Elo Touch Solutions ET1517L, ET1717L Service Manual

US054952 - 2012-09-28T00:54:02Z

Service Manual

Elo Touch Solutions

ET1517L and ET1717L Touchmonitors

Part Description umber Part N
ET1517L-7UWA-1 -GY-ZB-G E999454
ET1517L-7UWA-1 -WH-ZB-G E247852
ET1517L-8UWA-0 -GY-ZB-G E953836
ET1517L-8UWA-0 -WH-ZB-G E291747
ET1717L-7UWA-1 -GY-ZB-G E433551
ET1717L-7UWA-1 -WH-ZB-G E650075
ET1717L-8UWA-0 -GY-ZB-G E928533

Second Edition (July, 2012)
© Copyright © 2012 Elo Touch Solutions, Inc. All Rights Reserved.

ET1717L-8UWA-0 -WH-ZB-G E854392

ES600904 Rev A

Revision History

US054952 - 2012-09-28T00:54:02Z

Rev Author Date Description

A Ruby Chen

August 10,

2012

Initial release per ECO-12-014715

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 2 of 44

Table of Contents

US054952 - 2012-09-28T00:54:02Z

1. ............................................................................................................. 4 Product Overview

1.1. .......................................................................................... 4 Specification overview

1.2. .............................................................................................. 5 Interface Functions

1.3. .......................................................................................... 5 Software Specification

1.4. ......................................................................................................... 21 EDID Code

2. ................................................... 22 Level 1 Cosmetic / Appearance / Alignment Service

2.1. Firmware and EDID Upgrade Process............................................................... 22

2.2. Alignment procedure (for function adjustment)................................................... 32

3. ... 34 Level 2 Disassembly /Assembly Circuit Board and Standard Parts Replacement

3.1. Parts list ............................................................................................................. 34

3.2. Packing drawing................................................................................................. 38

3.3. Trouble Shooting Guide ..................................................................................... 40

3.4. Circuit Operation Theory.................................................................................... 42

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 3 of 44

1. Product Overview

US054952 - 2012-09-28T00:54:02Z

1.1. Specification overview

Model Name ET1517L ET1717L

17”

CMI / AUO

5:4

Panel

Platform
Solution

Power

LCD Size 15"
LCD Vendor CMI / AUO
Panel Model No G150XGE-L04 / G150XG03 V5
Active Area (mm) 304.128(H) x 228.096(V)
Resolution XGA 1024 x 768 (pixels)
Aspect Ratio 4:3
Brightness (typ)/(min) 250 nits (typ.)/200 nits (min)
Contrast Ratio (typ.) 700:1 (typ.) 800:1 (typ.)
Response Time (ms) 8ms (typ.)/ 16max 5ms (typ.)/ 10max
Pixel Pitch 0.297mm 0.264mm
Viewing Angle 160 degree (H) / 140 degree (V) 170 degree (H) / 160 degree (V)
Panel Bit (8 or 10) 8bit (16.2M) 8bit (16.7M)

Scalar Realtek 2281W Realtek 2281W
Voltage 100 V ~ 240 V, 50 Hz / 60 Hz 100 V ~ 240 V, 50 Hz / 60 Hz

Maximun (Watt) <10W <21W
Standby (Watt) <1.1W <1.1W

M170EGE-L20 / G170EG01-V1

337.920 (H)x 270.336(V)

XGA 1280 x 1024 (pixels)

300 nits (typ.)/250 nits (min)

Environment

Power Off (Watt) <1.0W <1.0W
Operation Temp (dC) 0°C ~ 40°C 0°C ~ 40°C
Storage Temp (dC) -20°C ~ 60°C -20°C ~ 60°C

Storage Humidity 10% ~ 90% RH Non-Condensing 10% ~ 90% RH Non-Condensing
Operating Humidity 20% ~80% RH Non-Condensing 20% ~80% RH Non-Condensing
Operating Altitude 0 ~ 10,000 feet[ 3048m] 0 ~ 10,000 feet[ 3048m]
Non-operating 0 ~ 35,000 feet[ 10,668m] 0 ~ 35,000 feet[ 10,668m]

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 4 of 44

1.2. Interface Functions

US054952 - 2012-09-28T00:54:02Z

1.2.1 VGA

The monitor will be able to display analog RGB component video when inputted to the DE-15
VGA connector. It shall comply with the VESA DDC/CI standard.

