EZH2O® Bottle Filling Station with
High-Efciency GreenSpec® Listed
Versatile Bi-Level Filtered Water Cooler
Model LZSTLG8WS
PRODUCT SPECIFICATION
High-efciency electric, refrigerated water cooler and bottle lling station. Model
LZSTLG8WS shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F
inlet water. Cooler units shall have pushbar activation. Bottle lling unit shall include
an electronic sensor for touchless activation with auto 20-second shut-off timer.
Shall include Green Ticker™ displaying count of plastic bottles saved from waste.
Bottle ller shall provide 1.1 gpm ow rate with laminar ow to minimize splashing.
Shall include the WaterSentry
NSF/ANSI 42 and 53, with visual monitor to indicate when replacement is
necessary. Shall include integrated silver ion anti-microbial protection in key areas.
Unit shall meet ADA guidelines. Unit shall be lead-free design which is certied to
NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements.
Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120. Unit shall be
GreenSpec® Listed.
STANDARD FEATURES
• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)
• Easy-Touch front and side pushbar controls (Cooler)
• WaterSentry® Plus 3000-gallon capacity Filtration System, certied to
NSF/ANSI 42 & 53 (Lead, Class 1 Particulate, Chlorine, Taste & Odor)
• Integrated Silver Ion Anti-microbial Protection in key areas
• Quick Fill Rate of 1.1 gpm
• Laminar Flow provides minimal splash
• Real Drain System eliminates standing water
• Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste
• LED Visual Filter Monitor shows when replacement is necessary
• Flexi-Guard® StreamSaver™ water conservation bubbler
• *Versatile cooler design allows units to be installed either left-hand high
and right-hand low or left-low and right high
• Cooler panel nishes: Light Gray Granite Vinyl Clad Steel or Stainless Steel
• Energy efciency performance exceeds average market performance
by 35% per CSA 815-99
COOLING SYSTEM
• High-efciency Compressor: Hermetically-sealed, reciprocating type,
single phase. Sealed-in lifetime lubrication.
• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is
permanently lubricated.
• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS foam
which meets UL requirements for self-extinguishing material.
• Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.
• Temperature Control: Easily accessible enclosed adjustable
thermostat is factory preset. Requires no adjustment other than for
altitude requirements.
®
Plus 3000-gallon capacity lter, certied to
RATED FOR INDOOR USE ONLY
*Versatile cooler conguration
as shipped
*Versatile cooler conguration
alternate installation
CONSTRUCTION
• Stainless Steel basin with integral drain
• Galvanized structural steel cooler chassis provides
structural integrity
• Cooler cabinet available as Light Gray Granite Vinyl Clad
Steel or Stainless Steel (additional cost) construction
• Flexi-Guard® StreamSaver™ Safety bubbler utilizes an infused
anti-microbial pliable polyester elastomer to prevent
accidental mouth injuries. Flexes on impact. Lower-ow water
efcient water stream.
Replacement Filters: Available as Singles and Multi-packs.
Order part numbers:
• 51300C (single)
• 51300C_3PK (three)
• 51300C_12PK (twelve)
• 51300C_24PK (twenty-four)
• 51300C_48PK (forty-eight)
Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12
months from date of installation or 18 months from factory shipment,
whichever date falls rst.
CAPACITIES CHART
Model
LZSTLG8WS*K 115V / 60Hz 8 GPH 4.2 360 92 lbs.
*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels.
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
In keeping with our policy of continuing product improvement,
Elkay reserves the right to change specication without notice.
Please visit elkay.com for the most current version.
Voltage /
Hertz
Chilling**
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Wt.
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
UL399
and CAN/
CSA 22.2
No. 120
Certied
NSF/ANSI
42 and 53
Certied
(Filter
only)
GreenSpec®
Listed
ADA
COMPLIANT
NSF/ANSI
61 and 372
Certied
• • • • •
This specication describes an Elkay product with design, quality and functional
benets to the user. When making a comparison of other producer’s offerings,
be certain these features are not overlooked.
SPEC00095 (12/2015)
© 2015 Elkay
EZH2O® Bottle Filling Station with
High-Efciency GreenSpec® Listed
Versatile Bi-Level Filtered Water Cooler
Model LZSTLG8WS
ROUGH-IN DIMENSIONS
IMPORTANT! INSTALLER PLEASE NOTE:
These units are designed and built to provide water to the user which has not
been altered by materials in the cooler waterway. The grounding of electrical
equipment such as telephone, computers, etc. to water lines is a common
procedure. This grounding may be in the building but may also occur away from
the building. This grounding can cause electrical feedback into a water cooler
creating an electrolysis which results in a metallic taste or an increase in the
metal content of the water. This condition is avoidable by installing the cooler
using the proper materials as shown.
Model shown with Flexi-Guard StreamSaver™ Bubbler.
ROUGH-IN FOR LEFT-HAND HIGH SIDE MODELS
17 7/8"
454mm
7"
‰
B
3 7/8"
98mm
5 3/4"
7"
FINISHED FLOOR
178mm
6 3/8"
162mm
PREFERRED
LOCATION
51mm
51 9/16"
1310mm
2"
51mm
34 5/16"
872mm
OPTIONAL
FILTER
(ALT. LOCATION)
24 1/2"
622mm
22 15/16"
9/32" Ø
7mm Ø
HOLES
12
A
583mm
E
F
19 7/16"
494mm
6 3/8"
162mm
D
PREFERRED
LOCATION
‰
17 7/16"
443mm
18 3/8"
467mm
6 3/8"
162mm
2"
51mm
7/8"
22mm
D
(ALT. LOCATION)
13 15/16"
354mm
178mm
6 3/8"
162mm
146mm
178mm7"178mm
NOTICE
RATED FOR INDOOR USE ONLY
This water cooler must be connected to the water supply using a dielectric
coupling. The cooler is furnished with a non-metallic strainer which meets this
requirement. The drain trap which is provided by the installer should also be
plastic to completely isolate the cooler from the building plumbing system.
Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown).
Water and electrical will connect through pre-punched hole in basin.
7/16" X 3/4"
381mm
F
19"
483mm
15"
E
2 7/8"
73mm
21 7/8"
556mm
11mm X 19mm
OBROUND HOLES
(6)
ACTIVATION
SENSOR
2"
51mm
38 1/2"
979mm
28 13/16"
732mm
38 3/8"
975mm
ORIFICE
HEIGHT
36 13/16"
936mm
RIM
HEIGHT
32 7/8"
835mm
ORIFICE
HEIGHT
31 5/16"
796mm
RIM
HEIGHT
REQUIREMENT
27"
686mm
ADA
8 1/16"
205mm
7"
A
2"
19"
483mm
HANGER BRACKET
FILTER
C
12 1/2"
318mm
3 9/16"
90mm
1 7/16"
37mm
3"
77mm
18 7/8"
479mm
REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDREN’S ADA COOLER
LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/2” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet
louvers to wall.
Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes:
F = 7/16” (11mm) Bolt Holes for fastening to wall.
NOTE: New Installations Must Use Ground Fault Circuit Interrupter (GFCI)
Page 2
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
Printed in U.S.A.
© 2015 Elkay
elkay.com