Elkay LZSTL8WS, LZSTLDDWS User Manual

EZH2O® Bottle Filling Station

Versatile Bi-Level Filtered LZ Cooler

Models LZSTL8WS & LZSTLDDWS

PRODUCT SPECIFICATION

Unit shall include electric water cooler with bottle lling station. Model LZSTL8WS
shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water.
LZSTLDDWS shall deliver non-chilled drinking water. Cooler units shall have pushbar
activation. Bottle lling unit shall include an electronic sensor for touchless activation
with auto 20-second shut-off timer. Shall include Green Ticker™ displaying count of
plastic bottles saved from waste. Bottle ller shall provide 1.1-1.5 gpm ow rate with
laminar ow to minimize splashing. Shall include the WaterSentry® Plus 3000-gallon
capacity lter, certied to NSF/ANSI 42 and 53, with visual monitor to indicate when
replacement is necessary. Shall include integrated silver ion anti-microbial protection
in key areas. Unit shall meet ADA guidelines. Unit shall be lead-free design which is
certied to NSF/ANSI 61 & 372 and meets Federal and State low-lead requirements.
Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.

STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)

• Easy-Touch front and side pushbar controls (Cooler)

• WaterSentry® Plus 3000-gallon capacity Filtration System, certied to
NSF/ANSI 42 & 53 (Lead, Class 1 Particulate, Chlorine, Taste & Odor)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm (LZSTL8WS); 1.5 gpm (LZSTLDDWS)

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• LED Visual Filter Monitor shows when replacement is necessary

• Available with Flexi-Guard® bubbler or optional Vandal-resistantt bubbler
(tincludes “VR” code in model no. see chart below)

• *Versatile cooler design allows units to be installed either left-hand high and
right-hand low or left-low and right high

• Cooler panel nishes: Light Gray Granite Vinyl Clad Steel or Stainless Steel

COOLING SYSTEM (Models LZSTL8WS & LZSTL8WSVR only)

• Compressor: Hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is
permanently lubricated.

• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS foam
which meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat
is factory preset. Requires no adjustment other than for altitude
requirements.

RATED FOR INDOOR USE ONLY

*Versatile cooler conguration
as shipped

*Versatile cooler conguration

alternate installation

CONSTRUCTION

• Stainless Steel basin with integral drain

• Galvanized structural steel cooler chassis provides
structural integrity

• Stainless steel bottle ller wrapper with ABS plastic alcove

• Cooler cabinet available as Light Gray Granite Vinyl Clad
Steel or Stainless Steel (additional cost) construction

• Flexi-Guard® Safety bubbler (option) utilizes an infused
anti-microbial pliable polyester elastomer to prevent accidental
mouth injuries. Flexes on impact.

• Vandal-resistantt bubbler (option) is one-piece heavy-duty

Replacement Filters: Available as Singles and Multi-packs.
Order part numbers:

• 51300C (single)

• 51300C_3PK (three)

• 51300C_12PK (twelve)

• 51300C_24PK (twenty-four)

• 51300C_48PK (forty-eight)

Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12
months from date of installation or 18 months from factory shipment,
whichever date falls rst.

CAPACITIES CHART

Model

LZSTL8WS(VR)*K 115V / 60Hz 8.0 GPH 5.0 370 92 lbs

LZSTL8WS(VR)*2K 220V / 50Hz 6.7 GPH 2.5 370 92 lbs

LZSTL8WS(VR)*3K 220V / 60Hz 8.0 GPH 2.5 370 92 lbs

LZSTLDDWS(VR)*K 115V/60 Hz

LZSTLDDWS(VR)*2K 220V/50Hz

LZSTLDDWS(VR)*3K 220V/60Hz

*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler wrapper
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
++Complies; not third party certied

In keeping with our policy of continuing product improvement,
Elkay reserves the right to change specication without notice.
Please visit elkay.com for the most current version.

Voltage /

Hertz

Chilling**

Capacity

–

–

–

F.L.

