Elkay LMABFTL8WS, LMABFTLDDWS User Manual

EZH2O® Bottle Filling Station

With Bi-Level Filtered Mechanically-Activated Water Cooler

SPECIFICATIONS

PRODUCT SPECIFICATION

Self-contained, wall hung refrigerated water cooler with bottle lling station.
LMABFTL8WS shall deliver 8 GPH of 50°F drinking water at 90°F ambient
and 80°F inlet water. LMABFTLDDWS shall deliver non-chilled drinking water.
Lower units shall have mechanically-activated pushbar operation. Bottle

lling unit shall include an electronic sensor for touchless activation with auto

20-second shut-off timer. Shall include Green Ticker™ displaying count of

plastic bottles saved from waste. Bottle ller shall provide 1.1-1.5 gpm
ow rate with laminar ow to minimize splashing. Shall include the

WaterSentry® Plus 3000-gallon capacity lter, certied to NSF/ANSI 42 and 53,
with visual monitor to indicate when replacement is necessary. Shall include
integrated silver ion anti-microbial protection in key areas. Unit shall

meet ADA guidelines. Unit shall be lead-free design which is certied to
NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements.
Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.

STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Fillter)

• Self-closing, mechanically-activated front and side pushbar controls (Cooler)

• Designed for installations where activation of cooler is needed even during

power disruptions

• WaterSentry® Plus 3000-gallon capacity Filtration System, certied to
NSF/ANSI 42 & 53 (Lead, Class 1 Particulate, Chlorine, Taste & Odor)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm (LMABFTL8WS); 1.5 gpm (LMABFTLDDWS)

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• LED Visual Filter Monitor shows when replacement is necessary

• Available with Flexi-Guard® Safety Bubbler

• Cooler panel nishes: Light Gray Granite Vinyl Clad Steel or Stainless Steel

COOLING SYSTEM (Model LMABFTL8WS only)

• Compressor: hermetically-sealed, reciprocating type, single phase.

Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is

permanently lubricated.

• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous

copper tubing with stainless steel tank. Fully insulated with EPS foam which

meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately calibrated

capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat is
factory preset. Requires no adjustment other than for altitude requirements.

CAPACITIES CHART

Model Voltage / Hertz

LMABFTL8WS* 115V / 60Hz 8 GPH 4.0 370 75

LMABFTLDDWS* - - 1.0 15 40

Chilling**

Capacity

F.L.

Amps

Rated
Watts

Models LMABFTL8WS and LMABFTLDDWS

Approx.

Ship

Weight.

RATED FOR INDOOR USE ONLY

Model LMABFTL8WSLK or
LMABFTLDDWSLKDWSLK

CONSTRUCTION

• Stainless Steel basin with integral drain and embossed

bubbler pad

• Galvanized structural steel cooler chassis provides

structural integrity

• Cooler cabinet available as Light Gray Granite

Vinyl Clad Steel or Stainless Steel (additional cost)
construction

• Flexi-Guard® Safety Bubbler utilizes an infused

anti-microbial pliable polyester elastomer to prevent

accidental mouth injuries. Flexes on impact.

Replacement Filters: Available as Singles and Multi-packs.
Order part numbers:

• 51300C (single)

• 51300C_3PK (three)

• 51300C_12PK (twelve)

• 51300C_24PK (twenty-four)

• 51300C_48PK (forty-eight)

CERTIFICATIONS / STANDARDS

• ADA Compliant

• UL399 and CAN/CSA 22.2 No. 120 Certied

• ANSI/NSF 61 and 372 Certied

• ANSI/NSF 42 and 53 Certied (Filter only)

• GreenSpec® Listed

*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels.
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.

Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12 months
from date of installation or 18 months from factory shipment, whichever date

falls rst.

In keeping with our policy of continuing product
improvement, Elkay reserves the right to change

specication without notice. Please visit elkaypro.com
for the most current version.

2222 Camden Court
OakBrook, IL 60523

630-572-3192

elkay.com

This specication describes an Elkay product with design, quality
and functional benets to the user. When making a comparison

of other producer’s offerings, be certain these features are not
overlooked.

© 2014 Elkay

SPEC00087 (09/2014)

EZH2O® Bottle Filling Station

With Bi-Level Filtered Mechanically-Activated Water Cooler

Models LMABFTL8WS and LMABFTLDDWS

IMPORTANT!

This water cooler has been designed and built to provide water to the user which
has not been altered by materials in the cooler waterways. The grounding of

electrical equipment such as telephone, computers, etc., to water lines is a

common procedure. This grounding may be in the building but may also occur
away from the building. This grounding can cause electrical feedback into a
water cooler creating an electrolysis which creates a metallic taste or causes
an increase in the metal content of the water. This condition is avoidable by
installing the cooler using the proper materials as shown below.

7/16"

O

11mm

MOUNTING HOLES

(6)

ACTIVATION
SENSOR

INSTALLER PLEASE NOTE

7"

178mm

15"

381mm

5 3/4"

146mm

17 7/8"

454mm

7"

178mm

5 3/4"

146mm

18 1/16"

459mm

ROUGH-IN DIMENSIONS

This water cooler must be connected to the water supply using a dielectric
coupling. The cooler is furnished with a non-metallic strainer which meets this

requirement. The drain trap which is provided by the installer should also be

plastic to completely isolate the cooler from the building plumbing system.

NOTICE

3 9/16"
90mm

18 5/8"

472mm

HANGER BRACKET

18 7/8"

479mm

58 9/16"
1488mm

45 9/16"

1157mm

37 1/2"

952mm

3 3/16"

82mm

6 1/2"

165mm

7 1/4"

185mm

20 3/8"
518mm

1 3/8"

35mm

E

F

2 9/16"
65mm

4 9/16"
116mm

5"

127mm

1 3/8"

35mm

C

L

11/16"

18mm

2 7/16"
63mm

10"

254mm

FINISHED FLOOR

5 3/4"

146mm

1 3/8"

1 3/8"

35mm

35mm

C

L

B

6 1/4"

159mm

3 1/2"

89mm

4 1/2"

114mm

5 3/4"

146mm

13 7/8"

352mm

REDUCE HEIGHT BY 3" FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND:

A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept

3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.

B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/2” Trap (not furnished).

D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.

E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet
louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.

**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

5/16" (8mm) DIA.
(10 HOLES)

D

E

8"

27"

686mm

ADA

203mm

4 1/8"

105mm

C

12 5/16"
313mm

6 3/4"

172mm

A

F

18 3/4"

476mm

20 1/8"
511mm

25 1/8"

638mm

39 1/2"

1003mm

33"
838mm
ORIFICE

HEIGHT

31 15/16"

811mm

RIM HEIGHT

REQUIREMENT

Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes:

2222 Camden Court
Oak Brook, IL 60523

elkay.com

Printed in U.S.A.

© 2014 Elkay