Elkay LMRQ3322, LMR33224 User Manual
Model LMR33224 Illustrated
4"
15-3/4"
22"
7-1/2"
5-1/8"
7-7/8"
33"
21"
4" 4"
1-3/4" R
1-3/4" R
1-3/4" R
1-1/4"
3" R
GENERAL
Highest quality sink bowls seamlessly formed of #18 gauge, type
304 (18-8) nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depths: 5-1/8" (left bowl), 7-7/8" (right bowl).
Coved Corners: 3" and 1-3/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of sink.
Finish: Exposed surfaces are hand blended to a lustrous high-
lighted satin finish.
Underside: Fully protected by heavy duty Sound Guard
®
under-
coating to dampen sound and prevent condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
These sinks comply with ANSI Standard A112.19.3M.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKRB1520, LKRB715 or LKERBSS.
Bottom Grid: LKBG2015.
Cutting Board: CB816 or CBS715.
Model LMR(Q)33224
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT
TO MILLIMETERS MULTIPLY BY 25.4.
SINK DIMENSIONS (INCHES)*
*
Length is left to right. Width is front to back.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2004 Elkay
(Rev. 3/04) 1-58E
www.elkayusa.com
Lustertone®Double Bowl Sink
Models LMR3322 and LMRQ3322
®
SPECIFICATIONS
Quick-Clip® Mounting System
U-Channel Type Mounting System
Cutout in
No. of
Countertop
1
1
/2" Dia.
U-Channel Quick-Clip
®
Inside Inside (11/2" Radius
Faucet Minimum Ship.
Model Model
Overall Left Bowl Right Bowl Corners)
Holes Cabinet Wt.
Number Number L W L W D L W D L W 4" Centers Size Lbs.
LMR3322 LMRQ3322 33 22 71/2 153/4 51/8 21 153/4 77/8 323/8 213/8 1, 2, MR2,3, 4, or 5 36 21
HOLE DRILLING
CONFIGURATIONS
1
2
MR2
3
4
5
4"
4"
4" 4"
4" 4" 4"
4" 4" 4" 4"
Loading...