1.2.2 DVI

No DVI connector for this product.

1.2.3 LED indicator
Condition

(Applies to Monitor or Monitor with

Computer Module)

OFF OFF
SLEEP PULSING
ON ON

LED status

1.3. Software Specification

1.3.1 Compliant Timing

ET1515L ET1717L
Preset Video Modes

(input video modes which won’t
require user adjustments to
image)(refer to SW600637 for
detailed timing parameters)

Input Video Horizontal Frequency

(outside these ranges, monitor will
permanently display an Out Of Range
message)

Input Video Vertical Frequency

(outside these ranges, monitor will
permanently display an Out Of Range
message)

640x480 60Hz,75Hz
720x400 70Hz
800x600 56Hz,60Hz,75Hz
1024x768 60Hz,75Hz

31.5 – 80 KHz 31.5 – 80 KHz

56 – 75 Hz 56 – 75 Hz

640x480 60Hz,75Hz
720x400 70Hz
800x600 56Hz,60Hz,75Hz
1024x768 60Hz,75Hz
1280x1024 60Hz,75Hz

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 5 of 44

1.3.2 OSD Table

US054952 - 2012-09-28T00:54:02Z

0.0 HotKey

Button

Function when OSD is not displayed:

Menu Display OSD main menu

Display OSD Brightness submenu

Function when OSD is
displayed:
Return to previous OSD menu

Increase value of selected

+

Display Audio submenu(If support Audio)

-

parameter /
select previous menu item

Decrease value of selected
parameter /
select next menu item

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 6 of 44

Display Contrast submenu(If not support Audio)

US054952 - 2012-09-28T00:54:02Z

Decrease value of selected

-

Select

Select

parameter /
select next menu item

Auto Adjusting(If not support dual version)

Select parameter for
adjustment /
select submenu to enter

Input Select Menu(If support dual version)

Select parameter for
adjustment /
select submenu to enter

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 7 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

1.0 Main Menu

1. When Main Menu is not displayed, Press
“Menu” then main menu will display.

2. The OSD position should be on the right
bottom and the buttons on OSD should be
aligning to the physical buttons on the bottom.

Yes/No

Yes

1. Audio item will be disappeared if audio
function is not supported.

2. The OSD position should be on the right
bottom and the buttons on OSD should be
aligning to the physical buttons on the bottom.

1. Press the “Menu” and “-” keys for two
seconds to toggle the monitor’s Power
Locking feature between locked and
unlocked. This feature allows end-users no
access to the monitor’s power controls. The
OSD will show an “Power Locked” message
for 5 seconds when becoming locked, and
will show an “Power Unlocked” message for 5
seconds when becoming Yes unlocked.

While the power is locked, pressing the power

switch will have no effect on the monitor.

Default setting is unlocked.

Yes

Yes

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 8 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

Yes/No

1. When “Power Locked”, the “power” button
will be disappeared.

Yes

1. Press the “Menu” and “+” keys for two
seconds to toggle the monitor’s OSD Locking
feature between locked and unlocked. This
feature allows end-users no access to the
monitor’s OSD controls. The OSD will show
an “OSD Locked” message for 5 seconds
when becoming locked, and will show an
“OSD Unlocked” message for 5 seconds
when becoming unlocked.
While the OSD is locked, pressing any of the
“Menu”, “+”, “-“, or “Select” keys will have no
effect on the OSD.
Default setting is unlocked.

1.1 Auto Adjust Menu
Automatically adjusts the system clock to the input analog RGB video signal, affecting the

H-position, V-position, Clock, and Phase menu items. This adjustment is only available on
VGA input video.

1. There is an “Auto Adjusting” message when
executing “Auto Adjust” on the center of the
screen until finishing.

Yes

Yes

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 9 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

1.2 Luminance Menu

1. Show brightness & contrast value on this
menu.

Yes/No

Yes

1.2.1 Brightness
Adjusts the Brightness signal from 0% (minimum brightness) to 100% (maximum

brightness) of its range on a scale from 0 to 100 using at least 25 discrete steps. Default:
100% (maximum brightness)

1. ”Up” & “Down” Icons will be “+”&”-“ on this
menu

2. Show the brightness value and gauge.
Note: Please follow the panel specification to

define the maximum and minimum of the
brightness.

