S P E C I F I C AT I O N S
GENERAL
Pedestal steel bottle filler with textured power coat finish and
E-Coat immersion for year-round beauty with minimum maintenance. The E-Coat immersion process coats the outside
and inside of the unit for the ultimate in corrosion protection.
Configuration options:
- Single bottle filler in upper location with drinking fountain basins
at middle & lower positions (Model LK4430BF1U)
- Single bottle filler in middle location with drinking fountain basins
at upper & lower positions (Model LK4430BF1M)
- Single bottle filler in lower location with drinking fountain basins
at upper & middle positions (Model LK4430BF1L)
- Bottle fillers in upper & lower locations with drinking fountain basin
at middle position (Model LK4430BF2UL)
- Bottle fillers in upper & middle locations with drinking fountain basin
at lower position (Model LK4430BF2UM)
- Bottle fillers in middle & lower locations with drinking fountain basin
at upper position (Model LK4430BF2ML)
- Triple bottle fillers (Model LK4430BF3)
NO LEAD DESIGN
This fountain is certified by WQA to lead-free compliance
including NSF/ANSI 61-ANNEX G, AB 1953.
This model complies with the lead-free definition in the Safe
Drinking Water Act of 1986 and Lead Contamination Act of 1988.
Tri-Level Outdoor Tubular
Bottle Filling Station
Model LK4430BF
CONSTRUCTION
Bottle Filler: Heavy-duty steel construction with rounded design.
Laminar flow minimizes splash and allows easy maintenance.
Quick fill rate at 1 gallon per minute.
Pushbutton Actuation Mechanism: Self-closing, vandalresistant pushbutton does not require grasping or twisting.
Inlet Strainer: Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway.
Access Panel: Manufactured of heavy-gauge steel with
vandal-resistant screws. Provides access for easy hook-up of
all plumbing connections.
This model is ADA compliant when properly installed.
Designed to be easily accessible to both physically challenged
and able-bodied individuals. Ideally suited for installation in
public areas. Model meets state and federal requirements as
defined by the Americans with Disabilities Act.
Model LK4430BF2UM Shown
AVAILABLE OPTIONS
Freeze-resistant option - add “FRK” suffix to model number.
(See separate specification sheet.)
SUGGESTED SPECIFICATIONS
Unit shall be of tubular steel construction. Bottle Filler unit
shall include laminar flow and front pushbutton activation.
Stainless steel contoured basin with vandal-resistant one-piece
bubbler, if applicable. Shall comply with ADA guidelines and
be certified to lead-free compliance including NSF/ANSI 61,
CA 1953 and the Safe Drinking Water Act.
Shipping Weight: 280, 330, or 380 lbs.
In keeping with our polic y of continuing p roduct improvement, Elkay reserves the right to change
produc t specif ications without notice.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product wit h design, quality and funct ional benefits t o t he
user. When making a com parison of other p roducers’ offerings, be c ertain these features are not
overlooked.
Printed in U.S.A.
©2011 Elkay
(9/11) 19-30
Outdoor Tri-Level Tubular
Bottle Filling Station/Fountain
Model LK4430BF1
(Single Bottle Filler & 2 Fountain Basins)
MOUNTING INSTRUCTIONS and
PLUMBING CONNECTIONS
Mount on a smooth, flat, finished surface with adequate support (300 lb. load maximum. Secure unit with six 3/8” minimum
screws or anchor bolts (not provided). Refer to rough-in.
Water supply 3/8” O.D. unplated copper tube. Waste 1-1/2” IPS.
Trap and service stop not included.
Operating Pressures: Supply wate:: 20 - 105 psi maximum.r
ACTUAL PRODUCT CONFIGURATION WILL VARY BASED ON MODEL ORDERED.
1U = Upper Position; 1M = Middle Position; 1L = Lower Position
MODEL LK4430BF1U SHOWN BELOW
ROU GH - I N D I M ENSI O N S
12"
O
305mm
14"
O
356mm
TOP VIEW
B.C.
48"
1219mm
O
1/2"
13mm
®
HOLES (6 PL)
30"
762mm
8"
203mm
FRONT VIEW
B
B
3"
76mm
14 9/16"
371mm
44"
1118mm
34 7/16"
875mm
ORIFICE
HEIGHT
33 5/16"
846mm
27"
686mm
19"
483mm
1-1/2"
DRAIN
7 15/16"
201mm
SIDE VIEW
C
19"
483mm
A
C
FINISHED FLOOR
22 1/8"
562mm
28 7/16"
723mm
29 3/4"
756mm
ORIFICE
HEIGHT
BACK VIEW
64"
1626mm
O
10"
254mm
LEGEND
A = 3/8" O.D. UNPLATED COPPER TUBE CONNECT - SHUT OFF VALVE BY OTHERS
B = ACCESS PANEL ( 8" X 10" )
C = REMOVABLE BOTTOM COVER
2222 Camden Court
Oak Brook, IL 60523
19-30 (9/11)
elkayusa.com
Printed in U.S.A.
©2011 Elkay
Page 2