Elkay VRC8WS, VRCDWS User Manual

Vandal-Resistant EZH2O® Bottle Filling Station

SPECIFICATIONS

PRODUCT SPECIFICATION

Unit shall include electric water cooler with bottle lling station. VRC8WS shall

deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water. VRCDWS shall deliver non-chilled drinking water. Units shall be stainless steel construction and include vandal-resistant pushbutton activation. Cooler shall

include vandal-resistant bubbler. Bottle lling unit shall include a 20-second

automatic shut-off timer. Shall include Green Ticker™ displaying count of plastic

bottles saved from waste. Bottle ller shall provide 1.1 - 1.5 gpm ow rate with laminar ow to minimize splashing. Unit shall meet ADA guidelines. Unit shall be lead-free design which is certied to NSF/ANSI 61 & 372 and meets Federal and State low-lead requirements. Unit shall be certied to UL399 and CAN/CSA 22.2

No. 120.

STANDARD FEATURES

• Vandal-resistant pushbutton activation

• Automatic 20-second shut-off

• Quick Fill Rate: 1.1 gpm (VRC8WS); 1.5 gpm (VRCDWS)

• Laminar ow provides minimal splash

• Real Drain System eliminates standing water

• Visual user interface includes:

• Innovative Green Ticker™ counts bottles saved from waste

• Includes Vandal-resistant bubbler

• Cooler panel nish: Stainless Steel

COOLING SYSTEM (Models VRC8WS only)

• Compressor: Hermetically sealed, reciprocating type, single phase. Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is

permanently lubricated.

• Cooling unit: Combination tube-tank type. Self-cleansing. Continuous copper tubing with stainless steel tank. Fully insulated with EPS foam which meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.

with Single Vandal-Resistant Cooler

Models VRC8WS & VRCDWS

RATED FOR INDOOR AND OUTDOOR USE

Models VRC8WSK or VRCDWSK

CONSTRUCTION

• Stainless steel basin with integral drain

• Galvanized structural steel cooler chassis provides structural

integrity

• Stainless steel construction bottle ller

• Cooler cabinet is stainless steel construction

• Vandal-resistant bubbler is one-piece, heavy-duty chrome-plated

WARRANTY

5 Year limited warranty on the unit’s refrigeration system. Electrical components and water system are warranted for 12 months from date of installation or 18 months from factory shipment, whichever

date falls rst.

CAPACITIES CHART

Model

VRC8WSK 115V / 60Hz 8 GPH 5.0 370 88 • • • •

VRC8WS2K 220V / 50Hz 6.7 GPH 2.5 370 88 ++ • • •

VRC8WS3K 220V / 60Hz 8 GPH 2.5 370 88 ++ • • •

VRCDWSK 115V / 60Hz - 1.0 15 58 • • • •

VRCDWS2K 220V / 50Hz - 0.5 15 58 ++ • • •

VRCDWS3K 220V / 60Hz - 0.5 15 58 ++ • • •

**Based on 80°F inlet water and 90°F ambient air temp for 50°F chilled drinking water. ++Complies; not third party certied.

In keeping with our policy of continuing product improvement, Elkay reserves the right to change specication without notice. Please visit elkay.com for the most current version.

Voltage /

Hertz

Chilling

Capacity**

F.L. Amps

Rated Watts

2222 Camden Court Oak Brook, IL 60523

630-572-3192

elkay.com

Approx.

Shipping

Wt. (lb)

UL399 and

CAN/CSA

22.2 No. 120

Certied

This specication describes an Elkay product with design, quality and functional benets to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

ADA

Compliant

ANSI/NSF

61 & 372

Certied

SPEC14-78 (10/2014)

GreenSpec®

Listed

Vandal-Resistant EZH20® Bottle Filling Station with Single Vandal-Resistant Cooler Models VRC8WS & VRCDWS

IMPORTANT! INSTALLER PLEASE NOTE:

These units are designed and built to provide water to the user which has not been altered by materials in the cooler waterway. The grounding of electrical equipment such as telephone, computers, etc. to water lines is a common procedure. This grounding may be in the building buy may also occur away from the building. This grounding can cause electrical feedback into a water cooler creating an electrolysis which results in a metallic taste or an increase in the metal content of the water. This condition is avoidable by installing the cooler using the proper materials as shown.

16 5/16

414mm

5/16

MOUNTING HOLES

8mm (3 PL)

1/4" X 1/2" (6mm X 13mm) OBROUND HOLE (5 PL)

178mm

32mm

1 1/4

178mm

1 1/4

32mm

18 1/2

470mm

ROUGH-IN DIMENSIONS

RATED FOR INDOOR AND OUTDOOR USE

NOTICE:

This water cooler must be connected to the water supply using a dielectric coupling. The cooler is furnished with a non-metallic strainer which meets this requirement. The drain trap which is provided by the installer should also be plastic to completely isolate the cooler from the building plumbing system.

18 5/8

472mm

51 1/8

1298mm

1219mm

2 5/8

66mm

HANGER BRACKET

5 1/8

131mm

4 9/16

116mm

49 1/2

1257mm

788mm

635mm

21 3/8

543mm

18 3/8

467mm

127mm

FINISHED FLOOR

2 7/16

63mm

3 1/2

89mm

114mm

254mm

18mm

2 1/2

64mm

4 1/2

3/4

REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDREN’S ADA COOLER

LEGEND:

A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept 3/8” O.D. unplated copper tube. Up to 3” (38mm) maximum out from wall. B = Recommended Waste Outlet location. To accommodate 1-1/4” nominal drain. Drain stub 2” (51mm) out from wall. C = 1-1/4” Trap (not furnished). D = Electrical Supply (3) Wire Recessed Box Duplex Outlet. E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet louvers to wall. F = 7/16” (11mm) Bolt Holes for fastening to wall. NOTE: Installations Must Use Ground Fault Circuit Interrupter. (GFCI)

7 1/4

185mm

2 9/16

65mm

13 7/8

352mm

33 1/16

840mm

ORIFICE HEIGHT

31 15/16

811mm

RIM HEIGHT

REQUIREMENT

686mm

ADA

12 5/16 313mm

203mm

FINISHED FLOOR

1 1/2

38mm

159mm

6 3/4

171mm

6 1/4

Job Name: ____________________________________

Model: _______________________ Qty. ____________

Contact: ______________________________________

Approval Signature: _____________________________

Notes:

2222 Camden Court Oak Brook, IL 60523

630-572-3192

elkay.com

Printed in U.S.A.