1.2.2 Contrast
Adjusts the contrast of the video signal (gain of the A/D) from 0% (minimum) to 125%

(maximum) on a scale from 0 to 100 using at least 25 discrete steps. Default: 50 that
setting which will clearly display a 25-step gray shade pattern.

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the contrast value and gauge.

Yes

Yes

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 10 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

1.3 Image Setting Menu(VGA input source)

1. Show H. Position & V. Position & Clock &
Phase & Sharpness value on this menu.

Yes/No

No

1.3 Image Setting Menu(DVI input source)
No

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 11 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

Yes/No

If VGA input Only, Please remove Input Select Yes

1.3.1 Input Select Menu
No

1.3.2 H. Position

Moves the image horizontally in single-pixel increments on a scale from 0 to 100 using at
least 100 discrete steps. Default: 50 (centered in the panel). This adjustment is only
available on VGA input video.

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the H. Position value and gauge.

Yes

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 12 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

1.3.3 V. Position

Moves the image vertically in single-pixel increments on a scale from 0 to 100 using at
least 50 discrete steps. Default: 50 (centered in the panel). This adjustment is only
available on VGA input video.

Yes/No

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the V. Position value and gauge.

1.3.4 Clock

Adjusts the ratio of dividing frequency of the dot clock on a scale from 0 to 100 using at
least 100 discrete steps. Default: That setting which will display alternating black and
white vertical lines without aliasing. This adjustment is only available on VGA input video.

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the Clock value and gauge.

Yes

Yes

1.3.5 Phase

Adjusts the phase of the panel dot clock with respect to panel data on a scale from 0 to
100 using at least 25 discrete steps. Default: determined/optimized by system clock. This
adjustment is only available on VGA input video.

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the Phase value and gauge

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 13 of 44

Yes

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

1.3.6 Aspect Ratio

Switches the scaling method between two options:
Full Scaling – scales the X- and Y-dimensions of the input video (up or down as needed)
to the display’s native resolution. (Default)
Fill To Aspect Ratio – Assuming a landscape orientation and an input video with aspect
ratio smaller than 16:9, scales the Y-dimension of the input video (up or down as
needed) to the display’s Y-resolution, and scales the X-dimension to maintain the aspect
ratio (and fills the rest of the display with equal black bars on the left and right).

Note: Intellitouch and Accutouch screens may need recalibration when switching
between the options. APR screen functionality is only guaranteed at “Full Scaling”.

Yes

Yes/No

1.3.7 Sharpness

Adjusts sharpness of video signals on a scale from -2 to 2 using 5 steps. Default: 0 (no
sharpness correction).
Note: This adjustment only available when input video does not meet monitor’s native
resolution.

1. Show the sharpness value. Yes

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 14 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

1. Sharpness will be disable if native
resolution.

1.4 Color Menu

Adjusts color temperature. Color temperature options shall be 9300K, 7500K, 6500K,
5500K, and User Defined. If the User Defined option is selected, the user shall be able to
change the color temperature by changing individual R, G, and B gains on a scale from 0
to 100. Default: User Defined (R,G,B values of 100, 100, 100)

1. Default is “User Preset”.

Yes/No

Yes

Yes

1.4.1 User Preset Menu

1. Show Red & Green & Blue value on this
menu.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 15 of 44

Yes

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

Yes/No

1.4.1.1 Red

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the Red value and gauge.

1.4.1.2 Green

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the Green value and gauge.

1.4.1.3 Blue

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the Blue value and gauge.

Yes

Yes

Yes

1.5 OSD Menu

1. Show OSD Timeout value on this menu.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 16 of 44

Yes but

no

rotation

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

Yes/No

1.5.1 Rotation
No

1. When press “Portrait” then all menu will
rotate 90 degrees clockwise.

1.5.2 OSD Timeout

Adjusts the OSD timeout time. OSD setting changes made prior to the OSD timeout are
kept and used. At a minimum, the user shall be able to select options between 5 to 60
seconds. Default: 15 seconds.

No

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the Timer value and gauge.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 17 of 44

Yes

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

1.5.3 Language

Selects which language the OSD information is displayed in. Options shall be: English,
French, Italian, German, Spanish, Simplified Chinese, Traditional Chinese and
Japanese. Default: English.

