SPECIFICATIONS
EZH2O® In Wall Bottle Filling Station
Retro-t Model for
Filtered Soft Sides® Refrigerated Fountain
Model LZWS-ERFP8-RF
PRODUCT SPECIFICATION
In-wall LZWS-ERFP8-RF Retro-t system will update existing refrigerated Bi-Level Soft Sides® installations with an integrated Bottle
Filler system. Units shall be stainless steel construction with plastic
ABS alcove. Sensor activation with an auto 20-second shut-off
timer. Shall include GreenTicker™ displaying count of plastic bottles saved from waste. Bottle ller shall provide 1.1 gpm ow rate
with laminar ow to minimize splashing. Shall include integrated
silver ion anti-microbial protection in key areas. Bottle ller meets
ADA guidelines for reach range; fountain meets ADA guidelines for
wheelchair access. Unit shall be lead-free design which is certied
to NSF/ANSI 61 and 372 and meets Federal and State low-lead
requirements. Unit shall be certied to UL399 and CAN/CSA 22.2
No. 120.
STANDARD FEATURES
Bottle Filler
• No-touch, sensor-activated operation.
• Auto 20-second shut-off.
• WaterSentry® Plus 3000-gallon capacity Filtration System,
certied to NSF/ANSI 42 & 53 (Lead, Class 1 Particulate,
Chlorine, Taste & Odor).
• Integrated Silver Ion Anti-microbial Protection in key areas.
• Quick Fill Rate: 1.1 gpm.
• Laminar Flow provides minimal splash.
• Real Drain System eliminates standing water.
• Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste.
• LED Visual Filter Monitor shows when lter replacement is
necessary.
FOUNTAINS / COOLING SYSTEM
One fountain, one mounting frame (for lower fountain installation)
and the cooling system are reused from the current existing
installation.
Replacement Filters: Available as Singles and Multi-packs.
Order part numbers:
• 51300C (single)
• 51300C_3PK (three)
• 51300C_12PK (twelve)
• 51300C_24PK (twenty-four)
• 51300C_48PK (forty-eight)
CAPACITIES CHART
RATED FOR INDOOR USE ONLY
Model
LZWS-ERFP8-RF
CONSTRUCTION
• Stainless steel bottle ller construction with ABS plastic alcove.
• Includes ventilating louvered grille with fountain.
• Furnished with open wall frame mounting box constructed of
galvanized steel.
Each LZWS-ERFP8-RF is shipped in one carton containing:
• Upper panel with installed bottle ller
• Lower panel with ventilation louvers
• Mounting frame for bottle ller
• WaterSentry® Plus Filter
• Misc. hardware
Warranty: Electrical components and water system are warranted
for 12 months from date of installation or 18 months from factory
shipment, whichever date falls rst.
CERTIFICATIONS / STANDARDS
• ADA Compliant
• UL399 and CAN/CSA 22.2 No. 120 Certied
• ANSI/NSF 61 and 372 Certied
• ANSI/NSF 42 and 53 Certied (Filter only)
• GreenSpec® Listed
Model
LZWS-ERFP8-RF
The above ratings apply only to the LZWS-ERFP8-RF unit. Ratings
for cooler not included.
In keeping with our policy of continuing product
improvement, Elkay reserves the right to change
specication without notice. Please visit elkayusa.com
Voltage /
Hertz
115V /
60Hz
Chilling
Capacity
Based on
Existing
Cooler
Rating
F.L.
Amps
Rated
Watts
1.0 15 55
Approx.
Ship
Weight.
2222 Camden Court
OakBrook, IL 60523
This specication describes an Elkay product with design, quality
and functional benets to the user. When making a comparison of
other producer’s offerings, be certain these features are not overlooked.
2014 Elkay
630-572-3192
SPEC00129 (Rev 09/2014)
EZH2O® In Wall Bottle Filling Station
Retro-t Model for
Filtered Soft Sides® Refrigerated Fountain
Model LZWS-ERFP8-RF
ROUGH-IN
Job Name: ____________________________________
Date: ________________________ Qty. ____________
Contact Info (Name, Phone, Email): ________________
_____________________________________________
_____________________________________________
Approval: _____________________________________
INSTALLATION STEPS
Disassemble current Bi-Level Refrigerated
fountain installation
Remove left hand mounting frame, replace
with new open frame (included)
IMPORTANT!
*Rated for indoor use only
LZWS-ERFP8-RF Retro-t is designed to t on an existing Soft Sides® refrigerated style fountain which is properly installed per the Spec Sheet rough-in
information.
ELECTRICAL
LZWS-ERFP8-RF equipped with electrical cord and three-prong molded rubber
plug for use with 15-amp minimum receptacle. Rated at 115V/60Hz, single phase.
Reassemble installation with new upper panel / Bottle Filler assembly, original fountain, original lower mounting frame, chiller
shelf, chiller unit and new lower panel assembly
Typical current installation with fountains
and panels removed
BOTTLE FILLER / FOUNTAIN INSTALLATION AFTER RETRO-FIT CONVERSION
38 1/2"
978mm
ACTIVATION
SENSOR
22 15/16"
583mm
17 7/8"
455mm
9 13/16"
249mm
18 13/16"
478mm
12 1/8"
308mm
3 13/16"
97mm
30 1/16"
764mm
33 7/16"
849mm
1 5/8"
41mm
27"
686mm
ADA
REQUIREMENT
A
18 5/8"
473mm
5/8"
16mm
23 5/16"
592mm
31 1/4"
794mm
FINISHED FLOOR
2014 Elkay
SPEC00129 (Rev 09/2014)
2222 Camden Court
Oak Brook, IL 60523
elkay.com
4 1/2"
114mm
Printed in U.S.A.
©2014 Elkay