Elkay LK730 User Manual

Multi-Unit Adapter & Wire Lead

3-9/16" (90mm)

(102mm)

3-9/16" (90mm)

4-11/16" (119mm)

LK727

INPUT:

110-220VAC

OUTPUT:

12VDC, 3A

ATTACH THIS END TO THE APPROPRIATE CONNECTION INSIDE CONTROL BOX

24" (610mm) WIRE LEAD

LK730

INPUT: 110-120 VAC

TYPICAL INSTALLATION (LK721AC)

LK727 MULTI-UNIT

POWER ADAPTER OUTLET LOCATION BY OTHERS (POWER SUPPLY MUST BE INSTALLED PER LOCAL CODES) – INSTALLER MAY CONNECT UP TO 8 FAUCETS TO THE 1 ADAPTER

WIRE CONNECTORS & ADDITIONAL 20-22GA WIRE (NOT SUPPLIED)

LK730 WIRE LEAD FROM FAUCETS TO LK727 MULTI-UNIT ADAPTER

Models LK727 and LK730

SPECIFICATIONS

GENERAL

LK727 Multi-unit 12 Volt output power adapter. Adapter is designed to be used with the LK721AC and the LK722AC sensor faucets only. The adapter and the LK730 wire lead (purchased separately) can be used in the field to connect up to 8 faucets to one power source. Depending on the location of the faucets and the location of the adapter, additional 20-22 gauge wire (not supplied) may be needed. Unit must be installed per local codes. Ship. Wt. 4 lbs.

LK730 24" (610mm) wire lead allows contractor to connect each faucet control box to one LK727 multi-unit power adapter. Depending on the location of the LK727, 20-22 gauge wire (not supplied) may be required from LK730 to LK727. Installer needs to remove the cover of the faucet control box and attach to the appropriate connection inside the box. Ship. Wt. 1 lb.

Model LK727

Elkay Manufacturing Company

www.elkay.com

2222 Camden Court Oak Brook, IL 60523

Model LK730

(5/01) 17-26