Wheelchair Lavatory, Wall Mounted
With Sensor Faucet, AC/Battery Powered
Models WCLWO1923OSDSACC,
WCLWO1923OSDSACMC, WCLWO1923OSDSACTMC ®
SPECIFICATIONS
GENERAL
WCLWO1923OSD #18 gauge, type 304 (18-8) stainless steel
lavatory with 5/32" (4mm) raised rim. Compartment has
1-3/4" (44mm) radius vertical and horizontal coved corners.
2-1/2" (64mm) apron front and both sides. Full length
2-1/2" (64mm) high backsplash. Exposed surfaces are hand
blended to a uniform satin luster finish. Underside is sound
deadened. Furnished with integral stainless steel support
brackets. Rear centered drain outlet. Drain opening size 1-5/8"
(41mm).
With connected overflow. Meets ADA requirements.
requirements.
ADA
Compliant
(CHECK MODEL SPECIFIED)
MIXING
MODEL FAUCET VALVE
WCLWO1923OSDSACC LKB721C NONE
WCLWO1923OSDSACMC LKB721C LK724
WCLWO1923OSDSACTMC LKB721C LK723
LKB721C Sensor-operated, deck-mounted, non-mixing goose-
neck faucet with adjustable sensor eyes. A continuous beam
is emitted from sensor and faucet is activated when hands are
placed under the spout. Water will flow as long as hands
remain withinsensor range. When hands are removed, the
water stops automatically based on shut-off delay setting.
The sensor then resets for the next user.
Chrome-plated solid brass construction with 2.0gpm laminar
flow control on spout end. Includes water-resistant sensor control
module and power cables. Features dual power options: AC
plug-in and battery holder with four AA batteries.
Slow-closing piston operated solenoid valve, in-line filter with
clean out trap and flexible supply hose. Control circuit is solid
state, has adjustable sensor range of 7/8" (22mm) to 6-3/4"
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.
(171mm), shut-off delay preset at 1 second and field adjust-
able to 2 seconds (to prevent sink overflow).
DIMENSIONS
Model
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
WCLWO1923OSD 19 483 23 584 13
1"
(25mm)
F
B
D
3"
(76mm)
A B C D E F G H I
1
/2 343 16 406 23/4 70 4 102 21/2 64 25/8 67 415/16 125
G
E E
1-1/4" (32mm) DIA. 1 HOLE
3-1/2"
(89mm)
9-1/2"
(241mm)
1-3/4" R
(44mm)
C
A
1-5/8" (41mm) DIA.
FINISHED HOLE
RAISED RIM
FRONT & ENDS
1/4" (6mm) x 1" (25mm)
15/16"
(24mm)
5/8"
(16mm)
5"
(127mm)
G
G
F
1-3/4" R
(44mm)
H
4"
(102mm)
8-7/8"
(225mm)
18"
(457mm)
OVERFLOW
HII
Model WCLWO1923OSDSACC
WALL HANGER
1/4"
(6mm)
5"
(127mm)
3/8" (10mm) DIA.
2 HOLES
EACH BRACKET
FINISHED FLOOR
(800mm)
(RECOMMENDED)
Elkay Manufacturing Company
www.elkay.com
5-1/8"
(130mm)
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay Mfg. Co.
(Rev. 4/10) 3-56A
Wheelchair Lavatory, Wall Mounted
With Sensor Faucet, AC/Battery Powered
Models WCLWO1923OSDSACC,
WCLWO1923OSDSACMC, WCLWO1923OSDSACTMC
ROUGH-IN DIMENSIONS
1/4" (6mm) x 1" (25mm) LONG SLOT
3/8" (10mm) DIA. HOLE
1/2" (13mm) IPS SUPPLY INLET
NOTE:
ALL FASTENERS
SUPPLIED BY OTHERS
(4 PLACES)
OUTLINE OF SINK
(4 PLACES)
(2 PLACES)
8-1/16"
(204mm)
2-5/8"
(67mm)
(229mm)
2-5/8"
(67mm)
(203mm)
9"
4-15/16"
(125mm)
8"
9"
(229mm)
4-15/16"
(125mm)
2"
(51mm)
3/16" (5mm) DIA.
HOLES (3 PLACES)
1-1/8" (28mm)
SINK
2-5/8"
(67mm)
IPS W ASTE
21-1/2"
(546mm)
WALL HANGER
13/16"
(21mm)
5"
(127mm)
3-15/16"
(100mm)
14-15/16"
(379mm)
FINISHED FLOOR
3/8"
(10mm)
32-1/16" (814mm)
31-1/2" [800mm]
FINISHED FLOOR
TO RIM HEIGHT)
FOR WCLWO1923OSDSACMC
STOP VALVES,
FITTINGS &
3/8" (10mm)
SUPPLY LINES
(NOT SUPPLIED)
FOR WCLWO1923OSDSACTMC
LK723
THERMOSTATIC
MIXING VALVE
TEMP .
ADJUST
LK724 – MANUAL
MIXING VALVE
TEMP .
ADJUST
COMPRESSION TO SWEAT
ADAPTER 3/8" (10mm) x 1/2" (13mm)
(3-REQ’D) & 1/2" (13mm) SUPPLY
TUBE (NOT SUPPLIED)
90 DEGREE ST. EL.
(2 REQ’D) NOT SUPPLIED
STOP VALVES, FITTINGS
& 3/8" (10mm) SUPPLY LINES
(NOT SUPPLIED)
Elkay Manufacturing Company
3-56A (Rev. 4/10)
11.61 ±.13
295mm ±3
7.32 ±.13
186mm ±3
.563
14mm
5.65 ±.13
143mm ±3
Printed in U.S.A.
©2010 Elkay Mfg. Co.
NOTE:
USE TEFLON TAPE FOR
ALL WATER CONNECTIONS.
DO NOT USE PIPE DOPE.
2222 Camden Court
Oak Brook, IL 60523
23.50 ±.25
597mm ±6
B