T
h
1
1
n
D
D
e
S
o
o
e
8
G
m
m
r
ouc
1519L
1919L
(Optio
mon
5.6” LC
8.5” LC
al Magn
itor U
Deskt
Deskt
tic Strip
W60101
ser
p Touch
p Touch
Reade
Rev E
uide
onitor
onitor
Availabl
e)
Copyright © 2014 ELO Touch Solutions.
All Rights
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or by any means,
including, but not limited to, el ectronic, magnetic, optical, chemical, manual, or otherwise
without prior written permission of ELO Touc h S olu tio ns.
Reserved.
Disclaimer
The information in this docum ent is subject to change without notice. ELO Touch Solutions
and its Affiliates makes no representations or warranties with respect to the contents herein,
and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. ELO Touch Solutions reserves the right to revise this publication and to
make changes from time to time in the content hereof without obligation of ELO Touch
Soluti ons to notify any person of such revisions or changes.
Trademark
AccuTouch, ELO (logo), ELO Touch Solutions, and IntelliTouch, are trademarks of the ELO Touch
Solutions. Windows is a trademark of the Microsoft group of companies. Other product names
mentioned herein may be trademarks or registered trademarks of their respective companies. ELO
T ouc h S olu tions claims no interest in trademarks other than its own.
Acknowledgments
Table of
Chapter 1
Introduction 5
Product Description ....................................................5
Precautions.................................................................5
Chapter 2
Installation and Setup 6
Unpacking Y our T ouchmonitor ....................................6
Assembling the stand plate ........................................8
Interface Connection .................................................9
Speakers and Audio ... ................................................9
MSR Interface connection (Optional) .........................10
Product Overview .......................................................11
Main Unit ..............................................................11
Rear View .............................................................11
Mounting the Display ..................................................12
Rear Mounting Using the VESA Interface ..................13
VESA Mounting Options.............................................13
Installing the Driver Software......................................14
Installing the Seria l Touch Driver (not applicable
to Acoustic Pulse Recognition and
Projected-Capacitive monitor) .............................15
Installing the Serial Touch Driver for Windows 7,
Windows Vista, Windows XP, Windows 2000,
Windows 98/95 and NT 4.0 .............................16
Installing the Serial Touch Driver for Windows 3.1
and MS-DOS .. ......................................................16
Installing the USB Touch Driver ............................17
Installing the USB Touch Driver for Windows 7,
Windows Vista, Windows XP, Windows 2000,
and Windows 98..............................................17
Installing APR USB Touch Driver for
Windows 7, Windows VISTA and
Windows XP ....................................................17
Chapter 3
Operation 18
About T ouchmonitor Adjustments ...............................18
Bottom Panel Controls..........................................19
Controls and Adjustment ............................................20
OSD Menu Functions . ... .......................................20
OSD Lock/Unlock . ................................................20
OSD Control Options............................................21
Preset Modes .......................................................22
Power Management System.................................23
Display Angle..............................................................23
IntelliTouch Plus Touch Technology ............................24
Projected-Capacitive T ouch Technology .....................25
Gesture Support .........................................................25
ME,
ME,
Contents
Chapter 4
Troubleshooting 26
Solutions to Common Problems .................................26
Appendix A
Native Resolution .......................................................27
Appendix B
Touchmonitor Safety ...................................................29
Care and Handling of Your Touchmonitor ...................30
Appendix C
Touchmonitor Specifications .......................................31
15.6" LCD Touchmonitor (ET1519L) Dimensions .......34
18.5" LCD Touchmonitor (ET1919L) Dimensions .......35
Regulatory Information
Warranty
39
36
R
C H APTE
1
Product Description
Your new 1519/1919L touchmonitor combines the reliable performance of touch technology
with the latest advances in LCD display design. This combination of features creates a natural
flow of information between a user and your touchmonitor.
