Page 1
ASSEMBLY INSTRUCTION
ASSEMBLY
1. CAREFULLY LAYOUT ALL PARTS IN A LINE ON A
SMOOTH SURFACE;
2. PLACE THE BASE ON A FLAT SURFACE AND INSERT
THE HARP HOLDER INTO THE HARP BASE;
3. PLACE THE SHADE OVER THE HARP HOLDER;
4. SECURE THE SHADE IWTH FINIAL, OVER AND INNER
CAP;
5. INSTALL BULBS. (NOT INCLUDED.)
6. INSERT PLAG INTO WALL RECEPTACLE.
1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE OUTLET, MAKE SURE THE PUG FULLY
2. IF THE LAP DOES NOT LIGHT, UNPLUG FROM THE OUTLET, CHECK THE BULB FOR A BROKEN
POLARIZED PLUG
LAMPBASE
HARP BASE
LAMPHOIDER
BULB
HARP HOLDER
SHADE
INNER CAP
COVER
FINIAL
GERERAL
CHECK THE BOX CONTENCTS. YOU SHOULD RECEIVE:A SHADE, BASE AND HARP, ENCLOSURE.
TROUBLE SHOOTING:
AND PROPERLY INSERTED.
FILAMENT. REPLACE THE BULB IF NECESSARY. PLUG IN LAMP AND TURN IT ON.
IMPORTANT SAFETY INSTRUCTIONS:
THHIS PORTALBE LAMP HAS A POLARIZED PLUG(ONE BLADE IS WIDER THAN THE OTHER) AS A
SAFETY FEATURE TO REDUCE THE RISE OF ELECTRIC SHOCK. THIS PLUG WILL FIT A POLARIZED
OUTLET OLY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. NEVER USE
WITH A EXTENSION CORD UNLESS THE PLUG CAN BE FULLED INSERTED. DON’T ALTER THE PLUG.
AS WITH ANY ELECTRICAL APPLIANCE, KEEP OUT OF RACH OF CHILDREN.
Loading...