Elkay VRCTLR8SC Specifications

®



SPECIFICATIONS

G

ENERAL

Self-contained, double wall hung electric refrigerated, water

cooler. Vandal-resistant unit for use in high demand locations

where vandalism may occur. Rated for indoor or outdoor use.

Stainless steel construction provides vandal-resistant

enclosure. Optional perforated stainless steel louver screen-

ing prevents objects from being inserted into cooler.

Flow regulators provide constant stream from 20 to 150 psi

water pressure. Heavy duty push button control is vandal-

resistant.

ADA COMPLIANT

T

hese Water Coolers comply with the requirements of A.D.A.

(

Americans with Disabilities Act) when properly installed. Also

meets the guidelines for children’s environments providing

the floor to orifice height is 30" or less and proper clear floor

space is provided for parallel approach. (Based on

Architectural and Transportation Barriers Compliance Board

final ruling.) Check Local and State Codes.

NO LEAD DESIGN

These Water Coolers are certified to be lead-free as defined

by the Safe Drinking Water Act. Elkay Water Coolers are man-

ufactured with a waterway system utilizing copper compo-

nents and completely lead-free materials. These waterways

have no lead because all lead materials, such as leaded

brass, have been removed. All joints are brazed using silver

solder only. No lead solder is permitted. A strainer with an

easily cleanable screen is provided to allow trapping and con-

venient removal of waterborne particulate of 140 microns and

larger prior to their entry into the water cooler.

COOLING SYSTEM

Motor Compressor:Hermetically sealed, reciprocating type,

120 Volt/60 Hz, single phase or 220-240 Volt/50 Hz or 60 Hz,

two phase. Sealed-in lifetime oil supply. Equipped with elec-

tric cord and three prong molded rubber plug.

Condenser:Fan cooled, copper tube with aluminum fins. Fan

motor is permanently lubricated.

Cooling Unit:Combination tube-tank type. Tube portion is

continuous coil of copper tubing. Fully insulated with EPS

foam which meets Underwriters Laboratories Inc. require-

ments for self extinguishing material.

CAPACITIES CHART

**Based on 80°F (27°C) inlet water temperature.

Rated watts shown are based on operational (run) time, in accordance with A.R.I.

Standard 1010 conditions. Specific applications will determine the actual watts

consumed per hour. Watts consumed will be based on number of people

served per hour (usage), ambient temperatures, and inlet water temperature.

Refrigerant Control:Refrigerant HFC-134a is controlled by

accurately calibrated capillary tube for positively trouble-free

operation.

Temperature Control:Enclosed adjustable thermostat is

factory preset. Requires no adjustment other than for altitude

requirements. Easily accessible.

CONSTRUCTION

Frame:Galvanized structural steel chassis supports fountain

top and cabinet panels.

Fountain Top:Series 300 one piece stainless steel top,

polished to a uniform Elkay bright luster finish. Basin has

embossed bubbler pad.

Vandal-Resistant Bubbler:Heavy duty, one piece construc-

tion. Keyed into position to prevent rotation. Meets UL

requirements and all sanitary codes.

Cabinet:Cabinet design allows for flush to wall mounting. No

recess space is required. Includes bottom cover plate

fastened with vandal-resistant screws.

Color Selection:Stainless steel furnished as standard.

ALSO AVAILABLE

MODEL VRCSCTLR8SC:Same as VRCTLR8SC model with

perforated stainless steel louvers screening prevents objects

from being inserted into coolers.

Elkay Pressure-Type Water Coolers are designed to operate

on 20 psi (138 KPa) to 105 psi (724 KPa) supply line pressure.

If inlet pressure is above 105 psi (724 KPa), a pressure

regulator must be installed in the supply line. Any damage

caused by reason of connecting this product to supply line

pressures lower than 20 psi (138 KPa) or higher than 105 psi

(724 KPa) is not covered by the warranty.

STANDARDS

Model VRCTLR8SC

**GPH of 50°F

Drinking Water

Ship.

Room Temperature °F

FullGlassWt.

ModelVolt./Base70°F80°F90°FRatedLoadFillerFilterLouverLbs.

NumberHertzRate(21°C)(27°C)(32°C)WattsAmpsOptionOptionScreens(Kg.)

