Ellion DVR-515A(PAL), dvd-530s(pal) User Manual

Precautions

Precautions

2

IMPORTANT

The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

CAUTION : TO PREVENT THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

The exclamation point within an
equilateral triangle is intended to alert
the user to the presence fo important­operating and maintenance(servicing)
instructions in the literature
accompanying the appliance.

Note : This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION

This product satisfies FCC regulations when shielded cables
and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with
electric appliances such as radios and televisions, use
shielded cables and connectors for connections.

CAUTION

• Use of controls or adjustments or performance of procedures
other than those specified here may result in hazardous
radiation exposure.

• The use of Optical instruments with this product will
increase eye hazard.

CAUTION

This product contains a laser diode of higher class than 1. To ensure continued safety,
do not remove any covers or attempt to repair. Refer all servicing to qualified
personnel.

The following caution appears on rear of the unit.

CAUTION : LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.

VORSICHT : LASERS TRAHLUNG, WENN ABDECKUNG

GEÖFFENT NIICHT DEM STRALHL
AUSSETZEN!

ADVARSEL : LASERSTRÄLING VED ÃBNING UNDGÃ

UDSÆ TTEL SE FOR STRÃLING.

VARNING : LASERSTRÃL NING NÃR DENNA DEL ÃR

ÖPPNAD BETRAKTA EJ STRÃLEN.

VARO! : AVATTAESSA ALTISTUT LASERSÃTBL

YLLE ÃLÃ KATSO SÃTEESEN

These labels can be found on the unit's rear panel. Ces étiquelttes se trousent sur le fond de Pappareil.

WARNING

This product incorporates copyright protection technology that is protected by method claims of certain U.S Patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be Authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER
COVERSHIELD)

This product is in conformity with the EMC directive
and low-voltage directive.

Important Safety Instructions

3

• READ INSTRUCTIONS -

All the safety and
operating instructions should be read before the
product is operated.

• RETAIN INSTRUCTIONS -

The safety and
operating instructions should be retained for
future reference.

• HEED WARNINGS -

All warnings on the
product and in the operating instructions should
be adhered to.

• FOLLOW INSTRUCTIONS -

All operating

and use instructions should be followed.

• CLEANING -

Unplug this product from the wall
outlet before cleaning. The product should be
cleaned only with a polishing cloth or a soft dry
cloth. Never clean with furniture wax, benzene
secticides or other volatile liquids since they
may corrode the cabinet.

• ATTACHMENTS -

Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.

• WATER AND MOISTURE -

Do not use this
product near water - for example, near a
bathtub, wash bowl, kitchen sink, or laundry tub;
in a wet basement; or near a swimming pool;
and the like.

• ACCESSORIES -

Do not place this product on
an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.

• CART -

A product and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces
may cause the product
and cart combination to
overturn.

• VENTILATION -

Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and to
protect it from overheating, and these openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer's instructions have been adhered to.

• POWER SOURCES -

This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.

• LOCATION - T

he appliance should be

installed in a stable location.

• NONUSE PERIODS -

The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.

• GROUNDING OR POLARIZATION

-

If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.

- If this product is equipped with a three-wire

grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the grounding type plug.

• POWER-CORD PROTECTION -

Power­supply cords should be routed so that they are
not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.

• OUTDOOR ANTENNA GROUNDING -

If an
outside antenna or cable system is connected to
the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode. See Figure A.

• LIGHTNING -

For added protection for this
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the product due to lightning and
power-line surges.

• POWER LINES -

An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep
from touching such power lines or circuits as
contact with them might be fatal.

• OVERLOADING -

Do not overload wall
outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.

• OBJECT AND LIQUID ENTRY -

Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a fire
or electric shock. Never spill liquid of any kind
on the product.

• SERVICING -

Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.

• DAMAGE REQUIRING SERVICE -

Unplug
this product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:

- When the power-supply cord or plug is

damaged.

- If liquid has been spilled, or objects have fallen

into the product.

- If the product has been exposed to rain or

water.

- If the product does not operate normally by

following the operating instructions. Adjust only
those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.

- If the product has been dropped or damaged

in any way.

- When the product exhibits a distinct change in

performance - this indicates a need for service.

• REPLACEMENT PARTS -

When
replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.

• SAFETY CHECK -

Upon completion of any
service or repairs to this product, ask the service
technician to perform safety checks to
determine that the product is in proper operating
condition.

• WALL OR CEILING MOUNTING -

The
product should not be mounted to a wall or
ceiling.

• HEAT -

The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.

Important Safety

Instructions

Table of Contents

Table of Contents

4

Before You Start

What's in the box

...................................................

5

Putting the batteries in the remote control

.....

5

Using the remote control

.....................................

5

Compatible Discs

..................................................

6

Connection

Connection for Video Output Terminals

.........