This LCD monitor incorporates a 15.6” or 18.5” color active matrix thin-film-transistor (TFT)
liquid crystal display to provide high quality display performance. A maximum resolution of
WXGA 1366 x 768 is well-suited for displaying both graphics and images. Other features that
enhance the performance of this LCD touchmonitor are Plug & Play compatibility, OSD (On
Screen Display) controls, an optional magnetic strip reader (MSR), and Elo’s unique zero-bezel
Acoustic Pulse Recognition (APR) touchscreen. In addition, the 1519/1919L is easily
configurable
Precautions
Follow all warnings, precautions and maintenance procedure as recommended in this user’s
manual to maximize the life of the touch monitor. See Appendix B for more information on
touchmonitor safety .
for either portrait or landscape orientation.
NTRODUCTION
I
1-5
a
Tso
Y
C
i
u
m
Q
t
n
m
r
G
S
t
b
P
A
L
c
A
o
H
S
i
P
R
2
Unp
cking
his chapter d
ftware.
our To
heck that the
scusses how
chmo
following ite
N
I
o install the 1
itor
s are presen
TALL
519L/1919L
and in good
TION
CD touchm
ondition:
C
ND
nitor and the
APTE
ETUP
driver
2-6
LCD
CD and
onito
Elo
QuickStart
CD
Software
uick Install
uide
VGA ca
le
ower Brick
USB cable
(not incl
Aud
Serial Cable
uded with A
o cable
R model)
PPPPP
o
w
o
E
o
o
o
w
e
d
e
e
e
T
M
V
a
C
ower cable f
r North Am
rica models
USA/UL Po
er cable
ower cable f
r European
models
Europe/VD
power cable
UK pow
r cable
ower cable f
r Japan mo
els
Japanese/PS
E power cabl
Adapter/
erminal
ower cable f
r Asia mode
ls
and
and
or
China/CCC
power cable
Taiwan/BS
I power cabl
ower cable f
r Worldwid
models
or
e Korea/K
power cable
USA/UL Po
er cable
Europe/
DE power c
ble
2-7
e
a
a
a
a
Ass
2-8
mbling
the st
P
ushing the st
c
ptive screw.
nd plat
nd plate tow
e
rd the stand untill it is tight, then fasten the stand plate using
f
N
a
o
h
n
T
o
ThT
O
o
g
t
UPo
C
A
e
o
u
e
h
e
m
e
o
i
n
o
e
n
p
p
r
e
o
G
n
u
t
c
t
h
h
p
C
o
G
o
r
t
w
h
u
h
t
p
t
e
y
b
m
C
e
r
R
t
f
o
f
u
o
by
r
n
r
p
n
s
d
d
o
A
s
Cer
.
r
m
e
.
Inter
Spe
ace C
ote:
Befo
touc
kers a
nnecti
re connectin
monitor are
1 2
1
. Connect D
cable to the
2
. Connect on
cable (but n
Tighten by t
3
. Connect on
monitor . T ig
. Connect on
4
monitor.
. Facing the
5
corner of th
d Audi
he touchmon
t
the Audio I
o use headph
adphones ar
he volume a
n-Screen Dis
n
the cables to
urned off.
SB Cable
wer Brick
cable of the
C outlet.
end of eithe
t both) to th
rning the tw
end of the
ten by turni
end of the a
onitor, press
monitor.
2
Serial
V
tor includes
put port and
nes, plug in
connected, t
d muting of t
lay (OSD)
your touchm
3 4
Cable
ower brick t
the
rear side of
thumb scre
A cable
g the two th
dio cable to t
the power bu
wo built-in s
onnect the o
he headphon
e sound pla
e sound can
ontrol panel
V
touchsc
to t
nitor and P
Audio Cabl
Cable
the monito
een serial (
he computer
s clockwise
e rear side o
mb screws cl
e rear side o
ton located o
eakers. To u
her end to yo
s to the Audi
s through the
e adjusted
enu as desc
, be sure that
Headpho
and the othe
S232) cable
and the othe r
o ensure pro
computer a
ckwise to en
computer an
n the undersi
se the speake
r computer.
