Elkay S4819R User Manual
Gourmet®Sink Tops – Single Bowl
®
C
20-1/2" (521mm)
A
F
E
D
B
1-3/8" (35mm)
DIA. HOLES
1-3/4"
(44mm) R
1-3/4"
(44mm) R
1-3/4"
(44mm) R
1-3/4"
(44mm) R
4" (102mm) 4" (102mm)
4" (102mm)4" (102mm)
11" (279mm) 11" (279mm)
C
A
F
43-1/2" (1105mm)
4" (102mm)
E
D
B
5-1/2"
(140mm)
5-1/2"
(140mm)
3 FAUCET HOLE MODELS
4 FAUCET HOLE MODELS
Model S4819R3 Model S4819L3
Model S4819R4
Model S4819L4
WOOD
STRIP
5/32" (4mm)
7/16"
(11mm)
3/4"
(19mm)
1-1/2"
(38mm)
3/8" (10mm)
DETAIL OF RIM
S P EC IF IC AT I O N S
ENERAL
G
Highest quality sinktop formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Integral bowl, fan pitched
integral work area and backsplash. All exposed surfaces handblended to a lustrous satin finish. Designed for use with
standard size base cabinet and dishwasher sink base. (Custom
sizes are available by contacting an Elkay Representative.)
DESIGN FEATURES
Bowl Depth: 7-1/2" (191mm).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Sinktop Thickness: 1-1/2" (38mm).
Backsplash: 4" (102mm) high, full length, 1/4" (6mm) coved
corner.
utside edge of sinktop has a 5/32" (4mm) raised rim.
O
Drain Opening: 3-1/2" (89mm).
Underside is fully undercoated.
Wood mounting strips attached to underside for fastening top
to cabinet.
Stocked in three or four faucet holes only. Other hole drilling
locations are available made to order.
Suffix “L” (left) or “R” (right) denotes location of bowl.
These sinks comply with ASME A112.19.3.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
OPTIONAL ACCESSORIES
Cutting Boards: CB1713, CBS1316.
Drain: LK99.
Rinsing Baskets: LKWRB1418SS, LKWERBSS.
Utensil Caddy for Rinsing Basket: LKWUCSS.
SINK DIMENSIONS*
Overall Inside Each Bowl Work Area
Model
Number ABCDE FLocation Location 4" (102mm) Center Size
S481 9L 48 25 19 16 71⁄2 26 Right Rear Center 3 or 4 48
S481 9R 48 25 19 16 71⁄2 26 Left Rear Center 3 or 4 48
*Length is left to right. Width is front to back.
LWLWD L
(1219mm) (635mm) (483mm) (406mm) (191mm) (660mm) (1219mm)
(1219mm) (635mm) (483mm) (406mm) (191mm) (660mm) (1219mm)
Drain Faucet Holes Cabinet
Models S4819L and S4819R
M
odel S4819R3
M
1
No. of 1
/2" (38mm) Maximum
odel S4819L3
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Printed in U.S.A.
©2008 Elkay
(Rev. 11/08) 1-154A
Loading...