Elkhart Brass SM1000BE, SM2000BE User Manual

X-Stream®

Industrial Electrically Actuated Nozzles

SM1000BE – SM2000BE HL/HLGM

Installation, Operation, & Maintenance Instructions

FOR ATEX APPLICATIONS

WEST BEARDSLEY AVENUE  P.O. BOX 1127  ELKHART IN 46515  [phone]  FAX [phone]

1302

©

2011 ELKHART BRASS MFG. CO., INC.

98369000 REV. REL

PRODUCT SAFETY

Important:

Before installing and operating this equipment, read & study this manual thoroughly. Proper
installation is essential to safe operation. In addition, the following points should be adhered
to in order to ensure the safety of equipment and personnel:

 All personnel who may be expected to operate this equipment must be thoroughly trained in its safe and

proper use.

 Before flowing water from this device, check that all personnel (fire service and civilian) are clear of the

stream path. Also confirm stream direction will not cause avoidable property damage.

 Become thoroughly familiar with the hydraulic characteristics of this equipment, and the pumping

system used to supply it. To produce effective fire streams, operating personnel must be properly
trained.

 Always open and close valves supplying this equipment slowly, so that the piping fills with water

slowly, thus preventing the possible occurrence of water hammer.

 After each use, and on a scheduled basis, inspect equipment per instructions in the maintenance section.
 Keep fingers and hands clear of moving parts
 Disconnect power prior to servicing.
 All equipment must be installed in accordance with ATEX requirements (EN/IEC 60079-14) as

appropriate and in areas where equipment classification is suitable.

WARNING: Do not attempt to disconnect or work on any electrical equipment in this

system unless power is removed or the area is known to be non-hazardous.

NOZZLE INFORMATION:

DETAILS:
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________

2

TABLE OF CONTENTS

I. NOZZLE CALLOUT…………………...…………………………………………..…….……..……….4

II. OVERVIEW…………………………………………………………………………………..….…....…5

III. INSTALLATION INSTRUCTIONS………………………………………………………..….….…….6

IV. SPECIFICATIONS……………………………………………………………….…...………......……..6

V. OPERATING INSTRUCTIONS………………………………………………….…...…..…......…...…6

VI. NOZZLE HYDRAULIC DATA………………………………………………...…………….......……..7

VII. MAINTENANCE………………………………………………………………....………………..…….8

VIII. TROUBLESHOOTING………………………………………………………………..………...………8

*PARTS DRAWING – Please visit our website at www.elkhartbrass.com for the most current parts drawings.

3