Elk products ELK-MM220 User Manual

Magic Module™Series

ELK-MM220 Module, 2 Input, 2 Output, Programmable
ELK-MM443 Module, 4 Input, 4 Output, Programmable
ELK-MV480 Voice Module, 400 Recordable Channels
ELK-MK400 Starter Kit, Includes ELK-MM443 & ELK-MB485
ELK-MK485 Programmers Kit,ELK-MB485, Cables, Software
ELK-MK420 iButton™ Access Kit w/ MM443, MA100, MA101
ELK-MA100
ELK-MA101 iButton "Touchkeys", 10 pcs w/keyring holders
ELK-MA290 Proximity / Wiegand Data Interface to MM443
ELK-MC100 Clock / Calendar Module for ELK-MM443
ELK-MT100 Temperature Sensor Module for ELK-MM443
ELK-MK410 X-10® Transceiver Kit, Programmed ELK-MM443

Notice: It is recommended that the entire system be completely tested on a
regular basis. However, despite frequent testing, and due to, but not limited to,
criminal tampering or electrical disruption, it is possible for this product to fail to
perform as expected.
Any system of any type may be compromised deliberately or may fail to operate
as expected for a variety of reasons.

Elk Products, Inc. (“Manufacturer”) warrants to the original purchaser (the “Customer”)
that the products it manufactures (“Product”) shall be free from defects in material and
workmanship at time of shipment. Manufacturer’s obligations under this Limited
Warranty shall be limited to repairing or replacing, at its option, free of charge, any
product returned to Manufacturer freight prepaid. Manufacturer shall have no obligation
under this Limited Warranty or otherwise if (1) the Product has been damaged by
negligence, accident, mishandling, lightning or flood, or other Acts of God, (2) the
Product has not been operated in accordance with its operating instructions, (3) the
Product has been altered or repaired by anyone outside Manufacturer’s authorized
facilities (4) adaptations or accessories have been made or attached to the Product
which, in Manufacturer’s sole determination, have adversely affected its performance,
safety or reliability. Products such as batteries and fused transformers have their own
warranties, and are not included in this Limited Warranty.
If a Product should malfunction or fail, contact Manufacturer or one of its authorized
distributors for a Return Authorization (RA) number. Returned Products must include
a complete description of the problem, along with the RA number clearly marked on
outside of the package. Manufacturer will not be responsible for any unnecessary
items included with any returned Product.
THIS WARRANTY IS THE EXCLUSIVE WARRANTY FOR ANY PRODUCT. MANU­FACTURER SPECIFICALLY DISCLAIMS ANY AND ALL OTHER WARRANTIES OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE OR OF MERCHANTABILITY. MANUFACTURER
SHALL NOT BE LIABLE IN TORT, INCLUDING NEGLIGENCE OR STRICT LIABILITY,
AND SHALL HAVE NO LIABILITY AT ALL FOR INJURY TO PERSONS OR PROP­ERTY. MANUFACTURER’S LIABILITY FOR FAILURE TO FULFILL ITS OBLIGATION
UNDER THIS LIMITED WARRANTY OR ANY OTHER LIABILITY IN CONNECTION
WITH A PRODUCT SHALL BE LIMITED TO THE AMOUNT OF THE PURCHASE PRICE
RECEIVED BY MANUFACTURER FOR THE PRODUCT. THE REMEDIES STATED IN
THIS LIMITED WARRANTY ARE THE CUSTOMER’S EXCLUSIVE REMEDIES
AGAINST MANUFACTURER REGARDING ANY PRODUCT. UNDER NO CIRCUM­STANCES SHALL MANUFACTURER BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS AND REV­ENUES, INCONVENIENCE OR INTERRUPTIONS IN OPERATIONS, OR ANY OTHER
COMMERCIAL OR ECONOMIC LOSSES OF ANY KIND. THESE LIMITATIONS AND
DISCLAIMERS ARE NOT MADE BY MANUFACTURER WHERE PROHIBITED BY
LAW. SOME STATES PROHIBIT LIMITATIONS OF WARRANTIES AND THE CUS­TOMER MAY HAVE ADDITIONAL RIGHTS IN THOSE STATES.

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interfer­ence in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna. 2) Increase the separation between
the equipment and receiver. 3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. 4) Consult the dealer or an
experienced radio/TV technician for help.

For more information contact your local Distributor or:
ELK PRODUCTS,INC 828-397-4200 FAX [phone]
http://www.elkproducts.com Email:[e-mail]
06/03

iButton™ "Touchkey" Reader & Interface Pack

LIFETIME LIMITED WARRANTY

Magic Module Series

T wo Input, T wo Output

Programmable Module

ELK-MM220

4K Programmable Memory

APPLICATION:

The ELK-MM220 is an economical stand alone
field programmable controller. It can be pro­grammed and used in a vast array of applications.
It features two digital inputs, two form C relay
outputs.

