Elkay LK4420BF User Manual
S P E C I F I C AT I O N S
GENERAL
Pedestal steel bottle filler with textured power coat finish and
E-Coat immersion for year-round beauty with minimum maintenance. The E-Coat immersion process coats the outside
and inside of the unit for the ultimate in corrosion protection.
Configuration options:
- Single bottle filler in upper location with drinking fountain basin
at lower position (Model LK4420BF1U)
- Single bottle filler in lower location with drinking fountain basin
at upper position (Model LK4420BF1L)
- Dual bottle fillers (Model LK4420BF2)
NO LEAD DESIGN
This fountain is certified by WQA to lead-free compliance
including NSF/ANSI 61-ANNEX G, AB 1953.
This model complies with the lead-free definition in the Safe
Drinking Water Act of 1986 and Lead Contamination Act of 1988.
CONSTRUCTION
Bottle Filler: Heavy-duty steel construction with rounded design.
Laminar flow minimizes splash and allows easy maintenance.
Quick fill rate at 1 gallon per minute.
Pushbutton Actuation Mechanism: Self-closing, vandalresistant pushbutton does not require grasping or twisting.
Bi-Level Outdoor Tubular
Bottle Filling Station
Model LK4420BF
Inlet Strainer: Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterwa
y.
Access Panel: Manufactured of heavy-gauge steel with
vandal-resistant screws. Provides access for easy hook-up of
all plumbing connections.
This model is ADA compliant when properly installed.
Designed to be easily accessible to both physically challenged
and able-bodied individuals. Ideally suited for installation in
public areas. Model meets state and federal requirements as
defined by the Americans with Disabilities Act.
SUGGESTED SPECIFICATIONS
Unit shall be of tubular steel construction. Bottle Filler unit shall
include laminar flow and front pushbutton activation. Stainless
steel contoured basin with vandal-resistant one-piece bubbler, if
applicable. Shall comply with ADA guidelines and be certified to
lead-free compliance including NSF/ANSI 61, CA 1953 and the
Safe Drinking Water Act.
Model LK4420BF2 Shown
AVAILABLE OPTIONS
Freeze-resistant option - add “FRK” suffix to model number.
(See separate specification sheet.)
Shipping Weight: 190-240 lbs.
In keeping with our polic y of continuing p roduct improvement, Elkay reserves the right to change
produc t specif ications without notice.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product wit h design, quality and funct ional benefits t o t he
user. When making a com parison of other p roducers’ offerings, be c ertain these features are not
overlooked.
Printed in U.S.A.
©2011 Elkay
(9/11) 19-28
Outdoor Bi-Level Tubular
Bottle Filling Station/Fountain
Model LK4420BF1U
MOUNTING INSTRUCTIONS and
PLUMBING CONNECTIONS
Mount on a smooth, flat, finished surface with adequate support (300 lb. load maximum. Secure unit with six 3/8” minimum
screws or anchor bolts (not provided). Refer to rough-in.
Water supply 3/8” O.D. unplated copper tube. Waste 1-1/2” IPS.
Trap and service stop not included.
Operating Pressures: Supply wate:: 20 - 105 psi maximum.r
®
ROU GH - I N D I M ENSI O N S
TOP VIEW
.
O (6)
1/2"
(13mm)
12"
O
305mm
B.C.
O
14"
356mm
30"
762mm
FRONT VIEW
B
64"
1626mm
1-1/2" DRAIN
(38mm)
23 1/8"
587mm
SIDE VIEW
10"
O
254mm
BACK VIEW
3"
76mm
14 9/16"
371mm
2 7/8"
73mm
44"
1118mm
C
19"
483mm
A
27"
686mm
33 5/16"
847mm
35 3/16"
894mm
8"
203mm
FINISHED FLOOR
LEGEND
A = 3/8" O.D. UNPLATED COPPER TUBE CONNECT - SHUT OFF VALVE BY OTHERS
B = ACCESS PANEL ( 8" X 10" )
C = REMOVABLE BOTTOM COVER
2222 Camden Court
Oak Brook, IL 60523
19-28 (9/11)
elkayusa.com
Printed in U.S.A.
©2011 Elkay
Page 2
Loading...