Elo Touch 17A2 Quick Installation Guide for Hard Drive 80GB

17A2

●

Note: Always handle the component by its edges.

●

Installer must be electrically grounded while performing installation steps.

Installing the Hard Drive for the 17A2/15A2

Revision B
P/N E992647

North America

Elo TouchSystems

2008 Tyco Electronics.

301 Constitution Drive,
Menlo Park, CA 94025
www.elotouch.com

For current Elo news, product updates and announcements, register to receive our TouchMonitor newsletter
at www.elotouch.com/go/news

Elo Technical Support

Online self-help

:

www.elotouch.com/go/websupport

Technical Support contacts in your region:

www.elotouch.com/go/contactsupport

Europe

Tel [phone]
Fax [phone]
[e-mail]

Asia-Pacific

Tel [phone]
Fax [phone]
www.tps.co.jp

Latin America

Tel [phone]
Fax [phone]
www.elotouch.com.ar

1

Turn off power to the touchcomputer
and unplug the power adapter from
the unit.

15A2

1

Turn off power to the touchcomputer
and unplug the power adapter from
the unit.

2

Carefully place the touchcomputer
facedown on a soft, flat surface.
Turn touchcomputer upside down
and take off the back cover insert.

2

Carefully place the touchcomputer
facedown on a soft, flat surface.
Turn touchcomputer upside down
and take off the back cover insert.

3

Remove the 2 screws attaching the
DVD drive flap and remove the flap.
If you have an existing hard drive,
remove the security screw and pull on
the metal handle to remove it.

3

Remove the 6 screws as shown above
and remove the shielding. If you have
an existing hard drive, grasp the handle
of the caddy and detach the hard drive
from the connector to remove the hard
drive from the touchcomputer.

4

Remove the hard drive caddy from
the old hard drive and mount it
onto the new hard drive.

4

Remove the hard drive caddy from
the old hard drive and mount it
onto the new hard drive.

5

Grasp the handle of the hard drive
and push the hard drive into the slot
with the manufacturer’s label facing
up. Push the hard drive into the slot
until it locks into the connector.

(B )

(A )

5

Grasp the handle of the caddy
with the new hard drive and slide
the hard drive into the hard drive
space. Then push the hard drive
up until it snap locks into the
connector.

6

Secure the hard drive using the
security screw provided.

6

Replace the shielding and 6 screws
removed in Step 3.

7

Close the flap and replace the two
screws removed in Step 3.

7

Replace the back cover insert. The hard drive will be delivered

8

Replace the back cover insert. The hard drive will be delivered

8

preformatted. To recover the
factory operating system, place
the appropriate Elo Touchsystems
recovery CD or DVD into the DVD
drive (or USB DVD drive) before
turning on the touchcomputer.

9

preformatted. To recover the
factory operating system, place
the appropriate Elo Touchsystems
recovery CD or DVD into the internal
DVD drive (or USB DVD drive) before
turning on the touchcomputer.

9

Reconnect the power adapter and
power on the touchcomputer.
Follow the on-screen instructions to
complete recovery.

10

Reconnect the power adapter and
power on the touchcomputer.
Follow the on-screen instructions to
complete recovery.

821107900902