13

Connection for Audio Output Terminals

.........

14

Connection for A/V Input Terminals

................

14

Connection for DV IN

...........................................

14

Controls & Display

Front Panel

.............................................................

7

Display

......................................................................

8

Rear Panel

..............................................................

9

Remote Controller Unit

........................................

10

Basic Playback

Playing a DVD

........................................................

15

Playing a DVD±RW or DVD± R disc

................

15

Playing an Audio CD

............................................

15

Playing a Picture CD

............................................

16

Playing JPEG disc

................................................

16

Advanced Playback

Fast Forward/Backward

......................................

17

Skip Forward/Backward

......................................

17

Slow Forward (DVD)

............................................

17

Frame by Frame Playback (DVD)

....................

17

Program Playback (Audio CD)

..........................

18

OSD (On Screen Display)

..................................

19

Selecting Subtitles (DVD only)

..........................

19

Selecting Audio Languages (DVD only)

.........

20

Repeating a Title, Chapter

.................................

20

A-B Repeat (DVD only)

.......................................

21

ZOOM Screen

........................................................

21

Switching the Camera Angle (DVD only)

.......

22

Direct Search (DVD)

............................................

22

Using the Setup Menu

Basic Operations

...................................................

33

General

....................................................................

33

Playback

..................................................................

34

Record

......................................................................

36

Language

................................................................

36

Channel Scan

........................................................

37

Clock

.........................................................................

39

Recording

Simple recording

...................................................

23

OTR (One touch Timer Recording)

.................

23

Timer Recording

....................................................

24

Timer review - changing and erasing

record settings

....................................................

25

Recording from a digital camcorder

................

25

Editing

Editing a DVD±RW or DVD± R disc

.......................

26

Play disc (DVD±RW/DVD±R)

...........................

26

Rename disc (DVD±RW/DVD± R)

...................

26

Erase disc (DVD±RW only)

...............................

27

Record a new title (DVD±RW/DVD±R)

..........

27

Overwrite disc (DVD±RW only)

........................

28

Lock disc (DVD±RW only)

..................................

28

Finalize disc (DVD±R only)

................................

29

Editing a title of DVD±RW or DVD±R

...................

29

Play title (DVD±RW/DVD± R)

.............................

30

Edit title (DVD±RW/DVD±R)

.............................

30

Rename title (DVD±RW/DVD± R)

....................

31

Erase title (DVD±RW only)

.................................

31

Overwrite title (DVD±RW only)

.........................

32

Additional Information

Specifications

.........................................................

40

Troubleshooting

.....................................................

41

Before You Start

5

Before You Start

What's in the box

Thank you for buying this product. Please confirm
that the following accessories are in the box when
you open it.

Using the remote control

Keep in mind the following when using the
remote control :

• Make sure that there are no obstacles between
the remote and the remote sensor on the unit.

• Remote operation may become unreliable if
strong sunlight or fluorescent light is shining on
the unit's remote sensor.

• Remote controllers for different devices can
interfere with each other. Avoid using remotes for
other equipment located close to this unit.

• Replace the batteries when you notice a fall off in
the operating range of the remote.

Accessories

Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:

• Don't mix new and old batteries together.

• Don't use different kinds of batteries together-although
they may look similar, different batteries may have
different voltages.

• Make sure that the plus and minus ends of each battery
match the indications in the battery compartment.

• Remove batteries from equipment that isn't going to be
used for a month or more.

• When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction's rules that apply in your country or area.

NOTE

Putting the batteries in the remote
control

1

Open the battery compartment
cover on the back of
the remote control.

2

Insert two AA/R03 batteries into
the battery compartment
following the indications
(+, -) inside the
compartment.

3

Close the cover.

Remote control

AA dry cell batteries x 2

RF cable

Operating instruction

(this manual)

Audio/Video cable

Before You Start

Before You Start

6

DVD V

ideo compatibility

• Single-sided or double-sided
discs.

• Single layer or dual layer discs.

• Dolby Digital, DTS, MPEG or

Linear PCM digital audio.

• MPEG-2 digital video Discs are generally divided
into one or more titles. Titles may be further
subdivided into chapters.

Compatible Discs

Any disc that displays one of the following logos
should play in this system. Other formats, including
DVD-RAM, DVD-ROM, DVD-Audio, SACD and
CD-ROM will not play.

Audio CD compatibility

• 12cm or 8cm discs

• Linear PCM digital audio

• CD-Audio, CD-R and CD-RW

formatted CDs are divided into

tracks.(This unit can play CD-R
and CD-RW discs recorded in CD Audio or Video
CD format, or Kodak picture CD files.)

DVD-R compatibility

• This unit can play DVD-R
discs recorded as DVD video
format.

DVD±R/RW

• This unit can play DVD+R and
DVD+RW discs recorded as
DVD video format.