VRCTLR8SC

120V/

7.89.48.67.85755NoYesYes94

60Hz

220-

VRCTLR8S2JOC240V/6.57.97.26.55752.5NoYesYes94

50Hz

220-

VRCTLR8S3JOC240V/7.59.48.67.85752.5NoYesYes94

60Hz

VRCTLRDDSC–––––––

NoYesYes56

G

ENERAL

Self-contained, double wall hung electric refrigerated, water

cooler. Vandal-resistant unit for use in high demand locations
where vandalism may occur. Rated for indoor or outdoor use.

Stainless steel construction provides vandal-resistant
enclosure. Optional perforated stainless steel louver screen­ing prevents objects from being inserted into cooler.
Flow regulators provide constant stream from 20 to 150 psi
water pressure. Heavy duty push button control is vandal­resistant.

ADA COMPLIANT

T

hese Water Coolers comply with the requirements of A.D.A.

(

Americans with Disabilities Act) when properly installed. Also
meets the guidelines for children’s environments providing
the floor to orifice height is 30" or less and proper clear floor
space is provided for parallel approach. (Based on
Architectural and Transportation Barriers Compliance Board
final ruling.) Check Local and State Codes.

NO LEAD DESIGN

These Water Coolers are certified to be lead-free as defined

by the Safe Drinking Water Act. Elkay Water Coolers are man­ufactured with a waterway system utilizing copper compo­nents and completely lead-free materials. These waterways
have no lead because all lead materials, such as leaded
brass, have been removed. All joints are brazed using silver
solder only. No lead solder is permitted. A strainer with an
easily cleanable screen is provided to allow trapping and con­venient removal of waterborne particulate of 140 microns and
larger prior to their entry into the water cooler.

COOLING SYSTEM

Motor Compressor: Hermetically sealed, reciprocating type,

120 Volt/60 Hz, single phase or 220-240 Volt/50 Hz or 60 Hz,
two phase. Sealed-in lifetime oil supply. Equipped with elec­tric cord and three prong molded rubber plug.

Condenser: Fan cooled, copper tube with aluminum fins. Fan

motor is permanently lubricated.

Cooling Unit: Combination tube-tank type. Tube portion is

continuous coil of copper tubing. Fully insulated with EPS
foam which meets Underwriters Laboratories Inc. require­ments for self extinguishing material.

CAPACITIES CHART

**Based on 80°F (27°C) inlet water temperature.

Rated watts shown are based on operational (run) time, in accordance with A.R.I.
Standard 1010 conditions. Specific app lications will determine the actual watts
consumed per hour. Watts consumed will be based on number of people
served per hour (usage), ambient temperatures, and inlet water temperature.

Refrigerant Control: Refrigerant HFC-134a is controlled by

accurately calibrated capillary tube for positively trouble-free
operation.

Temperature Control: Enclosed adjustable thermostat is

factory preset. Requires no adjustment other than for altitude
requirements. Easily accessible.

CONSTRUCTION

Frame: Galvanized structural steel chassis supports fountain

top and cabinet panels.

Fountain Top: Series 300 one piece stainless steel top,

polished to a uniform Elkay bright luster finish. Basin has
embossed bubbler pad.

Vandal-Resistant Bubbler: Heavy duty, one piece construc-

tion. Keyed into position to prevent rotation. Meets UL
requirements and all sanitary codes.

Cabinet: Cabinet design allows for flush to wall mounting. No

recess space is required. Includes bottom cover plate
fastened with vandal-resistant screws.

Color Selection: Stainless steel furnished as standard.

ALSO AVA ILABL E

MODEL VRCSCTLR8SC: Same as VRCTLR8SC model with

perforated stainless steel louvers screening prevents objects
from being inserted into coolers.

Elkay Pressure-Type Water Coolers are designed to operate
on 20 psi (138 KPa) to 105 psi (724 KPa) supply line pressure.
If inlet pressure is above 105 psi (724 KPa), a pressure
regulator must be installed in the supply line. Any damage
caused by reason of connecting this product to supply line
pressures lower than 20 psi (138 KPa) or higher than 105 psi
(724 KPa) is not covered by the warranty.

STANDARDS

Model VRCTLR8SC

**GPH of 50°F

Drinking Water

Ship.

Room Temperature °F

Full GlassWt.

Model Volt./ Base 70°F 80°F90°FRatedLoadFiller FilterLouverLbs.

