SW601960 Rev E Copyright © 2016 Elo Touch Solutions, Inc. All Rights Reserved.
USER MANUAL
Elo Touch Solutions
32/4243L IDS Touch Displays
2
User Manual – 32/4243L Series IDS
No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by
any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Afffiliates (collectively "Elo") makes no representations or warranties
with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise this
publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments
AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems, IntelliTouch, iTouch, SecureTouch, TouchTools and VuPoint are trademarks
of Elo and its Affiliates. Windows is a trademark of Microsoft Corporation.
3
User Manual – 32/4243L Series IDS
Table of Content
Section 1: Introduction ............................................................................................... 4
Section 2: Installation
................................................................................................. 5
Section 3: Mounting
.................................................................................................... 8
Section 4: Operation
................................................................................................. 14
Section 5: Technical Support
.................................................................................. 20
Section 6: Safety & Maintenance
.......................................................................... 22
Section 7: Regulatory Information
......................................................................... 24
4
User Manual – 32/4243L Series IDS
Section 1: Introduction
Product Descri
ption
Your new touch display combines the reliable performance of Elo Touch Solutions touch products with the latest
developments in touch technology and display design. This combination of features creates a natural flow of
information between a user and the touch display.
This widescreen touch display incorporates a 24-bit color, active matrix thin-film-transistor LCD panel to provide high
quality display performance. Its Full HD resolution of 1920x1080 is suitable for displaying graphics and images. Its LED
backlight significantly reduces power consumption and eliminates mercury (compared to CCFL-backlit panels). Other
features that enhance this LCD monitor’s performance are Plug & Play compatibility and on-screen display (OSD)
controls.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to maxi mize the life of your unit
and prevent risks to user safety. See the Safety & Maintenance Section for more information.
This manual contains information that is important for the proper setup and maintenance of the unit. Before setting up and powering
on your new touch display, read through this manual, especially the Installation, Mounting, and Operation Sections.
5
User Manual – 32/4243L Series IDS
Section 2: Installation
Unpacking the Touch display
Open the carton and verify that the following items are present:
Touch display
Mounting br
ackets
Quick Install Guide
VGA cable
HDMI cable (ETX243L-XXWA models only)
DVI cable (ETX243L-XXAA models only)
USB cable (not available for ETX243L-0NXX models)
Internation
al power cables
OSD Remote
Japanese language regulatory information pamphlet
User Manual – 32/4243L Series IDS 6
Connector Panel & Interfaces
Note: DVI or HDMI are available on certain models only.
Touch display Connections
1. Connect a video cable from your host computer to the monitor. For VGA cables, tighten the video cables
screws for best performance.
2. Connect the USB touch cable between the monitors USB connector and your PC’s USB port. (Not
applicable for No Touch models)
3. Connect the power cable to the monitors input power jack and the AC power outlet.
4.
The touch displa
y ships in the ON state.
User Manual – 32/4243L Series IDS 7
Installing the Touch Technology Software Drivers
No ad
ditional drivers are required for your projected-capacitive touch display with Windows 7 and 8 operating systems, it uses Windows HID drivers.
To download latest touch drivers:
1.
Visit elotouch website.
2. Select the operating system from “Operating System” dropdown menu.
3. Select the technology from “Te chn ologies” dropdown menu.
4. Click on the driver version r equired for your touch display.
5. Click “A ccept” once you are directed to the “Driver License Agreement” page.
6. Enter you email address, Click on “Next Step”. Your driver download will start automatically.
7. If you are a new user, fill in the requi red information and Click on “Register”. Your driver download will start automatically.
User Manual – 32/4243L Series IDS 8
Section 3: Mounting
General Mounting Infor
mation
The OSD text can be rotated between portrait and landscape mode through the OSD menu to better suit your mounting orientation.
Portrait and Landscape Mode
The monitor can only be installed in portrait or landscape mode following the below diagram. The THIS END UP sticker will point up.
User Manual – 32/4243L Series IDS 9
For Elo Part Numbers E220625, E589724, and E444804:
Portrait mode can only be installed in the 90 degrees orientation such that the Elo logo on the back is rotated to the right and the cables are connected from the
left side, as the following image shows.
Landscape mode can only be installed at 0 degrees such that the Elo logo is on the back is not rotated and the cables are connected from the bottom, as the
image below shows.
Insert cables from
this side
Loading...