Elo E077464 User Manual

USER MANUAL
Elo Touch Solutions
1517L and 1717L Touchmonitors
SW601708 Rev E
Copyright © 2015 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Disclaimer The information in this document is subject to change without notice. Elo Touch Solutions, Inc.
and its Affiliates (collectively "Elo") makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems,
IntelliTouch, iTouch, SecureTouch, TouchTools and VuPoint are trademarks of Elo and its Affiliates. Windows is a trademark of Microsoft Corporation.
User Manual: 1517L, 1717L
Table of Contents
Chapter 1: Introduction ............................................................................ 4
Chapter 2: Installation .............................................................................. 5
Chapter 3: Mounting ................................................................................. 7
Chapter 4: Operation .............................................................................. 12
Chapter 5: Technical Support ................................................................ 16
Chapter 6: Safety & Maintenance .......................................................... 18
Chapter 7: Regulatory Information ........................................................ 20
Chapter 8: Warranty Information ........................................................... 24
User Manual: 1517L, 1717L
Chapter 1: Introduction
Product Description
Your new touchmonitor combines the reliable performance of Elo Touch Solutions touch products with the latest developments in touch technology and display design. This combination of features creates a natural flow of information between the user and the touchmonitor.
This touchmonitor incorporates a 16.2M color, active matrix thin-film-transistor LCD panel to provide high quality display performance. Its LED backlight significantly reduces power consumption and eliminates mercury (compared to CCFL-backlit panels). Other features that enhance this LCD monitor’s performance are Plug & Play compatibility, on-screen display (OSD) controls, and an optional magnetic stripe reader (MSR).
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your unit, to ensure user safety, and to prevent risks. See the Safety & Maintenance chapter for more information.
This manual contains information that is important for the proper setup and maintenance of the unit. Before setting up and powering on your new touchmonitor, read through this manual, especially the Installation, Mounting, and Operation chapters.
User Manual: 1517L, 1717L
Chapter 2: Installation
Unpacking the Touchmonitor
Open the carton and verify that the following items are present:
Touchmonitor with protective sheet over touchscreen
User Manuals CD
Japanese language regulatory information pamphlet
Quick Install Guide
VGA cable
USB cable
North American power cable
European power cable
User Manual: 1517L, 1717L
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the VGA video cables between the monitor’s VGA input connectors and your VGA video source, respectively. Tighten the video cable’s screws for best performance.
2. Connect the USB/serial touch cable between the monitor’s USB/serial connector and your PC’s USB/serial port.
3. Select the correct power cable for your region. Connect the power cable between the AC power source and the monitor’s AC input power jack.
4. Alternatively, if you have purchased an optional power adapter and elected to use it, connect the cable between the AC power source and the optional power adapter’s input connector. Connect the power adapter’s DC output connector to the monitor’s DC input power jack.
5. The touchmonitor ships in an OFF state. Press the power button to turn it on.
User Manual: 1517L, 1717L
Installing the Touch Technology Software Drivers
Some software installation is required for your touchmonitor to work with your computer. No additional drivers are required for your projected-capacitive touchmonitor, it uses Windows HID drivers.
To download latest touch drivers
1. Visit www.elotouch.com/Support/Downloads/Driver/DriverDownload/Default.aspx
2. Select the operating system from “Operating System” dropdown menu.
3. Select the technology from “Technologies” dropdown menu.
4. Click on the driver version required for your touchmonitor.
5. Click “Accept” once you are directed to the “Driver License Agreement” page.
6. Enter you email address, Click on “Next Step”. Your driver download will start automatically.
7. If you are a new user, fill in the required information and Click on “Register”. Your driver download will start automatically.
User Manual: 1517L, 1717L
Chapter 3: Mounting
Rear VESA Mount
For the 15 inch touchmonitor, a four-hole 75x75mm mounting pattern for M4 screws is provided on the rear of the monitor. Remove the stand using a Phillips screwdriver to access this mounting interface. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C.
An optional filler plate is available for purchase separately to use with the VESA mount: E000404 (Black) E000420 (White)
User Manual: 1517L, 1717L
Loading...
+ 17 hidden pages