Elk products ELK-MA100 User Manual

* Try these other fine ELK products *

MM443 Magic Module, 4 Input, 4 Output, Programmable
MM447 Automation Controller w/Voice,Caddx Interface
MV480 Recordable Voice Module, 400 Channels
MKHOME1 Home Control Kit for Caddx NX Controls
MK400 Starter Kit, Includes MM443 & MK485
MK485 Programming Kit, MB485, Cables, Software
MK410 X-10
MK420 iButton™ Access Kit w/ MM443, MA100, MA101
MA100 iButton™ ‘Touchkey’ Reader & Interface Pack
MA101
MA290 Proximity / Wiegand Data Interface to MM443
MB485 Data Bus Interface, RS232 to RS485
MC100 Clock / Calendar Module for MM443
ML8 Link Interface to Caddx NX Controls
MT100 Temperature Sensor Module for MM443
MM220 Magic Module, 2 Input, 2 Output, Programmable

1RT Speaker & Stainless Steel Enclosure
150RT Siren & Stainless Steel Enclosure
155RT Voice Siren in Stainless Steel Box

44 Speaker, 30 W,8 Ohm Compact Horn
45 Siren, Compact Horn, 118db
55 Voice Siren, Compact Horn
M120 Siren, Single Tone, 107db, Mini Horn
SP15 Speaker, 15 watt, Small Horn
SP30 Speaker, 30 watt, Horn
SP35 Speaker, 20 watt, Interior
SP40 Speaker, 40 watt, Horn
SS15 Siren, Dual Tone, 110db, Horn
SS30 Siren, Dual Tone, 120db, Horn
SS36 Siren, Dual Tone, 105db, Interior

73 ECHO Speaker, 20 Watt, Interior
74 ECHO Dual Tone Siren, Interior
75 ECHO Voice Siren, Interior
870 ECHO Speaker, Self Amplified

100 High Performance Siren Driver
110 Voice Siren Driver, English & Spanish
120 Recordable Voice Module and Siren
124 Recordable Voice Module, 4 Channels

950 Surge Suppressor, Phone & Power Line
951 Surge Suppressor, Phone - Single Line
955 Surge Suppressor, Phone - Dual Line

912 Compact Relay,12 Vdc, SPDT
912B Heavy Duty Compact Relay,12/24 Vdc, SPDT
924 Sensitive Relay, 12/24 Vdc, DPDT
941 Alarm Output Director
960 Delay Timer Relay, 1 sec. to 60 min.

1240 Battery, Lead Acid, 12v, 5Ah
1270 Battery, Lead Acid, 12v, 8Ah
12100 Battery, Lead Acid, 12v, 12Ah
12170 Battery, Lead Acid, 12v, 18Ah
12250 Battery, Lead Acid, 12v, 25Ah
P112 12 Volts DC, 1 Amp Power Supply w/Enclosure
P124 24 Volts DC, 800mA Power Supply w/Enclosure
P1216 12 Volts DC, 1.5 Amp Power Supply
P412 12 Volts DC, 4 Amp Power Supply
P624 Power Supply & Battery Charger
PD9 Power Distribution Module
965 Low Battery Cutoff and Power Switch
TRG1640 Transformer, 16.5VAC @ 40 VA
TRG2440 Transformer, 24VAC @ 40 VA

129 Computer Sound Card Interface
800 Audio Amplifier, 10 Watts
900-2 “B” Connectors,Unfilled,500 pcs
902-2 “B” Connectors,Gel filled,500 pcs
980 Telephone Line Fault Monitor
998 Warning Alarm System Decals
999 Double Sided Tape
SL1 Strobe Light, 4 colors available
WK1 Wall Mount Kit for SL1 Strobes

For more information contact your local Distributor or:
ELK PRODUCTS,INC 828-397-4200 FAX [phone]

http://www.elkproducts.com Email: [e-mail]

