Elkay LZWS-LRPBM28K User Manual

No Lead Two-Level SwirlFlo

Filtered Wall Mount, Barrier-Free

Refrigerated Fountain with EZH2O® Bottle Filling Station

SPECIFICATIONS

PRODUCT SPECIFICATION

Architectural fountains with integral bottle lling station. LZWS-LRPBM28K shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water. Units shall be stainless steel construction with plastic ABS alcove. Sensor-activation with an auto 20-second shut-off timer. Shall include Green Ticker™ displaying count of plastic bottles saved from waste. Bottle ller shall provide 1.1 gpm ow rate with laminar ow to minimize splashing. Shall include the Water Sentry® Plus 3000-gallon capacity lter, certied to NSF/ANSI 42 and 53, with visual monitor to indicate when replacement is necessary. Shall include integrated silver ion anti-microbial protection in key areas. Unit shall meet ADA guidelines. Unit shall be lead-free design which is certied to NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements. Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.

FOUNTAINS GENERAL

Fully exposed two-level fountain basins are #18 gauge, 300 series stainless steel polished to a lustrous satin nish with high shine outer edge. #16 gauge, 300 series tubular stainless steel support arms incorporate unique recess to be integrated with basin. One fountain positioned lower on the right for wheel-chair use. The other positioned on the left at standing height.

Fountains have contoured basin that minimizes splashing. Flexi-Guard® Safety bubblers are keyed in location to prevent rotation. Fully functional, vandal-resistant front push button. Flow regulator provides constant stream from 20 to 105 psi water pressure.

BOTTLE FILLER STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)

• WaterSentry®Plus 3000-gallon capacity Filtration System, certied to NSF/ANSI 42 & 53 (Lead, Class 1 Particulate, Chlorine, Taste & odor)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• LED Visual Filter Monitor shows when replacement is necessary

• Includes lower panel for easy access and servicing

OPTIONAL FEATURES (Additional Cost)

• For front access to bottle ller electricals, use access panel Item #ACCESS12X38-5)

COOLING SYSTEM

• Compressor: Hermetically-sealed, reciprocating type, single phase. Sealed-in lifetime lubrication.

• Condenser: Fan cooled. Fan motor is permanently lubricated.

• Cooling Unit: Combination tube-tank type. Continuous copper tubing with stainless steel tank. Fully insulated with EPS foam which meets UL requirements for self-extinguishing material.

• Refrigerant control: Refrigerant R134a is controlled by accurately calibrated capillary tube.

• Temperature Control: Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements, easily accessible by removing lower grille panel.

CAPACITIES CHART

Shown with one optional access panel installed

Model LZWS-LRPBM28K

Rated for Indoor Use Only

Model LZWS-LRPBM28K

CONSTRUCTION

LZWS-LRPBM28K two-level fountain furnished complete withFlexi-Guard® fully

assembled with front push button, ow regulator (120 to 105 psi), stainless steel back panel and surface mounting plate. No traps are furnished.

• Stainless Steel bottle ller construction with ABS plastic alcove

• Includes stainless steel lower panel

• Furnished with wall mounting frame constructed of galvanized steel

• Mounting can be ordered separately for pre-install

Replacement Filters: Available as Singles and Multi-packs. Order part numbers:

• 51300C (single)

• 51300C_3PK (three)

• 51300C_12PK (twelve)

• 51300C_24PK (twenty-four)

• 51300C_48PK (forty-eight)

Warranty: 5 year limited warranty on the unit’s refrigeration system. Electrical components and water system are warranted for 12 months from date of installation or 18 months from factory shipment, whichever date falls rst.

CERTIFICATIONS / STANDARDS

• ADA Compliant

• UL399 and CAN/CSA 22.2 No. 120 Certied

• NSF/ANSI 42 and 53 Certied (Filter Only)

• NSF/ANSI 61 and 372 Certied

• GreenSpec Listed

Model

LZWS-LRPBM28K 115V / 60Hz 8 GPH 5.0 370 173

In keeping with our policy of continuing product

improvement, Elkay reserves the right to change specication

without notice. Please visit elkay.com for the most current version.

Voltage /

Hertz

Chilling

Capacity

F.L.

Amps

Rated Watts

Approx. Ship

Wt.