• Also this unit can record the
video and audio signal in
DVD+R or DVD+RW disc.

• Also this unit can record the
video and audio signal in
DVD-R or DVD-RW disc.

• DVD-R and CD-R/RW discs recorded using a personal
computer may not play if the disc is damaged or dirty, or
if there is dirt or condensation on the player's lens.

• If you record a disc using a personal computer, even if it
is recorded in a compatible format, there are cases in
which it may not play because of the settings of the
application software used to create the disc.

CAUTION

DVD Video regions

All DVD Video discs carry a region mark on the case
somewhere that indicates which region of the world
the disc is compatible with. Your DVD player also has
a region mark, which you can find on the rear panel.
Discs from incompatible regions will not play in this
player. Discs marked ALL will play in any player.

Controls & Display

7

Controls & Display

1

STANDBY/ON

To switch the unit on or into Standby.

6

STOP

Press to stop a disc playing.

7

PREVIOUS (Skip Backward)

To skip to the previous chapter or track.

8

NEXT (Skip Forward)

To skip to the next chapter or track.

9

SELECT

Used to select the menu item.

3

OPEN/CLOSE

To open or close the disc tray.

4

FL DISPLAY

Displays operation status.

5

PLAY/PAUSE

Press to start or pause a disc playing.

2

DISC TRAY

Put a disc to be played in here.

13

CHANNEL DOWN/UP

Used to select the preset TV channels.

12

RECORD

Press to start a disc recording.

11

RECORD MODE

To select the record quality.

16

S-VIDEO IN

Connect to S-VIDEO Output of camcorder.

17

DV IN

Digital input jack for use with a digital video
camcorder. This jack is for connection to DV
camcorder only. It is not compatible with
other digital equipments.

15

COMPOSITE VIDEO IN

Connect to Composite Video Output of
camcorder.

14

AUDIO IN

Connect to Audio Output of camcorder.

10

SOURCE

Used to select an external input.

Front Panel

1 2 3 4 5 6 7 8

9

101112151617 1314

Controls & Display

Controls & Display

8

Display

1

TIMER Recording Indicator

Illuminates when timer recording is on.

6

ROTATION

Rotates when the disc is spinning.

7

REPEAT Indicator

Illuminates when the current play mode is
under repeat title, chapter, track (single), A-B,
disc (all) respectively.

8

PROGRAM

Indicates the program playback.

9

OPERATING Information

Indicates title, Chapter and Track number
and Time, TV channel.

3

ANGLE

Indicates the current disc being played is
viewed as multi angle.
This function only works for discs having
scenes recorded at different angles.

4

TITLE Indicator

Title number for DVD playback.

5

CHAPTER Indicator

Chapter number for DVD playback.

2

DOLBY DIGITAL Indicator

Indicates Dolby Digital 5.1CH playback.

6 7 8 9

1 2 3 4 5

Controls & Display

9

Controls & Display

1

AC POWER CORD

Connect to the wall outlet.

5

COMPONENT VIDEO OUT

Connect to Component Video Inputs of TV.

7

DIGITAL AUDIO OUT

Connect COAXIAL OUT to Digital Audio
Input (coaxial type) of Audio AMP.
Or connect OPTICAL OUT to Digital Audio
Input (optical type) of Audio AMP.

8

EURO AV IN/OUT

Connect to Euro AV in/out of AV equipment
such as VCR, DVD player, etc.

9

EURO AV OUT

Connect to Euro AV input of TV.

6

VIDEO OUT

Connect CVBS to Composite Video Input of
TV or monitor.
Or connect S-VIDEO to S-Video Input of TV
or monitor.
S-Video provides better picture quality than
composite video.

3

VIDEO IN

Connect CVBS to Composite Video Output
of VCR or Set-Top Box.
Or connect S-VIDEO to S-Video Output of
VCR or Set-Top Box.

4

5.1 CH AUDIO OUT

Connect to analog Audio Inputs of Audio
AMP.
If you want to connect to TV, connect FRONT
L and R to Audio Inputs of TV.

2

AUDIO IN

Connect to Audio Output of VCR or Set Top
Box.

Rear Panel

1 2 3 4

5

6 7 8 9

10 11

10

RF IN

Connect to external antenna.

11

RF OUT

Connect to Antenna Input of TV.

Controls & Display

Controls & Display

10

A

Remote Controller Unit

A-B

To repeat a certain section.

ANGLE

To view with a different frame angle.

ARROW ( )

To select a menu item.

AUDIO

To select the audio language.

AV IN

To select an external audio and video input to use
for recording.

DISPLAY

To view the Title, Chapter, Track information or
Subtitle Language, Audio Language, Repeat
mode.

DV IN

To select a digital A/V input from a DV camcorder.

C

CHANNEL DOWN / UP

Used to select the preset TV channels.

