Elkay LRAD2522451 Specs

SP EC IF IC AT IO NS

LRAD2522, LRADQ2522 - A.D.A. Compliant

GENERAL

Highest quality sink formed of #18 (1.2mm) gauge, type 304 (18-8) nickel bearing stainless steel. Top mount.

DESIGN FEATURES

LR(Q)2522 Bowl Depth: 8-1/8" (203mm). LRAD(Q)2522 Bowl Depth: 4" (102mm), 4-1/2" (114mm),

5" (127mm), 5-1/2" (140mm), 6" (152mm) or 6-1/2" (165mm).

Coved Corners: 1-3/4" (44mm) vertical and horizontal radius. Raised Rim: 3/8" (10mm) drop ledge with a raised faucet deck. Finish: Exposed surfaces are hand polished to a Lustrous

Highlighted Satin finish. Underside: LR(Q)2522 is fully protected by heavy duty Sound

Guard

undercoating to dampen sound and reduce condensatidon. LRAD(Q)2522 is fully undercoated to dampen sound and reduce condensation.

OTHER

LR(Q)2522 Drain Opening: 3-1/2" (89mm) and centered in bowl as illustrated.

LRAD(Q)2522 Drain Opening: 3-1/2" (89mm) and located cen

tered left-to-right and off-center front-to-back as illustrated. NOTE: Unless otherwise specified sink is furnished with

faucet holes as shown. Sink complies with ASME A112.19.3-2008 / CSA B45.4-08

These sinks are listed by the International Association of Plumbing and Mechanical Officials as meeting the requirements of the Uniform Plumbing Code.

OPTIONAL ACCESSORIES

Bottom Grids: LKWBG2115SS (LR(Q)2522), LKWOBG2115SS (LRAD(Q)2522) Cutting Boards: CB1516 Drain: LK99 Rinsing Baskets: LKWRB2115SS, LKWERBSS Utensil Caddy for Rinsing Basket: LKWUCSS

Gourmet Single Bowl Sink

Models LR2522, LRQ2522

Model LR(Q)25224

SINKS ARE

MADE IN THE USA

U-Channel Type Mounting System

Quick-Clip®Mounting System

SEE NEXT PAGE FOR PRODUCT DIMENSIONS.

THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS.

THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkayusa.com for most current version of Elkay product specification sheets.

Elkay

elkayusa.com

2222 Camden Court Oak Brook, IL 60523

1-1/2” (38mm) Diameter Faucet Holes 4"(102mm) Center

This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Hole Drilling Configurations

1 2

MR2 3

4"4"4" 4"

4 5

4" 4" 4"

4" 4"

(Rev. 05/10) 1-61J

Gourmet Single Bowl Sink Models LR2522, LRQ2522 LRAD2522, LRADQ2522 - A.D.A. Compliant

SINK DIMENSIONS*

SP EC IF IC AT IO NS

Overall Inside Bowl

L W

(635mm) (559mm) (533mm) (400mm) (206mm) (619mm) (543mm) (762mm)

(635mm) (559mm) (533mm) (400mm) (762mm)(619mm) (543mm)

(559mm)

15-3/4"

(400mm)

L W D

22"

1-3/4" R (44mm)

(102mm)

21"

(533mm)

25"

(635mm)

1-3/4" R (44mm)

U-Channel Quick-Clip

Model Model

Number Number Center for details) Size

LR252 2 LRQ2522 25 22 21 153/4 81/8 243/8 213/8 1, 2, MR2, 3, 4 or 5 Centered 30

LRAD2 52 2 LRADQ25 22 25 22 21 153/4 ** 243/8 213/8 1, 2, MR2, 3, 4 or 5 Off-Centered 30

*Length is left to right. Width is front to back .

**Available in 4"(102mm), 4-1/2"(114mm), 5"(127mm), 5-1/2" (140mm), 6" (152mm) and 6-1/2" (165mm) depths.

7-7/8"

(200mm)

Cutout in

Countertop

(1-1/2"(38mm)

Radius Corners)

(102mm)

(127mm)

21"

(533mm)

25"

(635mm)

No. of

/2" (38mm) Dia. 31/2" (89mm)

Faucet Holes Drain" Opening Minimum

4" (102mm) (see below Cabinet

22"

(559mm)

15-3/4"

(400mm)

1-3/4" R (44mm)

Model LR(Q)25224 Illustrated

8-1/8"

(206mm)

1-3/4" R (44mm)

Model LRAD(Q)25224 Illustrated

4(102mm), 4-1/2(114mm) 5(127mm), 5-1/2(140mm) 6(152mm), 6-1/2(165mm)

Elkay

1-61J (Rev. 05/10)

2222 Camden Court Oak Brook, IL 60523

elkayusa.com