Amps

1.0 15 66 lbs

0.5 15 66 lbs

0.5 15 66 lbs

Approx.

Rated
Watts

Ship

Wt.

2222 Camden Court
Oak Brook, IL 60523

630-572-3192

UL399 and

CAN/CSA 22.2

elkay.com

ANSI/NSF
42 and 53

Certied

(Filter

only)

GreenSpec®

No. 120

Certied

ADA

COMPLIANT

ANSI/NSF

61 and 372

Certied

• • • • •

++ • • • •

++ • • • •

• • • • •

++ • • • •

++ • • • •

This specication describes an Elkay product with design, quality and functional
benets to the user. When making a comparison of other producer’s offerings,
be certain these features are not overlooked.

SPEC14-70 (04/2015)

Listed

© 2015 Elkay

EZH2O® Bottle Filling Station
Versatile Bi-Level Filtered LZ Cooler
Models LZSTL8WS & LZSTLDDWS

IMPORTANT! INSTALLER PLEASE NOTE:

These units are designed and built to provide water to the user which has not
been altered by materials in the cooler waterway. The grounding of electrical
equipment such as telephone, computers, etc. to water lines is a common
procedure. This grounding may be in the building but may also occur away from
the building. This grounding can cause electrical feedback into a water cooler
creating an electrolysis which results in a metallic taste or an increase in the
metal content of the water. This condition is avoidable by installing the cooler
using the proper materials as shown.

Model shown with Flexi-Guard® bubbler.

ROUGH-IN FOR LEFT-HAND HIGH SIDE MODELS

17 7/8"

454mm

7"

178mm

18 3/8"

467mm

51 9/16"
1310mm

2"

51mm

34 5/16"
872mm

OPTIONAL
FILTER

(ALT. LOCATION)

24 1/2"

622mm

22 15/16"

583mm

9/32" Ø
7mm Ø
HOLES
12

A

E

F

19 7/16"
494mm

6 3/8"

162mm

D

PREFERRED

LOCATION

‰

17 7/16"

443mm

6 3/8"

162mm

2"

51mm

7/8"

22mm

D

(ALT. LOCATION)

13 15/16"
354mm

6 3/8"

162mm

B

3 7/8"

98mm

5 3/4"

146mm

7"

178mm7"178mm

FINISHED FLOOR

‰

ROUGH-IN DIMENSIONS

RATED FOR INDOOR USE ONLY

NOTICE

This water cooler must be connected to the water supply using a dielectric
coupling. The cooler is furnished with a non-metallic strainer which meets this
requirement. The drain trap which is provided by the installer should also be
plastic to completely isolate the cooler from the building plumbing system.

Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown).
Water and electrical will connect through pre-punched hole in basin.

7"

178mm

6 3/8"

162mm

A

PREFERRED

LOCATION

2"

51mm

381mm

F

19"

483mm

15"

E

2 7/8"
73mm

21 7/8"

556mm

7/16" X 3/4"
11mm X 19mm
OBROUND HOLES
(6)

ACTIVATION
SENSOR

2"

51mm

38 1/2"

979mm

28 13/16"

732mm

38 3/8"
975mm
ORIFICE
HEIGHT

36 13/16"

936mm

RIM

HEIGHT

32 7/8"

835mm

ORIFICE
HEIGHT

31 5/16"
796mm

RIM

HEIGHT

REQUIREMENT

27"

686mm

ADA

HANGER BRACKET

8 1/16"

205mm

FILTER

483mm

C

12 1/2"

318mm

19"

3 9/16"
90mm

18 7/8"

479mm

1 7/16"
37mm

3"

77mm

REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/2” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet

Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes:

louvers to wall.

F = 7/16” (11mm) Bolt Holes for fastening to wall.
NOTE: New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

Printed in U.S.A.

© 2015 Elkay

Page 2

2222 Camden Court
Oak Brook, IL 60523

630-572-3192

elkay.com