HV-100XG
INSTRUCTION MANUAL
VISUAL PRESENTER
Please read this instruction manual carefully before using this Visual Presenter and
keep it for future reference.
- 1 -
IMPORTANT SAFEGUARDS
Read Instructions – All the
safety and operating instructions
should be read before the
appliance is operated.
Retain Instructions – The
safety and operating instructions
should be retained for future
reference.
Heed Warnings – All warnings
on the product and in the
operating instructions should be
adhered to.
Follow Instructions – All
operating and use instructions
should be followed.
Cleaning – Unplug this
product from the wall outlet
before cleaning. Do not use
liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
Attachments – Do not use
attachments not recommended
by the product manufacturer as
they may cause hazards.
Water and Moisture – Do not
use this product near water - for
example, near a bath tub, wash
bowl, kitchen sink, or laundry
tub, in a wet basement, or near a
swimming pool, and the like.
Accessories – Do not place
this product on an unstable cart,
stand, tripod, bracket, or table.
The product may fall, causing
serious injury to a child or adult,
and serious damage to the
product. Use only with a cart,
stand, tripod, bracket, or table
recommended by the
manufacturer, or sold with the
product. Any mounting of the
product should follow the
manufacturer's instructions, and
should use a mounting accessory
recommended by the
manufacturer.
Ventilation – Slots and
openings in the cabinet are
provided for ventilation and to
ensure reliable operation of the
product and to protect it from
overheating, and these openings
must not be blocked or covered.
The openings should never be
blocked by placing the product on
a bed, sofa, rug, or other similar
surface. This product should not
be placed in a built-in installation
such as a bookcase or rack unless
proper ventilation is provided or
the manufacturer's instructions
have been adhered to.
Power Sources – This product
should be operated only from the
type of power source indicated
on the marking label. If you are
not sure of the type of power
supply to your home consult your
appliance dealer or local power
company. For products intended
to operate from battery power, or
other sources, refer to the
operating instructions.
- 2 -
Grounding or Polarization –
This product may be equipped
with either a polarized 2-wire AC
line plug (a plug having one
blade wider than the other) or a
3-wire grounding type plug, a
plug having a third (grounding)
pin. The 2-wire polarized plug
will fit into the power outlet only
one way. This is a safety feature.
If you are unable to insert the
plug fully into the outlet, try
reversing the plug. If the plug still
fails to fit, contact your
electrician to replace your
obsolete outlet. Do not defeat the
safety purpose of the polarized
plug. The 3-wire grounding type
plug will fit into a grounding type
power outlet. This is a safety
feature. If you are unable to
insert the plug into the outlet,
contact your electrician to
replace your obsolete outlet. Do
not defeat the safety purpose of
the grounding type plug.
Power-Cord Protection –
Power-supply cords should be
routed so that they are not likely
to be walked on or pinched by
items placed upon or against
them, paying particular attention
to cords at plugs, convenience
receptacles, and the point where
they exit from the product.
Lightning – For added
protection for this product during
a lightning storm, or when it is
left unattended and unused for
long periods of time, unplug it
from the wall outlet and
disconnect the antenna or cable
system. This will prevent damage
to the product due to lightning
and power-line surges.
Overloading – Do not overload
wall outlets, extension cords, or
integral convenience receptacles
as this can result in a risk of fire
or electric shock.
A product and cart
combination should be moved
with care.
Quick stops,
excessive
force, and
uneven
surfaces may
cause the
product and
cart combination to overturn.
Object and Liquid Entry –
Never push objects of any kind
into this product through
openings as they may touch
dangerous voltage points or
short-out parts that could result
in a fire or electric shock. Never
spill liquid of any kind on the
product.
Servicing – Do not attempt to
service this product yourself as
opening or removing covers may
expose you to dangerous voltage
or other hazards. Refer all
servicing to qualified service
personnel.
- 3 -
Damage Requiring Service –
Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
When the power-supply cord or
plug is damaged.
If liquid has been spilled, or
objects have fallen into the
product.
If the product has been
exposed to rain or water.
If the product does not operate
normally by following the
operating instructions. Adjust
only those controls that are
covered by the operating
instructions as an improper
adjustment of other controls
may result in damage and will
often require extensive work by
a qualified technician to restore
the product to its normal
operation.
If the product has been
dropped or damaged in any
way.
When the product exhibits a
distinct change in performance
- this indicates a need for
service.
