Elo Touch 1827L User Guide
Elo EntuitiveTouchmonitor
User Guide
For 18.1" LCD DesktopTouchmonitors
1825L/1827L Series
Revision C
Elo Entuitive Touchmonitor
User Guide
18.1" LCD Desktop Touchmo nito r
1825L/1827L Series
Revision C
P/N 008563
Elo TouchSystems, Inc.
1-800-ELOTOUCH
www.elotouch.com
Copyright © 2004 Elo TouchSystems Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means, includi ng, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written
permis sion of Elo TouchSystems.
Disclaimer
The information in this document is subject to change without notice. Elo TouchSystems makes no
representations or warranties with respect to the contents hereof, and specifically disclaims any
implied warranties of merc hantabilit y or fitness for a particular purpose . Elo TouchSystems reserves
the right to revise this publication and t o make changes from time to time in the content hereof
without obliga t ion of Elo TouchSystems to notify any pe r son of such revis i o ns or changes .
Trademark Acknowledgments
IntelliTouch, iTouch, SecureTouch, AccuTouch, Entuitive, and MonitorMouse are trademarks of Elo
TouchSystems Inc.
Other product names mentioned herein may be trademarks or registered trademarks of their
respective companies. Elo TouchSystems claims no interest in trademarks other than its own.
iii
Table of Contents
Chapter 1
Introduction 1
Precautions . . . . . . . . . . . . . . . . . . . . 1
About the Product . . . . . . . . . . . . . . . . . 1
Chapter 2
Installation and Setup 3
Unpacking Your Touchmonitor. . . . . . . . . . . 3
Product Overview . . . . . . . . . . . . . . . . . 4
Main Unit . . . . . . . . . . . . . . . . . . . . 4
Rear View . . . . . . . . . . . . . . . . . . . 4
Side View. . . . . . . . . . . . . . . . . . . . 5
Base Bottom View . . . . . . . . . . . . . . . 5
Touch Interface Connection . . . . . . . . . . . . 6
Serial or USB Connection . . . . . . . . . . . 6
STEP 1-Routing the Cables . . . . . . . . . 7
STEP 2-Connecting the Vid eo Ca ble . . . . 8
STEP 3-Connecting the Serial or USB
Touchscreen Cable . . . . . . . . . . . . . 9
STEP 4-Connecting the SpeakerCabl e . 10
STEP 5-Connecti ng the Power Cable. . . 11
Optimizing the LCD Display . . . . . . . . . . . 12
VESA Mount on YourTouchmonitor. . . . . . . 12
Accessing the VESA Mounting Interface. . . 13
Mounting the Base . . . . . . . . . . . . . . . 13
Installing the Driver Software . . . . . . . . . . 14
Installing the Serial Touch Driver. . . . . . . 15
Installin g the Serial T o uch Driver for Windo ws
XP, 2000, Me, 95/98 and NT 4.0 . . . . . 15
Installin g the Seri al Touch Driv er f or MS-DOS
and Win d ow s 3.1 . . . . . . . . . . . . . 16
Installi ng the USB Tou ch Driver . . . . . . . 17
Installing the USB Touch Driver for Windows
XP, 2000, Me and 98 . . . . . . . . . . . 17
Chapter 3
Operation 19
About Touchm onitor Adjustments. . . . . . . . 19
Using the On-Screen Display (OSD) Menus . . 19
Side Bezel Buttons . . . . . . . . . . . . . . . 20
OSD Menu Function . . . . . . . . . . . . . . 21
Auto Adjustment . . . . . . . . . . . . . . . . 22
Chapter 4
Troubleshooting 23
Solutions to Common Problems . . . . . . . . 23
Appendix A
Native Resolution 25
Appendix B
Touchmonitor Safety 27
Care and Handling of Your T ouchmonitor. . . . 28
Appendix C
T echnical Specifications 29
Compatible Vi deoModes . . . . . . . . . . . . 29
Touchmonitor Specifications . . . . . . . . . . 30
18.1" LCD Touchmonitor (ET182XL-XXWC-X)
Dimensions . . . . . . . . . . . . . . . . . . 34
Regulatory Information 37
Warranty 41
Index
43
iv
Congratulati ons on your purchase of an Elo TouchSystems Entuitive
touchmonitor. Your new touchmonitor combines the reliable perf ormance of
Elo’s touch technolo gy with the latest advances in LCD display design. This
combination of featur es creates a natural flow of information between a user
and your touchmonitor.
Precautions
C HAPTER
1
C
HAPTER
1
I
NTRODUCTION
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit. See Appendix B for more
information on touchmon itor safety.
Abou t the Pr oduct
Your LCD Desktop Touchmonitor is a 18.1” SXGA TFT color display with the
following feature s:
• Direct analog RGB or Digital RGB input
•18.1” diagonal screen size
• 16.7 million colors, 8 bit per color data
•1280 x 1024 resolution
• SXGA/XGA/SVGA/VGA/VESA/Mac c ompatible
•30kHz~80kHz horizontal scan
• 56~75Hz refresh rate
1-1
• Auto adjustment capability
• High quality full screen re-scaling
• Multilingual OSD menus in five languages: English, French, Deutsch
Spanish and Japanese
• Serial or USB touc h inte rfac e (U SB req u ires Windows 98, 2000, Me and
XP.)
