Elkay LZWSRK User Manual
E
A
SPECIFICATION
S
EZH2O® Bottle Filling Station
Filtered Retro-fit Model for EZ/LZ Coolers
Model LZWSRK
PRODUCT SPECIFICATION
Retrofit bottle filling station for 115V/60Hz EZ style pushbar-activated
models. Bottle filling unit shall include an electronic sensor for touchless
activation with auto 20-second shut-off timer. Shall include Green T icker™
displaying count of plastic bottles saved from waste. Bottle filler shall
provide 1.1-1.5 gpm flow rate with laminar flow to minimize splashing.
Shall include the WaterSentry
NSF/ANSI 42 and 53, with visual monitor to indicate when repl acement is
necessary. Shall include integrated silver ion anti-m icrobial protection in
key areas. Unit shall meet ADA guidelines. Unit shall be lead-free design
which is certified to NSF/ANSI 61 and 372 and meets Federa l and State
low-lead requirements. Unit shall be certified to UL399 and CAN/CSA
22.2 No. 120.
.
®
Plus 3000-gallon capacity filter, certified to
RATED FOR INDOOR USE ONLY
Model
LZWSRK
STANDARD FEATURES
Sanitary, touchless activation with auto 20-second shut-off
WaterSentry
NSF/ANSI 42 & 53 (Lead, Class 1 Particulate, Chlorine, Taste & Odor)
Integrated Silver Ion Anti-microbial Protection in key areas
Quick Fill Rate: 1.1 gpm when connected to refrigerated EZ models;
1.5 gpm for non-refrigerated connections
Laminar Flow provides minimal splash
Real Drain System eliminates standing water
Visual User Interface display includes:
Innovative Green Ticker™ counts bottles saved from waste.
LED Visual Filter Monitor shows when replacement is necessary
®
Plus 3000-gallon capacity Filtration System, certified to
For reference: shown
installed on
Z single cooler
CONSTRUCTION
Stainless steel bottle filler wrapper with ABS plastic alcove
Retrofits to most 115V/60Hz EZ style pushbar-activated models.
Not designed for retrofit to EZO / LZO sensor-activated coolers.
REPLACEMENT FILTERS
Order part numbers:
51300C (single)
51300C_3PK (three)
51300C_12PK (twelve)
51300C_24PK (twenty-four)
51300C_48PK (forty-eight)
CAPACITIES CHART
Model
LZWSRK
The above ratings apply only to the EZWSRK unit. Ratings for the cooler not included
In keeping with our policy of continuing product
improvement, Elkay reserves the right to change
specifications without notice. Please visit elkayusa.com
for the most current version.
Voltage /
Hertz
115V /
60Hz
: Available as Singles and Multi-packs.
Chilling Capacity
Based on Existing
Cooler Rating
F.L.
Amps
Rated
Watts
1.0 15 18
pprox
Ship
Wt.
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
Elkayusa.com
OPTIONAL ACCESSORY:
36292C Receptacle Adaptor Plug (115V
with three plug-in receptacles)
Filter Mounting Covers for existing
installations requiring filter mount below
cooler
o 98551C (Light Gray Granite)
o 98568C (Stainless Steel)
WARRANTY: Electrical components and water
system are warranted for 12 months from date of
installation or 18 months from factory shipment,
whichever date falls first.
CERTIFICATIONS / STANDARDS
ADA Compliant
UL399 and CAN/CSA 22.2 No. 120 Certified
ANSI/NSF 61 and 372 Certified
ANSI/NSF 42 and 53 Certified
GreenSpec® Listed
This specification describes an Elkay product with design,
quality and functional benefits to the user. When making a
comparison of other producer’s offerings, be certain these
features are not overlooked.
(Filter only)
14-56C
© 2013 Elkay
(Rev 02/2013)
EZH2O® Bottle Filling Station
Filtered Retro-fit Model for EZ/LZ Coolers
Model LZWSRK
ROUGH-IN
SINGLE COOLER RETRO-FIT
7
178mm
17 7/8
454mm
7
178mm
7/16
O
11mm
MOUNTING HOLES
(6)
15
381mm
ELECTRICAL
EZH2O equipped with electrical cord and three-prong
molded rubber plug for use with 15-amp minimum
receptacle. Rated at 115V/60Hz, single phase.
3 9/16
90mm
.
7
178mm
18 13/16
478mm
*Rated for indoor use only
IMPORTANT!
EZH2O Retro-fit is designed fo fit on an existing EZ
style cooler which is properly installed per the EZ
Spec Sheet rough-in information.
INSTALLATION NOTES:
Unit will mount on bracket attached to wall as
•
indicated by six holes shown.
Water and electrical will route through hole punched
•
into basin. Retro-fit kit includes punch for basin.
• Cooler must be pressurized. Bi-level and glass filler
prepped units are already pressurized. Single EZ
style coolers require field update.
BI-LEVEL COOLER RETRO-FIT
17 7/8
454mm
7
178mm
O 7/16 11mm
MOUNTING HOLES
(6)
15
381mm
3 9/16
90mm
18 13/16
478mm
BI-LEVEL REVERSE COOLER RETRO-FIT
17 7/8
7
178mm
7/16
O
11mm
MOUNTING HOLES
(6)
454mm
7
178mm
15
381mm
3 9/16
90mm
18 13/16
478mm
Job Name: _______________________________________
Date: ____________________ Qty: __________________
Contact Info (Name, Phone, Email): ____________________
_________________________________________________
_________________________________________________
Approval: _________________________________________
Page 2
© 2013 Elkay
(Rev 02/2013)
Loading...