Replacement Parts – When
replacement parts are required,
be sure the service technician
has used replacement parts
specified by the manufacturer or
have the same characteristics as
the original part. Unauthorized
substitutions may result in fire,
electric shock or other hazards.
Safety Check – Upon
completion of any service or
repairs to this product, ask the
service technician to perform
safety checks to determine that
the product is in proper operating
condition.
Heat – The product should be
situated away from heat sources
such as radiators, heat registers,
stoves, or other products
(including amplifiers) that
produce heat.
CAUTION
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
- 4 -
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may
be of sufficient magnitude to
constitute a risk of electric
shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
product.
SA 1965
SA 1966
WARNING:
TO REDUCE THE RISK
OF FIRE OR ELECTRIC
SHOCK, DO NOT
EXPOSE THIS
PRODUCT TO RAIN OR
MOISTURE.
THIS IS A CLASS A
PRODUCT.
IN A DOMESTIC
ENVIRONMENT THIS
PRODUCT MAY CAUSE
RADIO
INTERFERENCE IN
WHICH CASE THE USER
MAY BE REQUIRED TO
TAKE ADEQUATE
MEASURES.
INFORMATION
This equipment has been
tested and found to comply with
the limits for a Class A digital
device, pursuant to Part 15 of
the FCC Rules. These limits are
designed to provide reasonable
protection against harmful
interference when the
equipment is operated in a
commercial environment. This
equipment generates, uses,
and can radiate radio frequency
energy and, if not installed and
used in accordance with the
instruction manual, may cause
harmful interference to radio
communications. Operation of
this equipment in a residential
area is likely to cause harmful
interference in which case the
user will be required to correct
the interference at his own
expense.
USER-INSTALLER
CAUTION:
Your authority to operate this
FCC verified equipment could
be voided if you make changes
or modifications not expressly
approved by the party
responsible for compliance to
Part 15 of the FCC rules.
- 5 -
BEFORE YOU USE
Use the Visual Presenter under the rated electrical conditions.
Do not leave the Presenter under direct sunlight or by heaters, or the
Presenter may be discolored, deformed, or damaged.
Do not place the Presenter in any humid, dusty, windy or vibrating
location. Use the Presenter in the following environmental conditions:
Temperature: 0°C~40°C (32°F~104°F)
Humidity: 30%~85% (No condensation)
Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such
as thinner or benzine.
Do not directly point the camera lens into the sun, or the camera may be
damaged.
- 6 -
CONTENTS
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
BEFORE YOU USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. SETTING UP AND STORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2-1 SETTING UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2-2 STORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
2-3 ZOOMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. TROUBLESHOOTING HINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
- 7 -
Camera Head
1
Arm
2
Base Unit
3
Main Stage
4
Auxiliary Stage
5
Lamp Switch [LAMP]
7
Image Input Selection Switch [INPUT]
8
Power Switch [POWER]
9
Power Terminal [DC IN 12V]
10
AC Adapter
13
Analog RGB Cable
12
Accessory Case
11
Lamp
6
1. PART NAMES AND FUNCTIONS
Anti-theft key-hole
- 8 -
Name
Camera Head
Arm
Base Unit
Main Stage
Auxiliary Stage
Lamp
Lamp Switch [LAMP]
Image Input Selection
Switch [INPUT]
Power Switch [POWER]
Power Terminal
[DC IN 12V]
Accessory Case
Analog RGB Cable
AC Adapter
Function
Moving up/down the camera head can change the
size of an object in display on the monitor screen
smoothly.
A link part for moving the camera head horizontally.
A base part of the Presenter.
A stage for placing an object thereon.
Use this stage, if necessary, according to the object
size.
To be used when the image is dark.
Lamp ON/OFF switch.
To switch the image output from the RGB-out
terminal [RGB OUT].
[RGB IN] . . Image via the RGB-in terminal
[RGB INPUT]
[MAIN] . . . . Image via the main camera
Power ON/OFF switch.
The DC jack of the AC adaptor is inserted into this
terminal (12VDC).
A case for housing the AC adaptor and the analog
RGB cable exclusively. When the Presenter is
stored, house this case inside the stage.
To connect the Presenter to the monitor/projector.
To connect the Presenter to an outlet (120VAC).
13
12111098
765
4
3
2
1
No.
