Elkay VRCTLR8WS, VRCTLRDDWS User Manual

Vandal-Resistant EZH2O® Bottle Filling Station
SPECIFICATIONS
with Bi-Level Reverse Vandal-Resistant Cooler
Models VRCTLR8WS & VRCTLRDDWS
PRODUCT SPECIFICATION
Unit shall include bi-level reverse electric water cooler with bottle lling station. VRCTLR8WS shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water. VRCTLRDDWS shall deliver non-chilled drinking water. Units shall be stainless steel construction and include vandal-resistant pushbutton activation. Cooler shall include vandal-resistant bubbler. Bottle lling unit shall include an automatic 20-second shut-off timer. Shall include Green Ticker™ displaying count of plastic bottles saved from waste. Bottle ller shall provide 1.1 - 1.5 gpm ow rate with laminar ow to minimizes splashing. Unit shall meet ADA guidelines. Unit shall be lead free design which is certied to NSF/ANSI 61 and 372 and meets federal and state low-lead requirements. Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.
STANDARD FEATURES
Vandal-resistant pushbutton activation
• Automatic 20-second shut-off on Bottle Filler
• Quick Fill Rate: 1.1 gpm (VRCTLR8WS); 1.5 gpm (VRCTLRDDWS)
• Laminar Flow provides minimal splash
• Real Drain System eliminates standing water
• Visual User Interface display includes:
• Innovative Green Ticker™
COOLING SYSTEM (Models VRCTLR8WS only)
• Compressor: Hermetically sealed, reciprocating type, single phase. Sealed-in lifetime lubrication.
• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is permanently lubricated.
• Cooling unit: Combination tube-tank type. Self-cleansing. Continuous copper tubing with stainless steel tank. Fully insulated with EPS foam which meets UL requirements for self-extinguishing material.
• Refrigerant Control: Refrigerant R134a is controlled by accurately calibrated capillary tube.
• Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
RATED FOR INDOOR AND OUTDOOR USE
Models VRCTLR8WSK
or VRCTLRDDWSK
CONSTRUCTION
• Stainless steel basin with integral drain
• Galvanized structural steel cooler chassis provides structural integrity
• Stainless steel construction bottle ller
Cooler cabinet is stainless steel construction
• Vandal-resistant bubbler is one-piece, heavy-duty
chrome-plated
WARRANTY
5 Year limited warranty on the unit’s refrigeration system. Electrical components and water system are warranted for 12 months from date of installation or 18 months from factory shipment, whichever date falls rst.
CAPACITIES CHART
Model
VRCTLR8WSK 115V / 60Hz 8 GPH 5.0 370 88
VRCTLR8WS2K 220V / 50Hz 6.7 GPH 2.5 370 88 ++
VRCTLR8WS3K 220V / 60Hz 8 GPH 2.5 370 88 ++
VRCTLRDDWSK 115V / 60Hz - 1.0 15 58
VRCTLRDDWS2K 220V / 50Hz - 0.5 15 58 ++
VRCTLRDDWS3K 220V / 60Hz - 0.5 15 58 ++
**Based on 80°F inlet water and 90°F ambient air temp for 50°F chilled drinking water. ++Complies; not third party certied
In keeping with our policy of continuing product improvement, Elkay reserves the right to change specication without notice. Please visit elkay.com for the most current version.
Voltage /
Hertz
Chilling
Capacity**
F.L. Amps
Rated Watts
2222 Camden Court Oak Brook, IL 60523
630-572-3192
Approx.
Shipping
Wt. (lb)
elkay.com
UL399 and
CAN/CSA
22.2 No. 120 Certied
This specication describes an Elkay product with design, quality and functional benets to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
ADA
Compliant
ANSI/NSF
61 & 372
Certied
GreenSpec®
Listed
© 2014 Elkay
SPEC14-80 (10/2014)
Vandal-Resistant EZH2O® Bottle Filling Station with Bi-Level Reverse Vandal-Resistant Cooler Models VRCTLR8WS & VRCTLRDDWS
IMPORTANT! INSTALLER PLEASE NOTE:
These units are designed and built to provide water to the user which has not been altered by materials in the cooler waterway. The grounding of electrical equipment such as telephone, computers, etc. to water lines is a common procedure. This grounding may be in the building buy may also occur away from the building. This grounding can cause electrical feedback into a water cooler creating an electrolysis which results in a metallic taste or an increase in the metal content of the water. This condition is avoidable by installing the cooler using the proper materials as shown.
16-5/16" 414mm
49-1/2" 1257mm
18-1/2" 470mm
31" 787mm
6-1/2" 165mm
18-3/4" 476mm
7-1/4" 185mm
13-7/8" 352mm
1-1/4" 32mm
E B
F
2-9/16" 65mm
7" 178mm
4-9/16" 116mm
6-1/4" 159mm
1-1/4" 32mm
C
L
11/16" 18mm
7" 178mm
18-1/16" 459mm
5"
127mm
1-3/8" 35mm
5-3/4" 146mm
D
C
L
10" 254mm
2-7/16" 63mm
3-1/2" 89mm
4-1/2" 114mm
1-3/8" 35mm
5-3/4" 146mm
20-3/8" 518mm
ROUGH-IN DIMENSIONS
RATED FOR INDOOR AND OUTDOOR USE
NOTICE:
This water cooler must be connected to the water supply using a dielectric coupling. The cooler is furnished with a non-metallic strainer which meets this requirement. The drain trap which is provided by the installer should also be plastic to completely isolate the cooler from the building plumbing system.
E
A
F
26-11/16" 678mm
31-11/16"
805mm
51-1/8"
1298mm
48" 1219mm
39-9/16" 1005mm
ORIFICE HEIGHT
ORIFICE
33-1/16" 840mm
HEIGHT
RIM HEIGHT
2-5/8" 66mm
*
31-15/16"
811mm
8"
204mm
27"
ADA
686mm
REQUIREMENT
C
4-1/8" 105mm
12-5/16" 313mm
18-9/16" 472mm
5-1/8" 131mm
6-3/4" 172mm
FINISHED FLOOR
REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDREN’S ADA COOLER
LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept 3/8” O.D. unplated copper tube. Up to 3” (38mm) maximum out from wall. B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain. Drain stub 2” (51mm) out from wall. C = 1-1/2” Trap (not furnished). D = Electrical Supply (3) Wire Recessed Box Duplex Outlet. E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet louvers to wall. F = 7/16” (11mm) Bolt Holes for fastening to wall. NOTE: Installations Must Use Ground Fault Circuit Interrupter. (GFCI)
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes:
Printed in U.S.A.
© 2014 Elkay
Loading...