Yes

Yes/No

1.5.4 Information
Yes

1.6 Recall Menu

Selecting “Recall Defaults” shall restore all factory default settings for OSD-adjustable
parameters (except OSD Language and OSD Location) and for the Preset Video Modes’
timings.

1.default is No. Yes

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 18 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

Yes/No

1. There is a “Recalling” message when
executing “Recall defaults” on the center of the
screen until finishing.

1.7 Audio Menu
No

Yes

1.7.1 Mute

Toggles the audio output between Muted and Not Muted. Default: Not Muted

1.”+”&”-“ are disable on this menu. No

1.7.2 Volume

Adjusts the volume (of the internal speakers or the headphones) from 0 Watt to 2 Watt
x2 on a scale from 0 to 100. Default: a comfortable setting for maximum input levels.

1. ”Up” & “Down” Icons will be “+”&”-“ at this
menu.

2. Show the Volume value and gauge.

No

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 19 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

Yes/No

1.8 Factory Menu

1. If the unit is turned on while the “Select”
button is held, a “Factory” menu will be
available in the OSD. This menu will not be
advertised on customer-facing documentation.

1. Factory menu is display on the left-top
corner of the screen.

2. Function introduction:
Total time of System on – HR & Min
Total time of panel Backlight on –HR&Min

AUTO COLOR: Auto Balance
GAIN: Color Gain Value from R G B
OFFSET: Color Offset Value from R G B
9300K: Tune R G B value on color
temperature 0f 9300K.
7500K: Tune R G B value on color
temperature 0f 7500K.
6500K: Tune R G B value on color
temperature 0f 6500K.
5500K: Tune R G B value on color
temperature 0f 5500K.

SUB BRI: tune sub brightness
SUB CON: tune sub contrast
BURNIN: on/off burn in mode
RESET: Factory Recall
BANK: Register bank value
ADDR : Register Index
VALUE: Register Index Value

MODE INDEX: Indicates what resolution is
now and it’s polar of H&V.

Display panel model name
Scalar IC model and firmware document
number and it’s revision.

Yes

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 20 of 44

Menu Remark Required

US054952 - 2012-09-28T00:54:02Z

Yes/No

1. There is an ”Out of Range” message if the
input signal’s pixel clock is too big.

Yes

1. There is a “No Signal Detected” message if
no input signal.

1.4. EDID Code

All video interfaces shall contain a DDC-accessible EDID V1.3 file with 0 extension blocks. Each
EDID will be write-protected in normal operation. Some basic requirements for the EDID files are:

• Vendor ID: ELO

• Product ID: 1517/1717

• Mfg Week, Mfg Year, a nd 6-digit Serial Number according to monitor’s serial number

• Corresponding supported timing, size, and color information

Yes

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 21 of 44

2. Level 1 Cosmetic / Appearance / Alignment Service

US054952 - 2012-09-28T00:54:02Z

2.1. Firmware and EDID Upgrade Process

2.1.1 Software configuration:

Step 1. Unzip “RTD Customer Tool V1.7 Install_20110301”
Step 2. Click on “RTD Customer Tool V1.7 Install_20110301” to run the program

Step 3.

lick on “Next” when following screen pops up

C

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 22 of 44

Step 4. Click on “Next” when following screen pops up

US054952 - 2012-09-28T00:54:02Z

Step 5. Click on “Next” when following screen pops up

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 23 of 44

Step 6. Wait for update progress and click on “finish” when setup complete screen pops up

US054952 - 2012-09-28T00:54:02Z

If RTD customer tool can’t detect USB ISP BD after you installed SW in PC and checked all Note:

the connection of cables correctly, you can re-boot the PC and try again to solve this problem.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 24 of 44

2.1.2 Hardware configuration:

US054952 - 2012-09-28T00:54:02Z

Step 1. Prepare following items

a. PC with 2K or XP system*1
b. USB cable (A ty

pe to B t

ype) *1
c. D-sub cable *1
d. Power cord *1
e. AC Adaptor *1

RTD USB ISP BD*1

f.