- 9 -
Zoom Lamp
15
Digital Zoom Button
[DIGITAL ZOOM]
14
Gain Button [GAIN]
16
Auto White Balance Switch [AWB]
17
Auto Electronic Shutter Switch [AES]
18
Gamma Value Selection Switch [ ]
19
RGB-in Terminal [RGB INPUT]
20
RGB-out Terminal [RGB OUTPUT]
21
-Normally ON
-Normally ON
-[NORM.] is standard.
- 10 -
Name
Digital Zoom Button
[DIGITAL ZOOM]
Zoom Lamp
Gain Button [GAIN]
Auto White Balance
Switch [AWB]
Auto Electronic Shutter
Switch [AES]
Gamma Value Selection
Switch [ ]
RGB-in Terminal
[RGB INPUT]
RGB-out Terminal
[RGB OUTPUT]
Function
To operate digital zoom. Use the Digital zoom after
moving the camera head to the lowest horizontal
position (the minimum shooting area), and the image
is expanded even more. The zoom button
[TELE]/[WIDE] can change the size of an object in
display on the monitor screen. Pressing [TELE] and
[WIDE] buttons together resets the digital zoom to
the initial state (non-action).
Note: - The digital zoom will degrade the
image quality.
- Turning ON the power supply resets
the digital zoom to the initial state
(non- action).
To indicate the digital zoom operation. When the
digital zoom is in operation, this lamp is
flickering/lighting.
To adjust the image brightness by manipulating the
gain button [UP]/ [DOWN]. Pressing [UP] and
[DOWN] buttons together resets the gain to the initial
state.
Note: - Turning ON the power supply resets
[GAIN] to the initial state.
To turn the auto white balance operation ON/LOCK.
Turning this switch LOCK locks the white balance.
Note: - If the auto tracking is disabled for
some objects or the source of light,
shoot a white object to operate the
white balance, and then turn LOCK
the auto white balance switch [AWB]
before using.
To turn the auto electronic shutter ON/OFF.
Note: - If the image flickers, turn the auto
electronic shutter switch [AES] OFF.
The gamma value selection switch is used for
adjusting the brightness tone to that of a unit in
connection. In normal use, this switch is set at
[NORM.]. According to the unit in connection or the
object, select the optimum position.
[HIGH] . . . .To intensify the contrast. This level fits
when the object is document etc.
[NORM.] . . Normal
[LOW] . . . . To diminish the contrast. This level fits
when a CRT monitor is connected.
To connect other image output unit. The image is
output from the RGB-out terminal [RGB OUTPUT]
when the image input selection switch [INPUT] is set
accordingly.
To output the image to the monitor or protector in
connection to this terminal.
21
20
19
18
17
16
15
14
No.
- 11 -
2-1 SETTING UP
OPEN
OPEN
STAGE
STAGE
OPEN
OPEN
STAGE
STAGE
<Accessory case>
AC adaptor
Analog RGB
cable
2. SETTING UP AND STORING
Latch parts
Make sure that the power switch
[POWER]
is
OFF, and then remove all cords connected to
the Presenter.
Move the camera head to be in line with the
arm horizontally.
House the auxiliary stage inside the main
stage, and then fold the main stage. At this
time, house the accessory case inside the stage.
Note: - Confirm that the accessory
case is closed firmly before
housing.
Make sure that all movable parts are put
back to storing position accordingly.
Convex
part of the
arm side
Convex part
of the base unit
Convex part
of the main
stage side
Concave part of
the main stage
2-2 STORING
Gently release the clipped area (as marked
with arrow) of the right and left stages as
illustrated.
Note:- It may be damaged by un-
latching the stages putting
hands on other position not
shown by arrows.
- When the accessory case is
housed inside, be careful not to
drop it.
Connect the RGB-out terminal
[RGB
OUTPUT]
of the Presenter to the monitor/
projector with the RGB cable (supplied).
Note: - Before starting connection, turn
OFF the power supply to each unit.
Connect the AC adaptor, and turn the power
switch
[POWER]
to ON.
Instruction for location:
-Please note that the image may be
affected by unsightly shadows caused
from other lights in the room or from the
outside. This effect can usually be
eliminated or reduced by repositioning
the HV-100XG being mindful of the
ambient lights.
- 12 -
Note: -
Analog NTSC or S-Video monitors can not be used.
-
A monitor or projector having a resolution of 1024x768 is
recommended.
