Elkay LR3322 User Manual

U-Channel Type Mounting System

Models LR3322, LRQ3322 and LRAD3322,

SPECIFICATIONS

GENERAL

Highest quality sink formed of #18 (1.2mm) gauge, type 304 (18-8) nickel bearing stainless steel. Top Mount.

DESIGN FEATURES

LR(Q) Bowl Depth: 8-1/8" (206mm). LRAD(Q) Bowl Depth: 4" (102mm), 4-1/2" (114mm), 5" (127mm), 5-1/2" (140mm), 6" (152mm), or 6-1/2" (165mm). Coved Corners: 1-3/4" (44mm) vertical and horizontal radius. Bowl Recess: 3/8" (10mm) drop ledge with a raised faucet deck. Finish: Exposed surfaces are hand blended to a lustrous highlighted satin finish. Underside: LR(Q)3322 is fully protected by Sound Guard undercoating to dampen sound and prevent condensation. LRAD(Q)3322 is fully undercoated to dampen sound and reduce condensation.

OTHER

LR(Q)3322 Drain Openings: 3-1/2" (89mm) and centered in bowls as illustrated. LRAD(Q)3322 Drain Openings: 3-1/2" (89mm) and located centered left-to-right and off-center front-to-back as illustrated. NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown.

OPTIONAL ACCESSORIES

Rinsing Baskets: LKWRB1316SS or LKWERBSS. Utensil Caddy for Rinsing Basket: LKWUCSS. Bottom Grids: LKWBG1316SS for LR(Q)3322, LKWOBG1316SS for LRAD(Q)3322. Cutting Boards: CB1613, CB1713, CBR1316, or CBS1316.

Lustertone

Double Bowl Sink

LRADQ3322 - A.D.A. Compliant Sinks

Model LR(Q)33224

The LRAD3322 and LRADQ3322 model sinks are compliant to ADA and ANSI/ICC A117.1 accessibility requirements when installed according to the requirements outlined in these standards.

Sink complies with ASME A112.19.3/ CSA B45.4

Sinks are listed by IAPMO as meeting the applicable requirements of the Uniform Plumbing Code , International Plumbing Code , and National Plumbing Code of Canada.

SEE OTHER SIDE FOR PRODUCT DIMENSIONS.

Quick-Clip®Mounting System

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets.

Elkay

elkay.com

This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

2222 Camden Court

Oak Brook, IL 60523

1-160

Lustertone

Double Bowl Sink Models LR3322, LRQ3322 and LRAD3322, LRADQ3322 - A.D.A. Compliant Sinks

SINK DIMENSIONS*

Cutout in

Countertop

U-Channel Quick-Clip

Model Model

Number Number L W L W D L W Center for details) Size

Overall Inside Bowl Radius Corners)

LR332 2 LRQ33 22 33 22 131/2 16 81/8 323/8 213/8 1, 2,MR2, 3,4 or 5 Centered 36

(838mm) (559mm) (343mm) (406mm) (206mm) (822mm) (543mm) (914mm)

LRAD3 322 LRADQ3322 33 22 131/2 16

(838mm) (559mm) (343mm) (406mm) (822mm) (543mm) (914mm)

*Length is left to right. Width is front to back. **Available in 4" (102mm), 4-1/2" (114mm), 5" (127mm), 5-1/2" (140mm), 6" (152mm), and 6-1/2" (165mm) depths. Please consult your sales representative for other depths or modifications.

(11/2" [38mm]

323/8 213/8 1, 2,MR2, 3,4 or 5 Off-Centered 36

SPECIFICATIONS

/2"

No. of 1

(38mm) Dia. 31/2" (89mm) Faucet Holes Drain" Opening Minimum 4" (102mm) (see above Cabinet

(102mm)

33"

(838mm)

14-3/4"

(375mm)

1-3/4"

(44mm) R

13-1/2"

(343mm)

(203mm)

13-1/2"

(343mm)

1-3/4"

(44mm) R

Model LR(Q)33224 Illustrated

16"

(406mm)

8-1/8"

(206mm)

(102mm)

22"

(559mm)

(127mm)

13-1/2"

(343mm)

(838mm)

1-3/4"

(44mm) R

14-3/4"

(375mm)

Model LRAD(Q)3322554 Illustrated

33"

1-3/4"

(44mm) R

13-1/2"

(343mm)

Hole Drilling Configurations

(32mm) Diameter Faucet Holes on 4" (102mm) Centers

1-1/2

16"

(406mm)

5-1/2"

(140mm)

22"

(559mm)

MR2

Elkay

elkay.com

2222 Camden Court

Oak Brook, IL 60523

1-160