Step 2. Connect the

cables to PC, ET1517L or ET1717L Monitor a
a. Connect USB cable between PC and RTD USB ISP BD
b. Connect VGA cable between monitor and RTD USB ISP BD (VGA OU
c. Connect the power cord firmly to the Monitor and the electrical outlet

a

VGA IN

c

VGA Out

nd RTD USB ISP BD

T)

b

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 25 of 44

2.1.3 FW Update Procedure:

US054952 - 2012-09-28T00:54:02Z

tep 1. Double click on to run “RTD tool Customer V1.7” and check if the connection is OK

S

a. If connection with JIG is OK,

the USB button is green,
otherwise th

b. If Communication with

monitor is OK, the Commu
button is green, otherwise
the color is red

e color is gray.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 26 of 44

Step 2.

US054952 - 2012-09-28T00:54:02Z

Select “ISP”, then, select “Serial Flash”

Step 3.

Click on “IS

P Option” to set appropriate setting for monitor

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 27 of 44

US054952 - 2012-09-28T00:54:02Z

3.1 Sele

ct “Basic Se

tting” to set file type of firmware

Set correct file format in “File type”
Others are default.

3.2 Select “Flash Protect” and set as following

Select “User Define0” in “Flash Protect”
Set “Value” to High
Set “Series” to LPA Series
Set “LPA Series” to Pin27

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 28 of 44

Step 4. to upgrade firmware

US054952 - 2012-09-28T00:54:02Z

Click on “64K” to select the firmware file, then, click on

Step 5.

When finish,

it will show PASS

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 29 of 44

2.1.4 EDID Upgrade Procedure

US054952 - 2012-09-28T00:54:02Z

Step 1. Select “IIC” and key in “6e 51 82 e0 00 5d” as following, then, click on “Send Data” to

disable EDID

Note: DC off monitor when RTD Customer Tool sends write pr

EEPROM write protect.

otect command to monitor

Fill the number
“6e,51,82,e0,00,5d”

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 30 of 44

Step 2. to write EDID.

A

US054952 - 2012-09-28T00:54:02Z

Select “EDID” and click on to open EDID file, then, click on

128B for VG

Open EDID file

Write EDID

Step 3.

It will show “Write EDID OK” after finishing EDID writing.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 31 of 44

2.2. Alignment p or function adjus

US054952 - 2012-09-28T00:54:02Z

The o nt for a L

list f necessary alignme CD monitor:

Items Description Remark

1 Timing adjustment

Auto color balance

2

adjustment

Color temperature

3

rocedure (f tment)

Preset timing
Timing 114 (VGA480)

HZ(640x480@60

)
Burn-In Mode: ON
Pattern: 5-Mosaic pattern #42
9300K/Cool,
7500K

t 6500K/Standard adjustmen

5500K/Warm

2.2.1 Preparation:

1. Setup input timing to any preset modes, any patterns.

2. Enter factory mode (Press “Select” and “Power” button at the same time to turn on monitor)

3. Enter factory OSD (

4. Select Burning ON

5. Plug out AC cable

6. Setup unit and keep it warm up at least 30 minutes.

2.2.2 Auto color balance adjustment:

1. Setup input
signal from Chroma video pattern generator.

2. Enter factory mode (Press “Select” and “Power” button at the same time to turn on monitor

3. Enter fac

. Select “Auto Color”, after ADC calibration OK, factory OSD window will move to middle of

4

screen.

2.2.3 Color temperature adjustment:

1. Setup input timing to any preset modes,
Chroma video pattern generator.

2. Enter factory mode (Press “Select” and “Power” button at the same time to turn on monitor).

3. Make sure ADC calibration (auto color balance adjustment) had already been done.
Measure and adjust color temperatures by CA-210 spectro4.

to the required specification listed in Figure-1 below. Manually adjusting R/G/B gain values
in the factory OSD menu.

timing #114 VGA480 (640x480@60Hz), pattern #42(5-Mosaic)

tory OSD (Press “F” in OSD window left top side).

Press “F” in OSD window left top side)

pattern #42(5-Mosaic)

with analog

with analog signal from

meter (or equivalent equipment)

).

.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 32 of 44

Figure-1

US054952 - 2012-09-28T00:54:02Z

5. Turns off the monitor power.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 33 of 44

3. Level 2 Disassembly /Assembly Circuit Board and Standard Parts

US054952 - 2012-09-28T00:54:02Z

Replacement

3.1. Parts list

ET1517L:

NO.