Example of connection
To power outlet
To the RGB-in terminal
of the monitor or projector
Analog RGB cable (supplied)
AC adaptor (supplied)
(Backside of the Base Unit)
Analog RGB cable
Monitor Projector
2-3 ZOOMING
Zoom-out
Expand more
Digital zoom
Zoom-in
By moving up/down the camera head, the object in display on the monitor screen can
be zoomed-in or zoomed-out. And use the Digital zoom after moving the camera head to
the lowest horizontal position (minimum shooting area), and the image is expanded
even. But the digital zoom will degrade the image quality. In zoom operation by moving
up/down the camera head, focus adjustment is not required (FOCUSFREE).
- 13 -
• Is the analog RGB cable connected properly?
• Is the AC adapter inserted correctly?
• Is the DC jack inserted firmly in the power
terminal
[DC IN 12V] of the Presenter?
• Is the power switch [POWER] ON?
• Is the image-in selection switch [INPUT] set at
[RGB IN]?
Symptom
No image is on the monitor or
project.
Checkpoint
If the trouble still remains after checking the above, consult your dealer or an
authorized ELMO service center.
The image is too dark.
The image of printed matter is
striped.
• Is the illumination sufficient? If not, turn ON the
lighting unit with the illumination switch [LAMP].
• Is this caused by the interference between the dots
of the printed matter and the scanning line of the
TV?
3. TROUBLESHOOTING HINTS
Image with digital zoom is
blurry.
• The digital zoom feature normally will degrade the
image quality somewhat.
- 14 -
General
Power voltage 12VDC
Power consumption 9VA
Outside dimensions <Unfolded> 361mm(W)x282mm(D)x161-284mm(H)
(14.2in.(W)x11.1in.(D)x6.3-11.2in.(H))
<Folded> 59mm(W)x282mm(D)x161mm(H)
(2.3in.(W)x11.1in.(D)x6.3in.(H))
Mass 1.5kg (3.3lbs)
Optical
Lens F: 2.9, f= 3mm
Shooting area <Max.> 364mmx271mm (14.3in.x10.7in.)
<Min.> 179mmx135mm (7.1in.x5.3in.)
Camera
Image pick-up element Progressive square picture element 1/3"size CCD
Image pick-up speed 20 frames/sec
Total picture elements 1077(H)x788(V) . . . 850,000 pixels
Effective picture elements 1024(H)x768(V)
Resolution 600 TV lines or more (Horizontal)
600 TV lines or more (Vertical)
Sync. signal frequency 48.363kHz (Horizontal)
60.004Hz (Vertical)
Output signal Analog RGB, 1024x768 at 60Hz, compliant with VESA
Digitalzoom 4x
White balance Full auto/Lock
Gamma adjustment Provided (3-position selection switch)
Gain adjustment Provided (UP/DOWN pushbutton switch)
Ext. input selection Provided (Main camera / Ext. selection switch)
Ext. input terminal D-sub 15-pin (Analog RGB signal) 1 pc
Output terminal D-sub 15-pin (Analog RGB signal) 1 pc
Supplied accessories
Accessory case 1pc
Analog RGB cable (Mini DSUB 15P connector) 1pc
AC adaptor 1pc
Instruction manual 1pc
Warranty card 1pc
These specifications are subject to change without prior notice.
Trademark Acknowledgements
, ELMO are registered trademarks of ELMO CO., Ltd.
VESA is a resistered trademark of Video Electronics Standards Association.
FOCUSFREE is a trademark of ELMO CO., Ltd.
4. SPECIFICATIONS
WARNING:
Unauthorized recording of copyrighted slide
films, materials, photographs, etc. may infringe
on the rights of copyright owners and be contrary
to copyright laws.
ELMO CO., LTD.
6-14, Meizen-cho, Mizuho-ku,
Nagoya, 467-8567, Japan
OVERSEAS SUBSIDIARY COMPANIES
U.S.A. ELMO Mfg. Corp.
1478 Old Country Road, Plainview, NY 11803-5034
Tel:(516)501-1400 Fax:(516)501-0429
E-mail:elmo@elmousa.com
web:http://www.elmousa.com/
Canada ELMO Canada Mfg. Corp.
44 West Drive, Brampton, Ontario L6T 3T6
Tel:(905)453-7880 Fax:(905)453-2391
E-mail:info@elmocanada.com
web:http://www.elmocanada.com/
Germany ELMO (Europe) G.m.b.H
Neanderstr. 18, 40233 Düsseldorf
Tel:(0211)376051 Fax:(0211)376630
E-mail:elmoeurope@AOL.com
web:http://www.elmo.de/
Printed in China
6X1VHHA02
Loading...