Number Hertz Rate (21°C)(27°C)(32°C) Watts AmpsOptionOption Screens (Kg.)

VRCTLR8SC

120V/

7.8 9.4 8.6 7.8 5755 NoYesYes 94

60Hz
220-

VRCTLR8S2JOC 240V/ 6.5 7.9 7.2 6.5 575 2.5 No Yes Yes 94

50Hz
220-

VRCTLR8S3JOC 240V/ 7.5 9.4 8.6 7.8 575 2.5 No Yes Yes 94

60Hz

VRCTLRDDSC – – – – – ––

No Yes Yes 56

In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay

product specification sheets.

Elkay

elkayusa.com

2 Station Wall-Mount Water Cooler

Vandal-Resistant, Barrier Free Access

Models VRCTLR8SC

2222 Camden Court
Oak Brook, IL 60523

Protected by Elkay’s 5 Year Limited Warranty on the refrig­eration system of the unit.

Elkay Electric Air Cooled Water Coolers are listed
by Underwriters Laboratories Inc. and comply with
both Canadian and U.S. requirements.

These units comply with A.R.I. Standard 1010.

This cooler is certified by WQA to lead-free compliance including
NSF/ANSI 61-ANNEX G, AB 1953.

This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.

Printed in U.S.A.
©2011 Elkay

(Rev. 4/11) 12-58A

2 Station Wall-Mount Water Cooler

®



NOTE: WATERFLOW

DIRECTION

SERVICE STOP

(NOT FURNISHED)

3

/8" O.D. TUBE CONNECT

C

OLD WATER SUPPLY
1

/4" O.D. TUBE

W

ATER INLET

T

O COOLER

BUILDING WATER

INLET

NOTE: WATERFLOW

DIRECTION

SERVICE STOP
(NOT FURNISHED)

3

/8" O.D. TUBE CONNECT

C

OLD WATER SUPPLY

1

/4" O.D. TUBE

W

ATER INLET

T

O COOLER

BUILDING WATER

INLET

REDUCE HEIGHT BY 3" FOR INSTALLATION OF CHILDREN'S ADA COOLER

LEGEND

A = RECOMMENDED WATER SUPPLY LOCATION. SHUT OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D. UNPLATED COPPER TUBE.

3" (76mm) MAXIMUM OUT FROM WALL.

B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/4" O.D. DRAIN.

C = 1-1/4" TRAP NOT FURNISHED

D = ELECTRICAL SUPPLY (3) WIRE RECESSED BOX.

E = INSURE PROPER VENTILATION BY MAINTAINING 6" (152mm) (MIN.) CLEARANCE FROM CABINET LOUVERS TO WALL.

F = 5/16" BOLT HOLES FOR FASTENING UNIT TO WALL.

*ADA REQUIREMENT

REDUCE HEIGHT BY 3" FOR INSTALLATION OF CHILDREN'S ADA COOLER

LEGEND
A = RECOMMENDED WATER SUPPLY LOCATION. SHUT OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D. UNPLATED COPPER TUBE.
3" (76mm) MAXIMUM OUT FROM WALL.
B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/4" O.D. DRAIN.
C = 1-1/4" TRAP NOT FURNISHED
D = ELECTRICAL SUPPLY (3) WIRE RECESSED BOX.
E = INSURE PROPER VENTILATION BY MAINTAINING 6" (152mm) (MIN.) CLEARANCE FROM CABINET LOUVERS TO WALL.
F = 5/16" BOLT HOLES FOR FASTENING UNIT TO WALL.
*ADA REQUIREMENT

OPERATION OF QUICK CONNECT FITTINGS

S

IMPLY PUSH IN

TUBE TO ATTACH
T

UBE IS SECURED

IN POSITION

P

USH IN COLLET

TO RELEASE TUBE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

R

ELEASE TUBE

AB

C

OPERATION OF QUICK CONNECT FITTINGS

S

IMPLY PUSH IN

TUBE TO ATTACH

T

UBE IS SECURED

IN POSITION

P

USH IN COLLET

TO RELEASE TUBE

PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO

R

ELEASE TUBE

AB

C

13 7/8"

352mm

18 3/4"

476mm

37 1/2"

952mm

6 1/2"

166mm

20 3/8"

518mm

26 11/16"

677mm

31 11/16"

