Elkay VRCGRNTL8WSK User Manual

EZH2O® Bottle Filling Station

with Bi-Level High-Efciency Cooler

SPECIFICATIONS

PRODUCT SPECIFICATION

Unit shall include high-efciency bi-level electric water cooler with
bottle lling station. VRCGRNTL8WSK shall deliver 8 GPH of 50°F
drinking water at 90°F ambient and 80°F inlet water. Lower units
shall have Vandal-resistant pushbutton activation with Vandal-resistant
StreamSaver™ water conservation bubbler. Bottle lling unit shall include an
electronic sensor for touchless activation with auto 20-second shut-off timer.
Shall include Green Ticker™ displaying count of plastic bottles saved from
waste. Bottle ller shall provide 1.1 gpm ow rate with laminar ow to minimize
splashing. Shall include integrated silver ion anti-microbial protection in key
areas. Unit shall meet ADA guidelines. Unit shall be lead-free design which
is certied to NSF/ANSI 61 and 372 and meets Federal and State low-lead
requirements. Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.

STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)

• Vandal-resistant, easy to operate front pushbutton control (Cooler)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• Cooler panel nish: Stainless Steel

Model VRCGRNTL8WSK

RATED FOR INDOOR USE ONLY

Model

VRCGRNTL8WSK

COOLING SYSTEM

• High Efciency Compressor: hermetically-sealed, reciprocating type,
single phase.
Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is
permanently lubricated.

• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS foam
which meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat
is factory preset. Requires no adjustment other than for altitude

requirements.

CAPACITIES CHART

Model

VRCGRNTL8WSK 115V / 60Hz 8 GPH 3.8 260 112

**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.

Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12 months
from date of installation or 18 months from factory shipment, whichever
date falls rst.

Voltage /

Hertz

Chilling**

Capacity

F.L.

Amps

Rated
Watts

Approx.

Ship

Wt.

CONSTRUCTION

• Stainless Steel basin with integral drain

• Galvanized structural steel cooler chassis provides

structural integrity

• Stainless steel bottle ller wrapper with ABS plastic alcove

• Cooler cabinet is Stainless Steel construction

• Vandal-resistant StreamSaver™ water-efcient bubbler is
one-piece heavy-duty chrome-plated

CERTIFICATIONS / STANDARDS

• ADA Compliant

• UL399 and CAN/CSA 22.2 No. 120 Certied
ANSI/NSF 61 and 372 Certied

• GreenSpec® Listed

This specication describes an Elkay product with design,
quality and functional benets to the user. When making a
comparison of other producer’s offerings, be certain these
features are not overlooked.

In keeping with our policy of continuing product
improvement, Elkay reserves the right to change
specication without notice. Please visit elkaypro.com
for the most current version.

2222 Camden Court
OakBrook, IL 60523

630-572-3192

elkay.com

© 2014 Elkay

SPEC14-75 (09/2014)

EZH2O® Bottle Filling Station

with Bi-Level High-Efciency Cooler
Model VRCGRNTL8WSK

ROUGH-IN

1/4” O.D. TUBE

WATER INLET

TO COOLER

OPERATION OF QUICK CONNECT FITTINGS

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE TO ATTACH

A B C

7/16"

O

11mm

MOUNTING HOLES

(6)

ACTIVATION
SENSOR

381mm

5/16" (8mm) DIA.

6 1/2"

165mm

58 9/16"

1488mm

7 1/4"

37 1/2"

952mm

185mm

20 3/8"
518mm

45 9/16"
1157mm

3/8” O.D. TUBE CONNECT

COLD WATER SUPPLY

NOTE: WATERFLOW

5 3/4"

146mm

15"

(10 HOLES)

1 3/8"

35mm

E

F

2 9/16"
65mm

DIRECTION

TUBE IS SECURED

TUBE IS SECURED

IN POSITION

B CA

178mm

4 9/16"
116mm

5"

127mm

IN POSITION

17 7/8"

454mm

7"

C

L

FINISHED FLOOR

BUILDING WATER

SERVICE STOP

(NOT FURNISHED)

PUSH IN COLLET

PUSH IN COLLET

TO RELEASE TUBE

TO RELEASE TUBE

PUSHING TUBE IN BEFORE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

PULLING IT OUT HELPS TO

RELEASE TUBE

RELEASE TUBE

7"

178mm

1 3/8"
35mm

11/16"
18mm

2 7/16"
63mm

10"

254mm

B

INLET

5 3/4"

146mm

18 1/16"

459mm

5 3/4"

146mm

1 3/8"

35mm

6 1/4"

159mm

C

L

1 3/8"

35mm

3 1/2"

89mm

4 1/2"

114mm

RATED FOR INDOOR USE ONLY

IMPORTANT! INSTALLER PLEASE NOTE:

These units are designed and built to provide water to the user which has not
been altered by materials in the cooler waterway. The grounding of electrical
equipment such as telephone, computers, etc. to water lines is a common
procedure. This grounding may be in the building but may also occur away from
the building. This grounding can cause electrical feedback into a water cooler
creating an electrolysis which results in a metallic taste or an increase in the
metal content of the water. This condition is avoidable by installing the cooler
using the proper materials as shown.

NOTICE

This water cooler must be connected to the water supply using a dielectric
coupling. The cooler is furnished with a non- metallic strainer which meets this
requirement. The drain trap which is provided by the installer should also be
plastic to completely isolate the cooler from the building plumbing system.

Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown).
Water and electrical will connect through pre-punched hole in basin.

3 9/16"
90mm

18 5/8"

472mm

5 3/4"

146mm

13 7/8"

352mm

D

E

A

F

18 3/4"

476mm

20 1/8"
511mm

25 1/8"

638mm

39 7/16"

1002mm

ORIFICE HEIGHT

ORIFICE HEIGHT

32 15/16"

837mm

2 5/8"
67mm

31 15/16"

811mm

RIM HEIGHT

27"

686mm

ADA

REQUIREMENT

8"

203mm

105mm

HANGER BRACKET

C

4 1/8"

12 5/16"
313mm

6 3/4"

172mm

18 7/8"

479mm

REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/2” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet

Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes:

louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

2222 Camden Court
Oak Brook, IL 60523

Printed in U.S.A.

© 2014 Elkay

elkay.com