elo 0700L User guide

Included Items

1 - USB cable with additional power connection

4 - screws, M4x8mm

TE Touch Solutions Technical Support

Online self-help:

www.elotouch.com/go/websupport

Technical Support contacts in your region:

www.elotouch.com/go/contactsupport

North America

TE Touch Solutions
301 Constitution Drive
Menlo Park, CA 94025
www.elotouch.com

Europe

Tel [phone]
Fax [phone]
[e-mail]

Asia-Pacic

Tel [phone]
Fax [phone]
www.tps.co.jp

Latin America

Tel [phone]
Fax [phone]
www.elotouch.com.ar

Quick Installation Guide

Elo TouchSystems 0700L

Touch and Non-Touch Monitors

DISCLAIMER:
Tyco Electronics Corporation and its Affiliates in the TE Touch Solutions business unit of the TE Connectivity Ltd. family of companies
(collectively “TE”) reserves the right to change or update, without notice, any information contained herein; to change, without notice, the
design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution of any
products.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise
without prior written permission of Tyco Electronics Corporation.

Elo (logo), Elo TouchSystems, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks of the TE Connectivity Ltd. family of
companies.

Copyright 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All rights reserved. [04/21/2011].

Revision B
P/N E979930

www.elotouch.com

Installation

Please go to www.elotouch.com\support to verify you have the latest drivers before

installing this device. Turn off your computer before installation.

Remove the cable cover by

1 5

1 5

pressing down on the latch and
sliding outward.

Install USB cable and route

2 6

2

cable through the bottom of the
opening as shown.

Reinstall the cable cover.

3443

6

Plug the other end of the cable
labeled “DATA cable” to a USB
port on the computer.

NOTE: Some computers may
require additional power by
plugging the “Aux Power Cable”
connector into an additional USB
port.

Install the DisplayLink and touch
drivers on your computer.

Note: This monitor can not
function as primary display
during boot-up. An additional
display must be used to install
the DisplayLink driver on the
computer.

DATA Cable

AUX Power
Cable

(Optional) The monitor can
be attached to any standard
75mmx75mm VESA mounting
bracket using the 4 - M4x8mm
mounting screws included with
the monitor.