1 E164518 5F.MU5VP.011 LCDM15 G150XG03-V5 AUO P/G
2 E120875 5F.MM5VP.001 LCDM 15 G150XGE-L04 P E120875
3 E516564 TY.5F900.002 TOUCH CCREEN AT 1517 E516564
4 E892455 TY.5F900.003 TOUCH SCREEN IT 1517 E892455
5 CS.5J1US.001 PACK AD BD 15-AUO EP15TF4
6 CS.5J1US.011 PACK AD BD 15-CMI EP15TF4
7 5E.1UT10.001 PCBA KEYPAD BD EP17TF1
8 E329179 EM.5D900.01R PCBA CTR221800ATRSU00R E329179

9 D68054-000 EM.5D900.005 PCACTR270100ITRSU00RD68054-000
10 3J.1US02.001 BEZEL AT AUO ABS GY EP15TF4
11 3J.1US02.011 BEZEL AT AUO ABS WH EP15TF4
12 3J.1US01.001 BEZEL IT AUO ABS GY EP15TF4
13 3J.1US03.001 CASE BACK ABS BLACK EP15TF4
14 3J.1US03.011 CASE BACK ABS WH EP15TF4
15 3J.1US04.001 CASE MSR BC ABS BLACK EP15TF4
16 3J.1US04.011 CASE MSR BC ABS WH EP15TF4
17 3J.1US05.001 CASE F STAND ABS EP15TF4
18 3J.1US05.011 CASE F STAND ABS WH EP15TF4
19 3J.1US06.001 CASE BACK STAND ABS EP15TF4
20 3J.1US06.011 CASE BACK STAND ABS WH EP15TF4
21 3J.1US07.001 CASE VESA STAND ABS EP15TF4
22 3J.1US07.011 CASE VESA STAND ABS WH EP15TF4
23 3J.1US08.001 CASE BASE STAND ABS EP15TF4
24 3J.1US08.011 CASE BASE STAND ABS WH EP15TF4
25 4B.1US01.001 KEY PAD OSD ABS EP15TF4
26 4B.1US01.011 KEY PAD OSD ABS WH EP15TF4
27 4B.1US02.001 LIGHT PIPE OSD PMMA EP15TF4
28 4G.1US05.001 SPONGE H EP15TF4
29 4G.1US06.001 SPONGE V EP15TF4
30 5K.1US04.001 WIRE LVDS 20/30P 1571 150MM

ELO P/N Qisda P/N Qisda Description

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 34 of 44

31 5K.1US01.001 WIRE 5/5P 1571#28 140MM

US054952 - 2012-09-28T00:54:02Z

32 5K.1US02.001 WIRE 5/6P 1571#28 135MM PANEL
33 5K.1US03.001 WIRE 6/20P 1061#28 90MM TOUCH
34 2E.A123D.W16 ADT SW12V3.33A40W DC UNI LITEO
35 2G.01111.011 CORD SVT125V WO/SH1.8M US DELL
36 2G.05921.011 CORD 0.75 1.8M EU+KOR+RUSS BLK
37 E744255 EM.4J900.002 MANUAL QIG GENERIC TOUCHMONITO
38 4J.1US04.001 SHEET STAND ASSEMBLY 1517
39 E442022 4J.1US05.001 CARD JAPAN CLASSB TM INFO 1517
40 450261-000 EM.5B900.001 CD DMS-TOUCHTOOLS-CD
41 E344038 5B.1UT02.001 CD MONITOR 1717
42 5K.L1E03.501 CABLE USB 2.0A/B B-PVC 1.8M
43 5K.1US06.501 CABLE SIGNAL/C OD5.8 1.8MXINYA
44 4B.1US05.001 BAG PLASTIC 1517
45 E029964 4D.1US01.001 CARTON 1517
46 E945962 4G.1US03.001 CUSHION MOLDED PULP 1517
47 E799920 4G.1US04.001 CUSHION MOLDED PULP T 1517

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 35 of 44

ET1717L:

US054952 - 2012-09-28T00:54:02Z

NO.