05/02

Magic Module Series

®

Transceiver Kit, Programmed MM443

iButton™ ‘Touchkeys’,10 pcs w/keyring holders

Rust Free Sirens / Speakers

Speakers & Sirens

ECHO™ Sirens & Speakers

Siren & Voice Drivers

Surge Suppressors

Relay Modules

Power Products

Accessories

Magic Module Series

iButton™ 'T ouchkey'

Reader & Interface Pack

ELK-MA100

Contains two accessory components that allow
the ELK Magic Module(ELK-MM443(S)) to read
iButtonTM 'Touchkeys' from Dallas Semiconductor.
Applications include: high security access con­trol, simple on/off switching, password authenti­cation, etc. The small "dime sized" iButton is a
rugged memory device containing a uniquely read­able "non-repeating" serial number.

Magic Module Series

ELK-MA100

iButton

Reader & Interface Pack

Accessory for the ELK Magic Module(ELK-MM443(S)

FEATURES:

• Interface(ELK-MA190) with 6 ft. Modular Cord.

• Reader Probe(ELK-MA110), Two-Wire, with

• Probe Can Be Up To 650' From Reader.

• Overvoltage protection on Data Lines.

•Lifetime Limited Warranty, call for details

SPECIFICATIONS:

• Interface Size: 2.4" X 2.4" (60mm x 60mm).

• Current Draw:10mA (supplied by ELK-MM443).

REQUIRED EQUIPMENT: (not included)

• ELK Magic Module(ELK-MM443(S)).

• iButton

Also available as a pre-programmed access
controller kit (ELK-MK420) w/ 10 iButtons.

Features and Specifications subject to change without notice.

Dallas iButton is a trademark of Dallas Semiconductor Corp.

PO Box 100 • Hwy. 70W • Hildebran, NC 28637 • USA

™

'Touchkey'

Stainless Steel 2" x 4" Wall Mount Plate.

™

'TouchKeys'(ELK-MA101).

828-397-4200 Voice
828-397-4415 Fax
http://www.elkproducts.com
email: [e-mail]

Instructions Printed On Inside

Hook-Up Diagram: iButton™ 'Touchkey' Reader to ELK-MM443

ELK-MM443 MAGIC MODULE

POWER

J3

J5

K3

NO COM

RELAY 3

K4

NC NO COM NC

RELAY 4

INTERFACE MODULE

(ELK-MA190)

QUICK CONNECT

DATA CABLE (8 PIN)

MAGIC MODULE

CIRCUIT BOARD

Connect

GREY

Wire Here

PROBE DATA

PROBE NEG

Connect

BLACK

Wire Here

READER PROBE & WALLPLATE(ELK-MA110)

CAN BE REMOTELY LOCATED UP TO 650

FEET FROM THE INTERFACE MODULE

NOTE: Additional Reader Probes(ELK-MA110)

may be paralled to a single ELK-MA190

READER

PROBE

Reader Probe & Interface Module Hook-Up

1. Place the nylon washer between the round reader probe and the wall plate.

2. Mount the round reader probe into the wall plate, secure with the retaining ring.

3. Mount the Interface(ELK-MA190) near the ELK Magic Module(ELK-MM443) that will be
used for this application.

4. Remove the plastic cover from the Interface.

5. Run a 2 wire cable from the reader probe location to the Interface location.

6. Connect the reader probe's GREY wire to the "PROBE DATA" terminal.

7. Connect the reader probe's BLACK wire to the "PROBE NEG" terminal.
(the data probe's 2 wire length can be extended up to 650 feet with 22 gauge twisted wire)

8. Connect the Quick Connect Data Cable from the J5 connector on the Magic Module to
the Data Interface jack.
(Note: an X-10 power line interface module can not be connected to the Magic Module
when using an ELK-MA190)

9. Replace the plastic cover on the Interface.

10. When properly programmed and power applied, the unique serial number in the Dallas
iButton can be read by the Magic Module just by touching the metal part of the key to the
reader probe.

11. Each Magic Module with the original 256 bytes of program memory space will hold
approximately 20 to 30 iButtons. Additional iButtons may be programmed into another
Magic Module connected to the data bus. The Magic Module with 4k bytes of memory will
hold approximately 512 iButtons.