Elo E193599 User Manual

B-Series Touchcomputer User Guide

B-Series LCD Multi-function Touchcomputer

[15” and 17” model shown]

Tyco Electronics

B-Series Touchcomputer User Guide

Multi-function Touchcomputer

Revision B

P/N E610125

Tyco Electronics

1-800-ELOTOUCH (1-800-356-8682)

www.elotouch.com

B-SERIES TOUCHCOMPUTER USER GUIDE iii

Copyright © 2010 Tyco Electronics. All Rights Reserved.

No part of this publication may be reproduced, transmitted, transcribed, stored in

a retrieval system, or translated into any language or computer language, in any

form or by any means, including, but not limited to, electronic, magnetic, optical,

chemical, manual, or otherwise without prior written permission of Tyco

Electronics Elo TouchSystems.

Disclaimer

The information in this document is subject to change without notice. Tyco

Electronics Elo TouchSystems makes no representations or warranties with

respect to the contents hereof, and specifically disclaims any implied warranties of

merchantability or fitness for a particular purpose. References in this publication

to Tyco Electronics Elo TouchSystems products or services do not imply that

Tyco Electronics Elo TouchSystems intends to make them available in all

countries in which Tyco Electronics Elo TouchSystems operates. Tyco Electronics

Elo TouchSystems reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of Tyco

Electronics Elo TouchSystems to notify any person of such revisions or changes.

Trademark Acknowledgments

Elo TouchSystems, IntelliTouch, AccuTouch, TE (logo), Tyco Electronics,

Microsoft and Windows are trademarks. Other product names mentioned herein

may be trademarks or registered trademarks of their respective companies. Tyco

Electronics claims no interest in trademarks other than its own.

B-SERIES TOUCHCOMPUTER USER GUIDE iv

Table of Contents

Chapter 1: ................................................................................................. S

etup 1

Unpacking Your Touchcomputer .................................................................................................... 1

Adjusting the Display ...................................................................................................................... 2

Setting Up the Operating System .................................................................................................... 2

Calibrating the Touchscreen ............................................................................................................ 5

Securing the Base ........................................................................................................................... 7

Chapter 2: ................................................................................................. O

peration 8

On-Screen Display (OSD) ............................................................................................................... 9

LED Functionality ........................................................................................................................ 11

Using the Input/Output Panel ........................................................................................................ 12

Chapter 3: ................................................................................................. O

ptions and Upgrades ............................................................................... 13

Adding Optional Peripherals ......................................................................................................... 13

Magnetic Stripe Reader (MSR) ..................................................................................................... 14

Customer Display .......................................................................................................................... 16

Fingerprint Reader (FPR) .............................................................................................................. 17

PoweredUSB + Cash Drawer Port Card ...................................................................................... 19

Second VGA Port Card ................................................................................................................ 19

Wireless Card ................................................................................................................................ 19

Second Hard Disk Drive .............................................................................................................. 20

Solid State Drive .......................................................................................................................... 20

Modem Card ................................................................................................................................. 20

Parallel Port Card ......................................................................................................................... 21

RAID Controller Card .................................................................................................................. 21

Elo POS Demo Software ............................................................................................................... 21

Chapter 4: ................................................................................................. S

afety and Maintenance ............................................................................. 22

Safety ............................................................................................................................................. 22

Care and Handling ......................................................................................................................... 23

B-SERIES TOUCHCOMPUTER USER GUIDE v

Recovering the Operating System ................................................................................................. 24

Chapter 5: ................................................................................................. T

echnical Specifications ........................................................................... 25

Touchcomputer Specifications ...................................................................................................... 25

Display Screen Specifications (15”) ............................................................................................. 28

Display Screen Specifications (17”) ............................................................................................. 29

Environmental Specifications ....................................................................................................... 30

Chapter 6: ................................................................................................. T

echnical Support ...................................................................................... 31

Technical Assistance ..................................................................................................................... 31

Regulatory Information ............................................................................ 32

Warranty .................................................................................................... 35

Index ......................................................................................................... 37

B-SERIES TOUCHCOMPUTER USER GUIDE 1

C H A P T E R

1

SETUP

This chapter discusses how to set up and test your touchcomputer. For

information on peripheral options, refer to Chapter 3, “Options and Upgrades.”

Unpacking Your Touchcomputer

Check that the following items are present and in good condition:

Touchcomputer

Power cable US/Canada

Power Adapter

Mounting Brackets

Optional

security screw

Power cable Europe

Recovery DVD and

Quick Install Guide

Power Adapter

B-SERIES TOUCHCOMPUTER USER GUIDE 2

Adjusting the Display

The display screen can be adjusted from 0 to 70 degrees, as shown below.

CAUTION: To prevent tipping or dropping, be sure to hold the base when

adjusting the display.

Setting Up the Operating System

If configured with an operating system, the initial setup of the operating system

takes approximately 5-10 minutes. Additional time may be needed depending on

touchcomputer hardware configurations and connected devices.

To set up the Microsoft® Windows® Operating System for the touchcomputer,

turn on the touchcomputer by pressing the power button, and then follow the

instructions on the screen.

Selecting the Language

Microsoft Windows® uses English as the default language in menus and dialog

boxes. You can change this language to suit your preferences at the screen

below.

Note: If you choose to change the language after initial setup, you can follow

steps 1-2 to arrive at the same screen below:

1. From the desktop, click Start > Settings > Control Panel (in Windows XP) or

Start > Control Panel (in Vista).

0°

70°

B-SERIES TOUCHCOMPUTER USER GUIDE 3

2. In the Control Panel screen, select Regional and Language Options.

3. Click Customize. The Regional and Language Options window appears.

Select the Languages tab.

4. If required, check the boxes for “Install files for complex script and right-to-left

languages” and “Install files for East Asian languages.”

5. Select the Regional Options tab.

6. Select your preferred language from the drop-down list in the Standards and

formats pane.

B-SERIES TOUCHCOMPUTER USER GUIDE 4

7. Click Apply.

8. Select your location from the drop-down list in the Locations pane.

9. Click OK.

B-SERIES TOUCHCOMPUTER USER GUIDE 5

Selecting the Time Zone

When the following window appears, you can change the time zone, date, and

time of the touchcomputer.

After making any changes, click Next to finish. Windows Setup completes the

installation of the touchcomputer.

Calibrating the Touchscreen

The touchscreen is pre-calibrated for accurate touch response.

If for any reason the touchscreen needs to be recalibrated, right-click the Elo icon

in the Task bar and then click “Properties.” The following window opens.

NOTE: Calibration is not applicable on APR touchscreen models.

B-SERIES TOUCHCOMPUTER USER GUIDE 6

Click the Align button. This launches the calibration program. The window shown

below opens. Follow the instructions to calibrate the touchscreen.

B-SERIES TOUCHCOMPUTER USER GUIDE 7

Securing the Base

When mounting the B-Series touchcomputer, the baseplate must be removed and

mounted on a flat surface. Use the four pre-tapped holes to secure the baseplate

from below the mounting surface before reattaching the touchcomputer as shown

below. The holes are designed to work with ISO metric M6 screws. Mounting

screws are not included with the product. Refer to the figure below for the location

of the holes. All dimensions are in millimeters.

Mounting Diagram

1)

2)

B-SERIES TOUCHCOMPUTER USER GUIDE 8

C H A P T E R

2

OPERATION

This chapter describes how to control the On-Screen Display (OSD), power

buttons, and I/O panel.

All adjustments made to the OSD and power controls are automatically saved.

User settings remain unchanged after powering off/on or in the case of a power

failure.