Elkay LKUMSK25 User Manual

Part Number Recommended Kits Quantity

Silicone

GENERAL

Undermount Support Kits simplify the undermount sink installation process. Recommended for use with sinks listed below. Can be used to aid in the installation of other undermount sinks. Hang the Undermount Support Kits on the cabinet walls in the front to back direction only, using the LKUMSK25 kit. The LKUMSK36 kit should only be used left to right, hung between rails that are mounted front to back.

LKUMSK25

Rails provided are 25 inches long; can be cut to length as required.

LKUMSK36

Rails provided are 36 inches long; can be cut to length as required.

Sink Accessories

Undermount Support Kits

LKUMSK25 AND LKUMSK36

Cabinet Frame

Rear of Cabinet

Rails

Front of

Cabinet

ELG1515 LKUMSK25 1 ELGU2218 LKUMSK25 2 ELGU250R LKUMSK25 and LKUMSK36 1 each ELGU2522 LKUMSK25 1 ELGU3322 LKUMSK25 and LKUMSK36 1 each ELGULB3322 LKUMSK25 and LKUMSK36 1 each ELGUS3322R LKUMSK25 and LKUMSK36 1 each ELQTU2218 LKUMSK25 2 ELQTU342210 LKUMSK25 and LKUMSK36 1 each ELQTULB342210 LKUMSK25 and LKUMSK36 1 each SWU1515 LKUMSK25 1 SWU211910 LKUMSK25 1 SWU322010 LKUMSK25 and LKUMSK36 1 each

Rear of Cabinet

Front of Cabinet

Notch cabinet frame if needed

4 Joiner Clips in Channels

4 Bolts

Countertop

1st Set of Rails

Caulk

Side View

2nd Set of Rails

Sink

In keeping with ourpolicy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkayusa.com for most current version of Elkay product specification sheets.

Elkay

elkayusa.com

2222 Camden Court Oak Brook, IL 60523

Rail

Cabinet Frame

Mounting B racket

This specification describes an Elkay product with design, quality and functional benefits to the user. When makingacomparison of other producers’ offerings, be certain these features are not overlooked.

(Rev. /09) 15-