Magic Module Series

ELK-MM220

Two Input, Two Output

Programmable Module

Programs can be written and stored in non-volatile
EEProm memory using the ELK-MK400 Develop­ment Kit. Typical Applications include: Program­mable Delay Timer, Alarm Memory, Single Zone
Security System, Cross Zoning, Access Control,

Pulse Stretcher, Pulse Counter, Swinger Shutdown.

FEATURES:

•Two Digital Inputs.

•Two Form C Relay Outputs.

•Four Timers, 1/10th Sec. - 255 hours.

•Four General Purpose Counters, 0 - 255.

•Non-volatile EEProm Memory.

•LED Output Indicators.

SPECIFICATIONS:

•Compact Enclosure Size: 4.5" x 3" x 1.2".

•Operating Voltage: 9.6-15 Volts D.C.

•Current Required: 70 mA.

•Relays, 10 Amps @ 120VAC, 7 Amps @ 28VDC.

REQUIRES:

•12 Volts D.C. Power Supply.

•Optional:Starter Development Kit(ELK-MK400).

Features and Specifications subject to change without notice.

828-397-4200 Voice
828-397-4415 Fax
http://www.elkproducts.com
email: [e-mail]

PO Box 100 • Hwy. 70W • Hildebran, NC 28637 • USA

Instructions Printed On Inside

ELK-MM220 HOOK-UP DIRECTIONS

The ELK-MM220 has been factory programmed with a sample application as labeled on
the unit, for other applications it must be reprogrammed before installation. The Program

Development Kit (ELK-MK400) is required to re-program the ELK-MM220 if desired. The Develop­ment Kit contains software and programming instructions needed to program the ELK-MM220. The
program is written using the Elk Magic Module Software and debugged by using the ELK-MM443
Magic Module that is included in the development kit. The program is then download into the ELK­MM220 through a 5 conductor ribbon cable connected between the ELK-MM443 J1 connector and
the ELK-MM220 J5 connector. Note: If using the Clock/Calendar Module(ELK-MC100), temporarily
remove it to gain access to the ELK-MM443 J1 connector.

The ELK-MM220 has two digital inputs that switch from Low to High at approximately 2 Volts. Each
input is jumper selectable at J1 & J2 for an onboard 2K input resistor either pulled up to +12 Volts,
or pulled down to Ground. The ELK-MM220 has two form C relay outputs. Relay 2 is jumper
selectable using J3 to switch the output through a transistor (100mA max). Placing J3 to the OUT
position will disable Relay 2 and allow the Relay 2 COM terminal to be pulled to ground through a
transistor when activated. This setting handles up to 100mA of current and is intended for applica­tions like flashing an LED. If more current or dry contacts are required then set J3 to IN and use the
Relay 2 contacts, the transistor will be disabled.

Test the ELK-MM220 after downloading the program to ensure that it functions as desired. The
ELK-MM220 can be reprogrammed multiple times.

Example Hookup: ELK-MM220 used as a Single Zone Security System

IN1 is a Momentary Key Sw itch, IN2 is a Normally Closed Burglar Loop, Relay 1 is the Alarm Output, Relay 2 is the Status LED

J3 is shown with

Relay 2 out of ciruit,

the COM terminal will

be pulled to ground

when output 2 is

activated

(100ma Max)

JUMPERS J1, J2 ,J3 are

located under cover

+12V position pulls up

IN1 or IN2 through a

2K resistor

GND position pulls

down IN1 or IN2

through a 2K resistor

+12 Volt DC Power Supply

ELK-624 Recommended

ELK-MM220

INPUT 1
SELECT

J1

+12V

GND

+

-

N.O. N.C.

-

+

MOMENTARY
KEY SWITCH

INPUT 2
SELECT

J2

ALARM

SWITCHES

+

-

RELAY 2

+

12 VOLT

SIREN

(ELK-45)

OUT IN

RELAY 2RELAY 1

NO COM NCNO COM NCIN1 IN2 NEG+12V NEG

J3

-

LED

+

1K

J5

PROGRAMMER

RELAYS

ACTIVE

LEDS

D4 D3

1

OUTPUT

2

Input HookupTypes for IN1 and IN2

MM220

Normally Open

Closes to

Ground

INx

NEG

To Input Circuitry

2K

J1 or J2

GND

+12 VDC

GND

will see a
Hi to Low

when
Switch
Closes

Input

Jumper

is set to

+12V

Normally Closed

Opens from

Ground

INx

NEG

To Input Circuitry

2K

J1 or J2

GND

+12 VDC

GND

MM220
will see a
Low to Hi

when
Switch
Opens

Input
Jumper
is set to

+12V

+2 to 12 Volts DC

Normally Open

Closing Switch to

2 to 12 Volts DC

will trip this input

INx

NEG

To Input Circuitry

2K

J1 or J2

GND

+12 VDC

GND

MM220

will see a

Low to Hi

when
Switch
Closes

Input

Jumper
is set to

GND

+2 to 12 Volts DC

Normally Closed

Opening switch will

trip this input

INx

NEG

To Input Circuitry

2K

J1 or J2

GND

+12 VDC

GND

MM220
will see a
Hi to Low

when
switch
Opens

Input
Jumper
is set to

GND