Elkay LVRCGRNTL8WSK User Manual

EZH2O® Bottle Filling Station

with Bi-Level Filtered High-Efciency Cooler

SPECIFICATIONS

PRODUCT SPECIFICATION

Unit shall include high-efciency bi-level electric water cooler with bottle lling station. VRCGRNTL8WSK shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water. Lower units shall have Vandal-resistant pushbutton activation with Vandal-resistant StreamSaver™ water conservation bubbler. Bottle lling unit shall include an electronic sensor for touchless activation with auto 20-second shut-off timer. Shall include Green Ticker™ displaying count of plastic bottles saved from waste. Bottle ller shall provide 1.1 gpm ow rate with laminar ow to minimize splashing. Shall include integrated silver ion anti-microbial protection in key areas. Unit shall meet ADA guidelines. Unit shall be lead-free design which is certied to NSF/ANSI 61and 372 and meets Federal and State low-lead requirements. Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.

STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)

• Vandal-resistant, easy to operate front pushbutton control (Cooler)

• WaterSentry® Plus 3000-gallon capacity Filtration System, certied to NSF/ANSI 42 & 53 (Lead, Class 1 Particulate, Chlorine, Taste & Odor)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• Cooler panel nish: Stainless Steel

COOLING SYSTEM

• High-Efciency Compressor: hermetically-sealed, reciprocating type, single phase. Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is permanently lubricated.

• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous copper tubing with stainless steel tank. Fully insulated with EPS foam which meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.

CAPACITIES CHART

Model

LVRCGRNTL8WSK 115V / 60Hz 8 GPH 3.8 260 112

Voltage /

Hertz

Chilling**

Capacity

F.L.

Amps

Rated Watts

Approx.

Ship

Wt.

Model LVRCGRNTL8WSK

RATED FOR INDOOR USE ONLY

Model

LVRCGNTL8WSK

CONSTRUCTION

• Stainless Steel basin with integral drain

• Galvanized structural steel cooler chassis provides

structural integrity

• Stainless steel bottle ller wrapper with ABS plastic alcove.

• Cooler cabinet is Stainless Steel construction

• Vandal-resistant StreamSaver™ water-efcient bubbler is one-piece heavy-duty chrome-plated

Replacement Filters: Available as Singles and Multi-packs. Order part numbers:

• 51300C (single)

• 51300C_3PK (three)

• 51300C_12PK (twelve)

• 51300C_24PK (twenty-four)

• 51300C_48PK (forty-eight)

CERTIFICATIONS / STANDARDS

• ADA Compliant

• UL399 and CAN/CSA 22.2 No. 120 Certied

• ANSI/NSF 61 and 372 Certied

• ANSI/NSF 42 and 53 Certied (Filter only)

• GreenSpec® Listed

**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.

Warranty: 5 year limited warranty on the unit’s refrigeration system. Electrical components and water system are warranted for 12 months from date of installation or 18 months from factory shipment, whichever date falls rst.

In keeping with our policy of continuing product improvement, Elkay reserves the right to change specication without notice. Please visit elkaypro.com for the most current version.

2222 Camden Court OakBrook, IL 60523

630-572-3192

elkay.com

This specication describes an Elkay product with design, quality and functional benets to the user. When making a comparison of other producer’s offerings, be certain these features are not overlooked.

SPEC14-74 (09/2014)

EZH2O® Bottle Filling Station

with Bi-Level Filtered High-Efciency Cooler Model LVRCGRNTL8WSK

ROUGH-IN

RATED FOR INDOOR USE ONLY

IMPORTANT! INSTALLER PLEASE NOTE:

These units are designed and built to provide water to the user which has not been altered by materials in the cooler waterway. The grounding of electrical equipment such as telephone, computers, etc. to water lines is a common procedure. This grounding may be in the building but may also occur away from the building. This grounding can cause electrical feedback into a water cooler creating an electrolysis which results in a metallic taste or an increase in the metal content of the water. This condition is avoidable by installing the cooler using the proper materials as shown.

58 9/16" 1488mm

MOUNTING HOLES

ACTIVATION SENSOR

45 9/16" 1157mm

37 1/2"

952mm

7/16"

11mm

(6)

15"

381mm

5/16" (8mm) DIA.

6 1/2"

165mm

7 1/4"

185mm

20 3/8" 518mm

5 3/4"

146mm

(10 HOLES)

1 3/8"

35mm

2 9/16" 65mm

178mm

4 9/16" 116mm

127mm

17 7/8"

454mm

178mm

1 3/8" 35mm

10"

254mm

FINISHED FLOOR

11/16" 18mm

2 7/16" 63mm

5 3/4"

146mm

18 1/16"

459mm

5 3/4"

146mm

1 3/8"

35mm

3 1/2"

6 1/4"

159mm

89mm

4 1/2"

114mm

NOTICE

This water cooler must be connected to the water supply using a dielectric coupling. The cooler is furnished with a non- metallic strainer which meets this requirement. The drain trap which is provided by the installer should also be plastic to completely isolate the cooler from the building plumbing system.

Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown). Water and electrical will connect through pre-punched hole in basin.

3 9/16" 90mm

18 5/8"

472mm

5 3/4"

146mm

13 7/8"

352mm

18 3/4"

476mm

20 1/8" 511mm

25 1/8"

638mm

39 7/16"

1002mm

ORIFICE HEIGHT

32 15/16"

837mm

2 5/8" 67mm

31 15/16"

811mm

RIM HEIGHT

27"

686mm

ADA

REQUIREMENT

203mm

105mm

HANGER BRACKET

4 1/8"

12 5/16" 313mm

6 3/4"

172mm

18 7/8"

479mm

REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND: A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept 3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall. B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain. Drain stub 2” (51mm) out from wall. C = 1-1/2” Trap (not furnished). D = Electrical Supply (3) Wire Recessed Box Duplex Outlet. E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet

Job Name: ____________________________________ Model: _______________________ Qty. ____________ Contact: ______________________________________ Approval Signature: _____________________________ Notes:

louvers to wall. F = 7/16” (11mm) Bolt Holes for fastening to wall. **New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

2222 Camden Court Oak Brook, IL 60523

Printed in U.S.A.

elkay.com