
01L and ET4201L Touchmonitors for:
Locate and remove the access door on the back of the monitor.
Connect the RFID antenna wire and the USB cable from the monitor to the peripheral board.
Place the board in the position where the access door was.
Secure the board into place with the provided screws.
For ET7001L Touchmonitors:
Connect the RFID peripheral to the available USB connection on the side of the monitor.
Above is a side view of the monitor where the peripheral can be mounted.
User Manual– IDS 01 SERIES RFID
Rev A, Page 2 of 3
Loading...