Elkay LRADQ3322, LRQ3322, LRAD3322 User Manual
GENERAL
Highest quality sink formed of #18 gauge, type 304 (18-8) nickel
bearing stainless steel. Self-rimming.
DESIGN FEATURES
LR(Q) Bowl Depth: 8-1/8".
LRAD(Q) Bowl Depth: 5-1/2", 6" or 6-1/2".
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl Recess: 3/8" drop ledge with a raised faucet deck.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted satin finish.
Underside: LR(Q)3322 is fully protected by Sound Guard
®
undercoating to dampen sound and prevent condensation.
LRAD(Q)3322 is fully undercoated to dampen sound and prevent
condensation.
OTHER
LR(Q)3322 Drain Openings: 3-1/2" and centered in bowls as
illustrated.
LRAD(Q)3322 Drain Openings: 3-1/2" and located centered
left-to-right and off-center front-to-back as illustrated.
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKWRB1316SS or LKWERBSS.
Utensil Caddy for Rinsing Basket: LKWUCSS.
Bottom Grids: LKWBG1316SS for LR(Q)3322, LKWOBG1316SS
for LRAD(Q)3322.
Cutting Boards: CB1613, CB1713, CBR1316 or CBS1316.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2007 Elkay
(Rev. 3/07) 1-160C
elkayusa.com
Model LR(Q)33224
Model LR(Q)33224 Illustrated Model LRAD(Q)3322554 Illustrated
4" 4" 4"
33"
13-1/2"
1-1/4"
13-1/2"
14-3/4"
8"
8-1/8"
16" 16"
22"
1-3/4" R
1-3/4" R
4" 4" 4"
33"
13-1/2"
1-1/4"
13-1/2"
14-3/4"
5"
5-1/2"
22"
1-3/4" R
1-3/4" R
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
THIS PRODUCT, AS
CONSTRUCTED IS SUBJECT
TO INTERPRETATION OF
A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE
SPACE REQUIRED TO
SATISFYA.D.A. STANDARDS
MAY NOT BE DESIRABLE.
*Length is left to right.Width is front to back.
**Available in 5-1/2", 6" and 6-1/2" depths. Please consult your sales representative for other depths or modifications.
Lustertone®Double Bowl Sink
Models LR3322, LRQ3322 and LRAD3322,
LRADQ3322 - A.D.A. Compliant Sinks
®
SPECIFICATIONS
SINK DIMENSIONS (INCHES)*
These sinks comply with ASME A112.19.3.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Cutout in
No. of
Countertop
1
1
/
2" Dia. 3
1
/
2"
U-Channel Quick-Clip
®
(11/2" Radius
Faucet Drain" Opening Minimum
Model Model
Overall Inside Bowl Corners)
Holes (see above Cabinet
Number Number L W L W D L W 4" Center for details) Size
LR3322 LRQ3322 33 22 131/2 16 81/8 323/8 213/8 1, 2, MR2, 3,4 or 5 Centered 36
LRAD3322 LRADQ3322 33 22 131/
2 16 ** 32
3
/
8 21
3
/
8 1, 2, MR2, 3,4 or 5 Off-Centered 36
Lustertone®Double Bowl Sink
Models LR3322, LRQ3322 and LRAD3322,
LRADQ3322 - A.D.A. Compliant Sinks
®
SPECIFICATIONS
Quick-Clip® Mounting System
U-Channel Type Mounting System
Elkay
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
Printed in U.S.A.
©2007 Elkay
1-160C (Rev. 3/07)
HOLE DRILLING
CONFIGURATIONS
1
4"
2
4"
MR2
4" 4"
3
4" 4" 4"
4
4" 4" 4" 4"
5
Loading...