Output port
headphones
using the “
ibed on page
the computer
e Cable
end through
or the touch
end to the L
grounding
d the other to
ure proper g
the other to
e of the boto
rs, plug in th
shown above
nly.
udio” choice
3-21.
and
AC power
creen USB
D monitor.
the LCD
ounding.
the LCD
-right
audio cable
When
from the
2-9
Magnetic Stripe Reader (MSR) Interface Connection (optional)
If the MSR is installed on the monitor, plug the USB cable from the MSR directly to the PC.
No drivers are required to be loaded.
To change the MSR function mode from keyboard em ulation to HID, load the “MSR CHANGE
MODE.EXE” utility from the enclosed TouchTools CD or go online to www.elotouch.com to
download this utility .
Note: MSR function mode can be changed to HID mode from keyboard emulation mode an d back using
2-10
the “MSR CHANGE MODE.EXE” utility.
e
M
R
K
Tcu
o
g
s
w
c
n
a
1
Prod
uct Ov
rview
ain Unit
ear View
ensingto
he Kensingt
rity device,
TM
n Lock
TM
n
lock is a
o to http://w
ecurity devi
w.kensingto
e that preven
.com.
ts theft. To find out more
bout this se-
2-1
n
YPmst
m
h
e
a
y
n
r
fl
r
M
i
n
c
l
d
p
p
l
k
1
n
r
h
h
c
o
F
s
t
a
s
m
o
n
d
m
-
e
l
A
Mou
2-12
ting th
Not
e Displ
our medicall
hysical Mou
ounting inte
andards for
ounting inte
t
e pedestal.
ET1919L
ET1519LM
1
Screw locat
: You will
y
certified to u
ting Interfac
face for flat p
at panel disp
face is locate
Figure 2-1 :
on, M4 Philli
eed a Philli
hscreen disp
e (FPMPMI)
anel displays.
ay mounting
on the bac
VESA mounti
s, ×4
s screwdrive
ay conforms
standard. T
Y our display
devices, suc
of your tou
1
g interface l
to mount the
to the VESA
e FPMPMI
conforms to
as for walls
hscreen displ
cation, pede
display or re
lat Panel M
tandard defi
he correspon
and table ar
y and is pre
tal removed
ove the ped
nitor
es a physica
ing
s. The VES
connected to
1
1
stal.
V
A
i
n
T
m
G
w
E
w
n
w
M
w
n
y
h
e
w
m
g
1
p
f
f
c
V
o
f
i
c
w
a
u
r
s
m
n
p
2
A
g
g
m
A
e
o
o
l
t
p
h
F
e
L
n
o
o
u
n
3
Rear
ES
Mount
Mou
ng Usi
1
If the displa
pedestal to t
2
Reinstall th
positioned
3
Mount the
cables throu
ET15
ting
he following
8
7
ww.gcx.com
rgotron
8
6
51-681-7600
ww.ergotron.
I
8
6
10-253-9554
ww.innov-of
8
ww.mediare
O
onitor:
CX
0-228-2555
7-773-1100
0-888-8458
novative O
0-524-2744
RI
0-688-2414
g the
is already c
e display (re
four screws
ith the corre
onitor to the
h the cable
Fig
9LM
tions
companies p
com
fice Product
ice-prod.co
overy.com
ESA I
nnected to a
er to Figure
nto the VE S
t side up.
all accordin
ccess openin
1
re 2-2: Rear
ovide VES
terfac
edestal, rem
-1 , item 1 ).
interface m
to the temp
.
ount templa
mounting de
ve the four s
Separate the
unt. Ensure t
ate shown in
e (not to scal
ET1919
vices compat
crews that co
edestal from
at the monit
igure 2-2. R
)
M
ible with yo
nect the
the display .
r is
ute the
1
touchscree
2-1
Loading...