1 E149399 5F.MU7VP. 011 LCDM17 G170EG01-V1 AUO

2 E230053 5F.MM7VP.011 LCDM 17 M170EGE-L20 P

3 E086819 TY.5F900.004 TOUCH SCREEN AT 1717 E086819

4 E872607 TY.5F900.005 TOUCH SCREEN IT 1717 E872607

5 CS.5J1UT.001 PACK AD BD 17-AUO EP17TF1

6 CS.5J1UT.011 PACK AD BD 17-CMI EP17TF1

7 5E.1UT10.001 PCBA KEYPAD BD EP17TF1

8 5E.1UT42.001 PCBA DC/DC BD EP17TF1

9 E329179 EM.5D900.01R PCBA CTR221800ATRSU00R E329179
10 D68054-000 EM.5D900.005 PCACTR270100ITRSU00RD68054-000
11 3J.1UT01.001 BEZEL IT AUO ABS GY EP17TF1
12 3J.1UT02.001 BEZEL AT AUO ABS GY EP17TF1
13 3J.1UT02.011 BEZEL AT AUO ABS WH EP17TF1
14 3J.1UT09.001 BEZEL IT CMI ABS GY EP17TF1
15 3J.1UT10.001 BEZEL AT CMI ABS GY EP17TF1
16 3J.1UT10.011 BEZEL AT CMI ABS WH EP17TF1
17 3J.1UT03.001 CASE BACK ABS EP17TF1
18 3J.1UT03.011 CASE BACK ABS WH EP17TF1
19 3J.1UT08.001 CASE BC MSR DOOR ABS EP17TF1
20 3J.1UT08.011 CASE BC MSR DOOR WH EP17TF1
21 3J.1UT04.001 CASE FRONT STAND ABS EP17TF1
22 3J.1UT04.011 CASE F STAND ABS WH EP17TF1
23 3J.1UT05.001 CASE BACK STAND ABS EP17TF1
24 3J.1UT05.011 CASE BACK STAND ABS WH EP17TF1
25 3J.1UT06.001 CASE VESA STAND ABS EP17TF1
26 3J.1UT06.011 CASE VESA STAND ABS WH EP17TF1
27 3J.1UT07.001 CASE BASE STAND ABS EP17TF1
28 3J.1UT07.011 CASE BASE STAND ABS WH EP17TF1
29 4B.1US01.001 KEY PAD OSD ABS EP15TF4
30 4B.1US01.011 KEY PAD OSD ABS WH EP15TF4
31 4B.1US02.001 LIGHT PIPE OSD PMMA EP15TF4
32 4G.1UT03.001 SEAL DUST H EP17TF1
33 4G.1UT04.001 SEAL DUST V EP17TF1
34 5K.1UT04.001 WIRE LVDS 30/30P 1571 150MM
35 5K.1US01.001 WIRE 5/5P 1571#28 140MM
36 5K.1US03.001 WIRE 6/20P 1061#28 90MM TOUCH

ELO P/N Qisda P/N Qisda Description

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 36 of 44

37 5K.1UT01.001 WIRE 6/6P 1571#28 185MM PANEL

US054952 - 2012-09-28T00:54:02Z

38 5K.1UT02.001 WIRE 6/6P 1571#28 230MM PANEL
39 5K.1UT03.001 WIRE 6/6P 1061#28 120MM LED
40 2E.A123D.W16 ADT SW12V3.33A40W DC UNI LITEO
41 2G.01111.011 CORD SVT125V WO/SH1.8M US DELL
42 2G.05921.011 CORD 0.75 1.8M EU+KOR+RUSS BLK
43 E744255 EM.4J900.002 MANUAL QIG GENERIC TOUCHMONITO
44 4J.1US04.001 SHEET STAND ASSEMBLY 1517
45 E442022 4J.1US05.001 CARD JAPAN CLASSB TM INFO 1517
46 450261-000 EM.5B900.001 CD DMS-TOUCHTOOLS-CD
47 E344038 5B.1UT02.001 CD MONITOR 1717
48 5K.L1E03.501 CABLE USB 2.0A/B B-PVC 1.8M
49 5K.1US06.501 CABLE SIGNAL/C OD5.8 1.8MXINYA
50 4B.1UT01.001 BAG PLASTIC 1717
51 E115941 4D.1UT01.001 CARTON 1717
52 E198630 4G.1UT01.001 CUSHION MOLDED PULP 1717
53 E286356 4G.1UT02.001 CUSHION MOLDED PULP T 1717