• Built in speakers with volume, treble, bass and balance control through OSD
• Patented touch technology of Elo TouchSystems
• Power saving mode
o
• Stand with minimum 95
angle of tilt.
• Cable management device
• VESA flat panel monitor physical mounting interface (Both of 75 & 100mm)
• OSD and Power button lockouts
• Wall mountable with existing stand
• M5 threaded holes on bottom of stand for securing to desk or other surface,
i.e. table top
•
Cable strain reliefs for all cables
For full Product Specifications refer to Appendix C.
1-2 Elo Entuitive Touchmonitor User Guide
C
HAPTER
2
I
NSTALLATION AND
This chapter discusse s how to install your LCD touchmonitor and how to insta ll
Elo TouchSystems driver software.
Unpac king Yo ur Touc hmon itor
Check that the following 10 items are present and in good condition:
C HAPTER
2
S
ETUP
Serial touchscreen cable
LCD Display
Quick Install Guide
CD
Software
User Guide-on CD,
Quick Install Guide and software CD
OR
USB Cable
Speaker cable Video cable
Monitor power cable
(US/Canada)
European monitor
power cable
DVI-D video cable
Adapter
2-3
Prod uct Overvie w
Main Unit
Rear View
LCD Display
Stand
2-4 Elo Entuitive Touchmonitor User Guide
Side View
User Controls
Base Bottom View
4X thread
M5x0.8
Key hole for M5 screw
2-5
Touch Interface Connection
Your touchmonitor comes with one of the following touchscreen connector
cables: Serial (RS-232) cable or USB cable. (For Windows 98, 2000, Me and
XP systems only.)
To set up this display, please refer to the following figures and procedures:
Serial or USB Connection
The following illustrations guide you step by step in connecting your
touchmonitor using a serial or USB cable connection
CAU TION
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and the tou
chmonitor are turned off.
Serial touchscreen
cable
POWER SPEAKER
PORT
FEMALE 15-PIN
VIDEO CONNECTOR
CONNECTIONS ON UNDERSIDE
FEMALE DVI-D
VIDEO CONNECTOR
FEMALE 9-PIN SERIAL
TOUCHSCREEN CONNECTOR
USB CONNECTOR
Video cable
USB Cable
Speaker cable
Monitor
power cable
(US/Canada)
European monitor
power cable
DVI-D video cable
Adapter
2-6 Elo Entuitive Touchmonitor User Guide
STEP 1-Routing the Cables
• Feed the cables through the cable port holes. Do not remove the rear cover.
2-7
FEMALE 15-PIN
VIDEO CONNECTOR
STEP 2-Connecting the Video Cable
CONNECTIONS ON UNDERSIDE
VIDEO PORT
VIDEO CABLE
• Tilt the screen up and back to access the connection ports.
• Connect the 15-pin video cable
to the video port on
your PC.
(the ferrite bead end)
• Connect the other end of the video cable to the video connector on your
touchmonitor by routing the cable through the hole in the stand.
or 24-pin DVI-D cable
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector clockwise.
2-8 Elo Entuitive Touchmonitor User Guide
STEP 3-Connecting the Serial or USB Touchscreen Cable
CONNECTORS ON THE UNDERSIDE
TOUCHSCREEN CONNECTOR
USB TOUCHSCREEN
FEMALE 9-PIN SERIAL
CONNECTOR
SERIAL TOUCHSCREEN CABLE
• Connect the female end of the serial (RS-232) cable to the serial port on your
PC, or connect the USB touchscreen cable to the USB touchscreen connector
on the back of your touchmonitor.
• Connect the male end of the cable to the serial touchscreen connector on your
touchmonitor, or connect the other end of the USB touchscreen cable to your
PC.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector.
2-9
SPEAKER
PORT
N
STEP 4-Connecting the Speaker Cable
CONNECTIONS ON UNDERSIDE
OTE
:
If you do not wish to connect the speaker cable, go to step 5.
Connect the light blue end of the speaker cable to the light blue speaker
•
port of the monitor (audio in).
Connect the lime (light green) end of the speaker cable to the lime speaker
•
port on the computer (audio out).
SPEAKER CABLE
2-10 Elo Entuitive Touchmonitor User Guide
POWER
STEP 5-Connecting the P o wer Cable
CONNECTIONS ON UNDERSIDE
N
POWER CABLE
Depending on where you live, you will use either the European or US/Canadian
power cable.
• Connect the female end of the power cable to the
Connect the Brick power cable into the power port on the touchmonitor.
•
Route the cable through the cable management channel.
•
OTE
:
To p
rotect your equipment against risk of damage from electrical surges in the power
line, plug the touchmonitor’s power cord into a surge protector, and then connect the
surge protector to a grounded AC electrical outlet.
Brick power supply.
BRICK POWER SUPPLY
2-11
Loading...