2222 Camden Court OakBrook, IL 60523

630-572-3192

elkay.com

This specication describes an Elkay product with design, quality and functional benets to the user. When making a comparison of other producer’s offerings, be certain these features are not overlooked.

SPEC00048 (02/2015)

No Lead Two-Level SwirlFlo

Filtered Wall Mount, Barrier-Free

Refrigerated Fountain with EZH2O® Bottle Filling Station

Model LZWS-LRPBM28K

INSTALLER NOTE:

THIS DRINKING FOUNTAIN IS FURNISHED WITH A BUBBLER AND VALVE INCLUDING ALL CONNECTING FITTINGS WHICH ARE MANUFACTURED OF COMPLETELY LEAD FREE MATERIAL. SHUTOFF VALVE (NOT FURNISHED) TO ACCEPT 3/8” O.D. UNPLATED COPPER TUBE.

WALL OPENING

IMPORTANT: It is necessary to create a wall

opening 37 ½” W x 52 ⅛” H and 4 ½” above the oor line.

ELECTRICAL DATA

Junction box for a (3) wire 10 AMP branch circuit. Standard 120 Volt, 60 Hz, single phase.

Electrical outlet, three (3) conductor grounded. Locate within safe reach of power cord.

MOUNTING INSTRUCTIONS

Refer to rough-in for location of plumbing and electrical sources. The support frame is to be installed rst. Hang upper panel to hanger on frame. Fountains are to be attached to panel and wall frame. Water service lines, waste lines and electrical are assembled as required. Perform a nal check for leaks and correct functions of fountains and chiller. (For details see the installation instructions.)

Installation requires trap to be installed in wall. Trap and service stop not included.

Job Name: ______________________________

Date: __________________ Qty. ____________

Contact Info (Name, Phone, Email): __________

________________________________________

Approval: _______________________________

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

TUBE TO ATTACH

A B C

TUBE IS SECURED

IN POSITION

B CA

PUSH IN COLLET

TO RELEASE TUBE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

RELEASE TUBE

WALL LAYOUT

OPTIONAL BRACKET FOR ACCESS PANEL

5/16" SCREWS OR BOLTS

(20 REQ'D - NOT FURNISHED)

FRAME

5/16" HEX NUT

(4 REQ'D - PROVIDED)

P/N 111577343890

BOLT FRAMES TOGETHER

WITH 5/16" X 3/4" (19m) BOLTS

(4 REQ'D-PROVIDED)

P/N 111577243890

INSTALL (2) SCREWS

(P/N 111008343890) IN FRAME

BEFORE INSTALLING IN OPENING

ROUGH-IN DIMENSIONS

1/4” O.D. TUBE

WATER INLET

TO COOLER

P/N 101567443730

HOOK RODS (2)

3/8” O.D. TUBE CONNECT

COLD WATER SUPPLY

NOTE: WATERFLOW

DIRECTION

37 1/2" 952mm

BUILDING WATER

INLET

SERVICE STOP

(NOT FURNISHED)

3" 76mm

10 1/4"

260mm OPTIONAL FOR ACCESS PANEL

52 1/8" 1324mm

4 1/2" 114mm

SPEC00048 (02/2015)

34 5/8" 879mm

20 7/16" 519mm

FRONT VIEW

9 7/8" 251mm

FINISHED FLOOR

38 1/2" 978mm

18 11/16" 474mm

ACTIVATION SENSOR

44 3/4" 1137mm

41 11/16" 1059mm

1 5/8" 41mm

33 15/16" 862mm

1 5/8" 41mm

27" 686mm

ADA

REQUIREMENT

2222 Camden Court Oak Brook, IL 60523

SIDE VIEW

18 3/8" 467mm

5/8" 16mm

3/8" O.D. COPPER TUBE

WATER INLET ON

CHILLER. SHUT OFF

VALVE BY OTHERS

ELECTRICAL INLET

11" 279mm

1 1/8" 29mm

12"

305mm SPACE REQ'D BEHIND STUD WALL

BOTTLE FILLER DRAIN

1-1/4" (32mm) WASTE TUBES FURNISHED

1/4" O.D. COPPER TUBE. COLD WATER OUTLET

8" 203mm

4 1/2" 114mm

28 3/4" 730mm

36 1/2" 927mm