804mm

3 1/2"

89mm

4 1/2"

114mm

5"

127mm
10"

254mm

5

3/4"

146mm
5

3/4"

146mm

1 3/8"

35mm
1 3/8"

35mm

18 1/16"

4

59mm

5 3/4"

146mm
5 3/4"

146mm

1 3/8"

35mm
1 3/8"

35mm

5"

128mm

2 7/16"

63mm

1 1/2"

38mm

18 5/8"

474mm

2 5/8"

67mm

8"

203mm

4 3/4"

121mm

12 5/16"

312mm

27"

686mm

31 7/8"

810mm

32 15/16"

837mm

39 1/2"

1003mm

H

ANGER BRACKET

FIJADOR DE SUSPENSION

SUPPORT DE SUSPENSION

ORIFICE

HEIGHT

ALTURA DEL

ORIFICIO

HAUTEUR DE

L'ORIFICE

ORIFICE

HEIGHT

ALTURA DEL

ORIFICIO

HAUTEUR DE

L'ORIFICE

RIM HEIGHT

ALTURA DEL

ORIFICIO

HAUTEUR DE

L 'ORIFICE

*

B

D

E

E

F

F

A

C

FINISHED FLOOR

PISO ACABADO

PLANCHER FINI

5/16" (8mm) DIA. (10 HOLES)

8mm (10 AGUJEROS)

8mm (10 TROUS)

6 3/4"

173mm

13 7/8"
352mm

18 3/4"
476mm

37 1/2"
952mm

6 1/2"
166mm

20 3/8"
518mm

26 11/16"
677mm

31 11/16"
804mm

3 1/2"
89mm

4 1/2"
114mm

5"
127mm

10"
254mm

5

3/4"

146mm

5

3/4"

146mm

1 3/8"
35mm

1 3/8"
35mm

18 1/16"
4

59mm

5 3/4"
146mm

5 3/4"
146mm

1 3/8"
35mm

1 3/8"
35mm

5"
128mm

2 7/16"
63mm

1 1/2"
38mm

18 5/8"
474mm

2 5/8"
67mm

8"
203mm

4 3/4"
121mm

12 5/16"
312mm

27"
686mm

31 7/8"
810mm

32 15/16"
837m m

39 1/2"
1003mm

H

ANGER BRACKET

FIJADOR DE SUSPENSION

SUPPORT DE SUSPENSION

ORIFICE
HEIGHT

ALTURA DEL

ORIFICIO

HAUTEUR DE

L'ORIFIC E

ORIFICE
HEIGHT

ALTURA DEL

ORIFICIO

HAUTEUR DE

L'ORIFICE

RIM HEIGHT

ALTURA DEL

ORIFICIO

HAUTEUR DE

L 'ORIFICE

*

B

D

E

E

F

F

A

C

FINISHED FLOOR
PISO ACABADO
PLANCHER FINI

5/16" (8mm) DIA. (10 HOLES)
8mm (10 AGUJEROS)
8mm (10 TROUS)

6 3/4"
173mm

Vandal-Resistant, Barrier Free Access
Models VRCTLR8SC

ROUGH-IN DIMENSIONS

MPORTANT!

I

NSTALLER PLEASE NOTE:

his water cooler has been designed and built to provide water to the user which

T

as not been altered by materials in the cooler waterways. The grounding of elec-

h

rical equipment such as telephone, computers, etc., to water lines is a common

t

rocedure. This grounding may be in the building but may also occur away from

p

he building. This grounding can cause electrical feedback into a water cooler

t

reating an electrolysis which creates a metallic taste or causes an increase in the

c

etal content of the water. This condition is avoidable by installing the cooler using

m

he proper materials as shown below.

t

his water cooler must be connected to the water supply using a dielectric

T

oupling. The cooler is furnished with a non-metallic strainer which meets this

c

equirement. The drain trap which is provided by the installer should also be plastic

r

o completely isolate the cooler from the building plumbing system.

t
Minimum 40 psi supply line pressure required in special circumstances when both

sides of bilevel are in use simultaneously to ensure adequate stream height. Does
not apply to non-refrigerated units.

I

OTICE

N

Elkay

12-58A (Rev. 4/11)

2222 Camden Court
Oak Brook, IL 60523

elkayusa.com

Printed in U.S.A.
©2011 Elkay