ELMO WUSBMDL User Guide
User's Guide
Student Response System
CRV-CK-1
Read this User's Guide carefully before using the CRA-1 and
CRV-CK-1.
Store this User's Guide in a safe place in case you need it again.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings,
Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories
specified by the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or sold
with the apparatus.
When a cart is used,
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lighting
storms or when unused for long periods
of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
This marking is located at the bottom of
product.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
2
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will
expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications made to this equipment not expressly approved by (manufacturer name)
may void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact
during normal operation is minimized.
3
Contents
Before Use ...........................................................................................................................5
Main Functions ..................................................................................................................6
Supplied Items...................................................................................................................7
Part Names .......................................................................................................................9
Preparations ....................................................................................................................10
Inserting and Charging the Battery Pack.......................................................................10
Inserting the Battery into the Pen .................................................................................. 12
Installing the Tablet and SRS Software (Image Mate Accent) .......................................13
Basic Tablet Operations...................................................................................................15
Basic Pen Operations ...................................................................................................15
Basic Screen Configuration...........................................................................................16
Connections.......................................................................................................................17
Using in a Lesson..............................................................................................................18
SRS Mode ....................................................................................................................19
Operation ......................................................................................................................19
Tablet functions .............................................................................................................23
Clicker functions............................................................................................................24
Various Settings ................................................................................................................25
Setting Mode ...................................................................................................................26
Tablet Status Display.....................................................................................................27
Setting the Pen..............................................................................................................28
Other Functions.................................................................................................................29
Replacing the Pen Tip .....................................................................................................29
Storing the Wireless Adapter and Pen.............................................................................29
About the LEDs of Tablet.................................................................................................30
Setting the Pen Writing Style ...........................................................................................31
Wireless Communication Settings for the Tablet .............................................................34
Troubleshooting ................................................................................................................35
Product Specifications .....................................................................................................38
Product Specifications.....................................................................................................38
System Requirements .....................................................................................................40
About the Separately Sold Accessories...........................................................................41
Usage Precautions ..........................................................................................................41
Disclaimer........................................................................................................................43
About Trademarks ...........................................................................................................43
About the Warranty..........................................................................................................44
4
Before Use
Thank you very much for purchasing this product.
Please read this manual carefully to make suitable use of the SRS. Also, please
be sure to refer to any supplemental information included with this product.
Caution
Please note that screens and figures used in this manual may differ from the actual
views.
5
Main Functions
This product (SRS･･･Student Response System) is an educational tool that makes lessons
using ELMO's tablet and clickers more enjoyable and easier to understand.
The SRS has several key features for teaching more effective lessons.
■ Know an understanding level of the class
Students respond to questions and quizzes using their clicker with the results automatically
tallied, summarized and visually displayed in a pie chart or bar graph
6
Supplied Items
The package of this product contains the following items. Contact your dealer if any of the
following items are not included in the package you purchased.
Tablet
Battery pack
for the tablet
(Lithium-ion battery)
(For the tablet)
Wireless
adapter
Pen
CRV-CK-1
Dry cell AAA
battery
(For the pen)
AAA battery
Tweezers for
replacing a core
(For the pen)
Extra core ×3
(For the pen)
Screw driver
(For clicker’s rear cover)
7
Carrying case
RGB / USB composite cable
(For connecting Document Camera
to computer)
Application software
(CD-ROM)
Before use
Seal clicker no.
USB cable
for charging
Quick start guide
8
Part Names
Tablet
Tablet underside
Pen
Operating area
Wireless adapter
Eraser button
Power button
Turn the Tablet ON or OFF.
Press the button for 3 seconds or
more to turn OFF.
When the power is ON, it is lit blue.
When the battery level is low, it
flashes.
USB connector
Connect to your computer when charging
the Tablet.
<See “Inserting and Charging the Battery Pack”>
Status LED
Indicate the status of wireless and
battery level.
<See “About the LEDs”>
Function keys
Select the Tablet operations. See the
corresponding sections for more details.
Pen slot
Store the pen.
Wireless adapter storage slot
Store the wireless adapter.
<See “Storing the Wireless Adapter and Pen”>
Battery box
Install the supplied battery pack.
<See “Inserting and Charging the Battery Pack”>
Caution
Wireless settings button
Used when setting communication
with the wireless adapter.
<See “Wireless Communication
Settings for the Tablet”>
Wireless settings button (LED)
Used when setting communication
with the tablet.
<See “Wireless Communication
Settings for the Tablet”>
Only open when necessary.
9
CRV-CK-1
Preparations
Power button
Turn the ClickerON or OFF.
Press the button for 3 seconds or
more to turn OFF.
When the power is ON, it is lit blue.
When the battery level is low, it
flashes.
Status LED
Indicate the status of wireless and
battery level.
Answer Buttons
Select the answer.
Inserting and Charging the Battery Pack
Before use, insert the battery pack and check whether it is charged.
➊
Insert the battery pack in the tablet.
Insert the supplied battery pack in
the battery box on the underside of
the tablet.
Tablet underside
Battery box lid
Battery pack
Caution
・Insert the battery pack in the correct direction.
・Only open the battery box when necessary.
10
➋
Connect the computer and the tablet with the USB cable for charging.
When charging starts, the "Status
LED" in the center of the tablet is lit.
When charging is complete, the
"Status LED" turns off.
Charging time: Approx. 4 hours
Caution
・Disconnect the USB cable from the tablet when charging is complete.
・When using the Tablet, make sure that the USB cable is removed.
11
Inserting the Battery into the Pen
Insert the dry cell battery in the pen before
use.
Caution
<Battery replacement period>
When the dry cell battery level is low, the operability may deteriorate.
・Make sure that the polarity (+/-) of the dry cell battery is correct.
・Remove the dry cell battery if the pen will not be used for a long time.
・Do not recharge or short-circuit the dry cell battery.
・Use an AAA alkali dry cell battery. Do not use a rechargeable battery (such as
Ni-Cd).
・The supplied dry cell battery is for an initial operation check. Its operating life
is not guaranteed.
Dry cell
AAA battery
Caution
・Be careful when you remove the pen cap. The dry cell battery may pop out.
・Replace the dry cell battery at least once a year.
12
Installing the Tablet and SRS Software (Image Mate Accent)
The Tablet and SRS software (Image Mate Accent) is used to perform operations such as the
basic drawing operations and need to be installed before you use the Tablet and SRS.
Install the Tablet and SRS software (Image Mate Accent) by following the procedure
described below.
The installation is required only one time for each computer when it is used with the Tablet
and SRS for the first time. (This procedure is not required every time you use the Tablet and
SRS.)
■ Installation
① Click IMAccSRS_setup_1.04.2335_release.exe
② Select "English" from the menu.
③ Follow the on-screen instructions to install.
13
When installation is complete, the "SRS DEMO" icon
is displayed on the desktop.
Depending on your computer, restart computer message may appear.
Caution
If the restart computer message is displayed, press the "Yes" button to restart the computer.
When the computer restarts, the "Image Mate Accent" icon is displayed on the desktop.
④ UnZip IMAccSRS_1.04.2335_release_diff.zip
⑤ Drag and Drop the 3 files from “IMAccSRS_1.04.2335_release_diff “ folder into the
“C:¥Program Files¥ELMO¥Image Mate accent “ folder to update below files,
･Image_Mate_Accent.exe
･SrsDaemon.exe
･SRSManager.dll
⑥ Click the "SRS DEMO" icon
is displayed on the desktop to start.
■ Uninstallation
To remove the Tablet software (Image Mate Accent) from your computer, use your operating
system's uninstallation function.
14
Loading...