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 37 of 44

3.2. Packing drawing

US054952 - 2012-09-28T00:54:02Z

3.2.1 Packing Method:

3.2.2 Pallet Packing:

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 38 of 44

3.2.3 Pallet Loading Data

US054952 - 2012-09-28T00:54:02Z

Sea

Air

ET1517L:

Model Name ET1517L ET1717L

Outer carton 447*380*207 482*436*240

Pallet 1140*900*120 1310*970*120

layers 10 8

Per pallet 60 48

Container 20' 720 480

Loading rate 91% 95%

Container 40' 1,560 1008

Loading rate 97% 98%
Outer carton 447*380*207 482*436*240

Pallet 1140*900*120 1310*970*120

layers 6 5

Per pallet 36 30

Size(mm) Size(mm)

Quantity Quantity

Size(mm) Size(mm)

Quantity Quantity

ET1717L

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 39 of 44

3.3. Trouble Shooting Guide

A

US054952 - 2012-09-28T00:54:02Z

No. Issue Analysis Solution

Panel no display,
indicator OSD LED

1

not lighting.

Check user interface connection:

adapter AC plug to outlet, adapter DC plug

A

to monitor

B Check OSD Power button ON

Check internal connector connection:

a. LVDS cable, to panel / to AD board
b. Backlight cable, to panel / to AD board / to

*LED Driving board

c. Keypad cable, to Keypad board / to AD

C

D Check internal cables if there any broken Replace it, if cable broken.

E Check fuse(F1) on AD board Replace it, if F1 open.

F

board

d. *LED Driving board cable, to LED Driving

board / to AD board

(Note: “ *LED Driving board ” is for 17" CMI
panel model only)

Check panel power at C63 (15" model 3.3V,
17" model 5.0V)

Check scalar power at C73 (3.3V)

Re-plug in all the cables, or
change a cable

Press ON OSD Power
button

Re-plug in all the cables.

Replace related circuit
components

Panel no display,

2

indicator OSD LED
blinking.

Panel no display,

3

indicator OSD LED
lighting.

Panel displaying all
white, but no

4

image, indicator
OSD LED lighting.

Check user interface connection:

A

VGA cable to PC, VGA cable to monitor

Check internal Backlight cable connection:

a. Backlight cable, to panel / to

*LED Driving board

b.*LED Driving board cable, to LED Driving

A

B Check internal Backlight cable if any broken Replace it, if cable broken.

A Check internal LVDS cable connection Re-plug in all the cables.

B Check internal LVDS cable if any broken Replace it, if cable broken.

board / to AD board

(Note: “ *LED Driving board ” is for 17" CMI
panel model only)

D board / to

Re-plug in the cable, or
change a cable

Re-plug in all the cables.

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 40 of 44

No. Issue Analysis Solution

US054952 - 2012-09-28T00:54:02Z

Panel displaying,

5

indicator OSD LED
not lighting.

A Check internal Keypad cable connection Re-plug in all the cables.

B Check internal Keypad cable if any broken Replace it, if cable broken.

Panel displaying,

6

OSD button no

A Refer to No. 5

response.

7 Display abnormal A Refer to No. 4

A Check user interface USB connection

Re-plug in the cable, or
change a cable

Check internal Touch cable connection:

a. Touch cable to AD board / to Touch

Touch function no

8

response.

B

Controller board

b. Touch screen cable to Touch Controller

board

C Check Touch Power at C52

D Check Touch Driver on PC

Re-plug in all the cables.

Replace related circuit
components

Reinstall Touch Driver on
PC

Touch function

9

abnormal.

A Check Touch Driver on PC

Reinstall Touch Driver on
PC

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 41 of 44

3.4. Circuit Operation Theory

US054952 - 2012-09-28T00:54:02Z

3.4.1. Scalar RTD2270CLW Spec

One Analog input supported



Integrated 8-bit triple-channel 210MHz ADC



1 and 2 pixel/clock panel support and up to 210MHz



8 bits LVDS output interface



3.4.2 System Diagram

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 42 of 44

3.4.3. AD board Diagram (LCD Controller Board)

US054952 - 2012-09-28T00:54:02Z

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 43 of 44

3.4.4. Power structure

US054952 - 2012-09-28T00:54:02Z

3.4.5. LED Driver Board Diagram (For ET1717L Only)

Service Manual: ET1517L, ET1717L

ES600904 Rev B, Page 44 of 44