Elkay LKQD35SD, LKQS35JB Installation manual

Installation Instructions LKQD35 Series LKQS35 Series
LKQD35 - DISPOSAL FLANGE FITTING WITH REMOVABLE STRAINER FOR GARBAGE DISPOSALS
SINK
METAL COLLAR
DISPOSER
FLANGE
GASKET
SINK
METAL COLLAR
STRAINER GASKET
FLANGE
MAKE SURE DISPOSER IS INSTALLED PROPERLY TO SINK AND CLAMP IS SECURED
CLEAN INSIDE OF METAL COLLAR (SUPPLIED WITH GARBAGE DISPOSER)
LUBRICATE FLANGE GASKET WITH WATER AND PUSH FLANGE SLOWLY INTO THE METAL COLLAR. PRESS FIRMLY UNTIL IN PLACE.
LUBRICATE GASKET ON STRAINER WITH WATER AND PUSH SLOWLY INTO THE FLANGE
LKQS35 - DRAIN WITH REMOVABLE STRAINER
RIM
STRAINER FLANGE
SINK
FLANGE GASKET
DRAIN BODY
FERRULE
SINK
APPLY A SMALL AMOUNT OF NEUTRAL CURE* SILICONE CAULK / ADHESIVE UNDER THE RIM OF STRAINER FLANGE
PLACE INTO SINK
LUBRICATE FLANGE GASKET WITH WATER, PLACE INTO LIP OF DRAIN BODY AND POSITION DRAIN BODY ON THE SINK BOTTOM
LINE UP RIBS IN DRAIN BODY AND STRAINER FLANGE THEN SCREW IN FERRULE. CAUTION: HAND TIGHTEN THEN 1/4 TURN WITH SMALL SCREW DRIVER. DO NOT OVER TIGHTEN. REMOVE EXCESS CAULK / ADHESIVE
SINK
DESIGNED FOR GARBAGE DISPOSALS THAT ACCOMMODATE 3-1/2” (89mm) DIAMETER FLANGE, OR ANY DISPOSER WITH AN INSINKERATOR QUICK LOCK MOUNTING COLLAR EXCEPT THE INSINKERATOR EVOLUTION LINE. NOT INTENDED FOR THE FOLLOWING BRANDS: GE, SINKMASTER, WHIRLAWAY MODELS WITH THE EZ MOUNT FLANGE. NOT INTENDED TO FIT BATCH FEED GARBAGE DISPOSALS.
LIMITED 1 YEAR WARRANTY
• DRAINS ARE WARRANTED TO BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP FOR A PERIOD OF 1 YEAR FROM DATE OF PURCHASE.
• OUR WARRANTY DOES NOT COVER PRODUCT FAILURE OR DAMAGE CAUSED BY ABUSIVE TREATMENT, MISUSE, ENVIRONMENTAL FACTORS OR IMPROPER CARE AND CLEANING.
• NO ADDITIONAL WARRANTIES, EXPRESS OR IMPLIED ARE GIVEN.
• THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MIGHT HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
• PROOF OF PURCHASE INCLUDING DATE OF PURCHASE IS REQUIRED
ELKAY
2222 Camden Court Oak Brook, IL 60523
© 2016 Elkay Printed in Scotland elkayusa.com
STRAINER
SINK
WASHER
DRAIN BODY
NUT DRAIN TUBING (NOT SUPPLIED)
*SOME EXAMPLES OF NEUTRAL CURE SEALANT ARE AS FOLLOWS:
-GE SILICONE II PRODUCTS
-WHITE LIGHTNING SILICONE ULTRA KITCHEN AND BATH
-DAP SILICONE PRODUCTS
PUSH STRAINER INTO FERRULE IN DRAIN BODY
MAKER SURE WASHER IS IN POSITION, SLIDE NUT ON 1 1/2” DRAIN TUBING AND HAND TIGHTEN THE DRAIN BODY NUT. TEST FOR LEAKS.
For Customer Care Support, Call: 800-476-4106
(Rev C 6/17) 1000003753
Loading...