CL(CLEAR)

Used when discarding wrong number input.

CM SKIP

For moving to a scene after 30 seconds.
(about the length of a typical TV commercial)

D

DIMMER

This adjusts the FL display brightness of front
panel.

Controls & Display

11

Controls & Display

M

MENU

Used to display the contents menu of the loaded
DVD disc.

MUTE

To turn on/off audio outputs.

N

O

OPEN/CLOSE ( )

Press button to open or close the disc tray. If
pressed under STANDBY, power is automatically
turned on and the tray is opened.

F

FWD ( )

Press for fast forward scanning during playback.

NEXT ( )

To skip to the next chapter or track.

NUMERIC (0~9)

Used from the menu to select, Title/Chapter search
and direct track number.

E

EDIT-DISC

To edit a disc : Rename disc, Erase disc, Overwrite
disc.

EDIT-TITLE

To edit a title : Insert chapter, Remove chapter,
Hide chapter.

ENTER

Used to select the menu item.

G

GOTO

To move to a specific time in a track or title.

P

PAUSE ( )

When you press this button during playback, you
can view the still picture.
Each time you press this button, you can see one
frame at a time.

PLAY ( )

To play the loaded disc.

PREV ( )

To skip to the previous chapter or track.

PROGRAM

To playback in a specific order.

REC (Record)

To record TV programs.

REC MODE

To select the record quality.

REPEAT

To select a repeat mode.

R

REPLAY

To play back again from the scene of previous 10
seconds.
It is a useful function to learn a foreign language.

RETURN

To move to a previous menu.

REV ( )

Press for fast reverse scanning during playback.

Controls & Display

Controls & Display

12

T

TIMER REC

To set a timer recording.

TITLE

To display the title menu of the DVD.

TV/DVD

To switch between “TV mode” in which you get the
picture and sound from the recorder’s tuner,
and “DVD mode” in which you get the picture and
sound from DVD disc.

TV MODE

Set up TV type according to type supported by
user's TV.
Each time you press this button repeatedly, the TV
type will change among NTSC, PAL and
progressive scan.

S

SETUP

To change the initial settings.

STANDBY/ON ( )

Activates the unit POWER ON or into STANDBY.

STOP ( )

To stop a disc playing.

SUBTITLE

To select the subtitle language.

Z

ZOOM

Enlarges DVD screen image up to 2 times.

Connection

13

Connection

• RF OUT, is labeled TO TV, is signal pass-thru only.

• A S-Video cable, Scart cable, optical cable and DV cable are not supplied.

NOTE

Connection for Video Output Terminals

Composite Video (CVBS) Output

The composite video output is supported by most televisions.
The composite video jack on TV is usually yellow and may be labeled video, CVBS, composite. Connect
“Front L” and “Front R” to AUDIO INPUT (L/R) on TV and set “Analog Audio Output” to “ LR Stereo” from the
PLAYBACK SETUP menu.

EURO AV Output

The Euro AV terminal can be connected to TV equipped with Euro AV connector.
The audio transmitted on the Euro AV is stereo sound.

S-Video Output

The S-Video output can be connected to the TV equipped with an S-Video input.
The S-Video jack on TV may be labeled S-Video, Y/C, S-VHS.
The S-Video provides better picture than the composite video.

Component Video Output

The component video output can be connected to the TV equipped with component input.
The component video jacks on TV may be labeled YUV, Y/Pb/Pr, Y/Cb/Cr and may be green, blue, red.
The component video provides the best picture.
If you want to view a progressive scan TV via Y/Pb/Pr, set “Component output” to “Progressive” from
GENERAL SETUP menu.

Connection

Connection

14

Connection for Audio Output Terminals

You can enjoy the Dolby surround sound by
connecting 5.1ch audio output or digital audio
output to the audio amplifier.

5.1ch Audio Output

Use 5.1ch audio outputs for connection with your

5.1ch A/V receiver or amplifier.
From the PLAYBACK SETUP menu, set “Analog
Audio Output” to “5.1 CH”.

Digital Audio Output

Use digital audio outputs for connection with
Dolby Digital or DTS decoder.
From the Digital Audio Output menu, select
“RAW” or “LPCM” according to your decoder.

Connection for A/V Input Terminals

You can record programs from AV system such
as VCR, DVD player, Camcorder, etc.

Audio Input

Connect the Audio Input to the Audio Output of
AV system.

Video Input

Connect the Composite Video or S-Video Input to
the Composite Video or S-Video Output of AV
system.
Or connect the Euro AV IN/OUT to the Euro AV
OUT of AV system.

Connection for DV IN

Using the DV IN, it is possible to read digitally the
contents of DV tapes.

DV Input

Connect the DV IN to the DV in/out jack on your
camcorder using a DV cable(not supplied).