No part of this publication may be reproduced, transmitted, transcribed, stored in a ret rieval system,
or tr ans lated into any language or computer language, in any form or by any means, including, b ut not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written
permission of El o TouchSyste m s .
Disclaimer
The info rmation in thi s document is subject to change without notice. Elo TouchSystems makes no
representations or warranties with respect to the contents hereof, and specifically disclaims any
implied warranti es of merchanta bility o r fitness for a particula r purpose. El o TouchSystems reserves
the right to revise this publication and to make changes from time to time in the content hereof
with ou t ob ligation of El o TouchSystem s t o no t i f y an y perso n of s uc h r ev i s ions or chang es.
Trademark Acknowledgments
IntelliTouch, iTouch, SecureTouch, AccuTouch, Entuitive, and MonitorMouse are trademarks of Elo
TouchSystems Inc.
Other product names mentioned herein may be trademarks or registered trademarks of their
respective companies. Elo TouchSystems claims no int erest in trademar ks other than its own.
Congratulations on your purchase of an Elo TouchSyst ems Entuitive
touchmonitor . Your new touchmonitor combines the reliable performance of
Elo’s touch technology with the latest advances in LCD display design. This
combination of features creates a natural flow of information between a user
and your touchmonitor .
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximi ze the life of your unit. See Appendix B for more
information on touc hmonitor safety.
Abou t the Pr od uct
Your LCD Desktop Touchmonitor is a 17.0” SXGA TFT color display with the
following featur es:
• Direct analog RGB or Digital RGB input
• 17.0” diagonal screen size
• 16.7 million displayable colors
• 1280 x 1024 resolution
• SXGA/XGA/SVGA/VGA/VESA/Mac compatible
• 30kHz~80kHz horiz o ntal scan
• 56~75Hz refresh rate
1-1
• Auto adjustment capability
• High quality full sc reen re-scaling
• Multilingua l OSD menus in six languages: English, French, German,
Spanish, Italian and Japanese
• Serial or US B tou c h interface (USB requ ir es Windows 98, 2000, Me and
XP.)
• Built in speakers with volume, treble, bass and balance control through OSD
• Patented touch technology of Elo TouchSystems
• VESA DDC 1/2B data communication
• VESA DPMS power saving
• Stand with minimum 95° angle of tilt.
• Cable management device
• VESA flat panel monitor physical mou nting interface (Both of 75 & 100mm)
• OSD and Power button lockouts
• Wall mountable with existing stand
• M5 threaded holes on bottom of stand for securing to desk or other surface,
i.e. table top
• Cable stain reliefs for all cables
For full Product Specifications refer to Appendix C.
1-2Elo Entuitive Touchmonitor User Guide
C
HAPTER
2
I
NSTALLATION AND
This chapter disc usses how to install your LCD touchmonito r and how to install
Elo TouchSyste ms driver software.
Unpac king Your Touc hmon itor
C HAPTER
2
S
ETUP
Check that the following 10 ite ms are present and in good condition:
OR
Serial touchscreen cable
LCD Display
Quick Install Guide
CD
Software
User Guide-on CD,
Quick Install Guide and software CD
Speaker cableVideo cable
Monitor power cable
(US/Canada)
European monitor
power cable
USB Cable
DVI-D video cable
Adapter
2-3
Pr oduct O vervie w
Main Unit
LCD Display
Stand
Rear View
2-4Elo Entuitive Touchmonitor User Guide
Side View
User Controls
Base Bottom View
4X thread
M5x0.8
Key hole for M5 screw
2-5
Touch Interface Connection
Yo ur touchmonitor comes with one of the following touchscreen connector
cables: Serial (RS-232) cable or USB cable. (For Windows 98, 2000, Me and
XP systems only.)
To set up this display, please refer to the following figures and procedures:
Serial or USB Connection
The following illustrations guide you step by step in connecting your
touchmonitor using a serial or USB cable connection
CAUTION
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and the touchmonitor are turned off.
Serial touchscreen
cable
POWER
SPEAKER
PORT
FEMALE DVI-D
VIDEO CONNECTOR
CONNECTIONS ON UNDERSIDE
FEMALE 15-PIN
VIDEO CONNECTOR
TOUCHSCREEN CONNECTOR
FEMALE 9-PIN SERIAL
Video cable
USB Cable
USB CONNECTOR
Speaker cable
Monitor
power cable
(US/Canada)
European monitor
power cable
2-6Elo Entuitive Touchmonitor User Guide
DVI-D video cable
Adapter
STEP 1-Routing the Cables
• Feed the cables through the cable port holes. Do not remove the rear cover.
2-7
STEP 2-Connecting the Video Cable
CONNECTIONS ON UNDERSIDE
FEMALE 15-PIN
VIDEO CONNECTOR
VIDEO CABLE
• Tilt the screen up and back to access the connection ports.
VIDEO PORT
• Connect the 15-pin video cable
to the video port on
your PC.
(the ferrite bead end)
or 24-pin DVI-D cable
• Connect the other end of the video cable to the video connector on your
touchmonitor by routing the cable through the hole in the stand.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector clockwise.
2-8Elo Entuitive Touchmonitor User Guide
STEP 3-Connecting the Serial or USB Touchscreen Cable
CONNECTORS ON THE UNDERSIDE
TOUCHSCREEN CONNECTOR
FEMALE 9-PIN SERIAL
USBTOUCHSCREEN
CONNECTOR
SERIAL TOUCHSCREEN CABLE
• Connect the female end of the serial (RS-232) cable to the serial port on your
PC, or connect the USB touchscreen cable to the USB touchscreen connector
on the back of your touchmonitor.
• Connect the male end of the cable to the serial touchscreen connector on your
touchmonitor, or connect the other end of the USB touchscreen cable to your
PC.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector.
2-9
Loading...
+ 36 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.