Elkay LK348 User Manual
®
S P E C I F I C ATI O N S
Countertop
(up to 2"
[51mm]
thick)
Clamp
Screw
LK348
Countertop
(up to 1-1/2"
[38mm] thick)
Screw
(LK364)
Clip
LK363
Hex
Head
Screw
LK463
Clip
Hex Nut
Hex
Nut
Countertop
(up to 2-1/2"
[64mm] thick)
Countertop
Sink
Washer
(Not Furnished)
Fastener
(Not Furnished)
13-11/16"
(348mm)
10-1/4"
(260mm)
LK350/LK352
Sink Accessories
Fasteners and Screwdrivers
Models LK348, LK363, LK364, LK463,
LKUCLIP8, LK350 and LK352
GENERAL
Our standard clips/screws/lugs that are supplied with most of
our top mount self-rimming sinks are designed for standard
countertop thicknesses up to 3/4" (19mm) thick. For countertop thicknesses over 3/4" (19mm) – choose from the selection
below based on the installation method and countertop
thickness.
LK348: Set of 12 screws and clamps for “J” channel installation sinks. Designed to accommodate thicker countertops up
to 2" (51mm) thick.
LK363: Set of 14 s
crews and clips for “U” channel installation
sinks. Designed to accommodate thicker countertops up to
1-1/2" (38mm) thick.
LK364: Set of 14 screws only for “U” channel installation
sinks. Retain and use the clips that are provided with the
sinks. Designed to accommodate thicker countertops up to
1-1/2" (38mm) thick.
LK463: 3 sets of 14 hex head screws, 28 hex nuts and 1 set
of clips for “U” channel installation sinks. Choose the appropriate screw length for different count
ertop thicknesses.
Designed to accommodate thicker countertops up to 2-1/2"
(64mm) thick.
NOTE: When installing “U” channel sinks in countertops over
2-1/2" (64mm), use #8-32 round machine screws with (2) hex
nuts. Length of screw should be 1/2" (13mm) longer than
thickness of the countertop. 2 hex nuts are needed per
machine screw (1 for installation under the U-channel and 1
for under the clip).
LKUCLIP8: Set of 8 undermount clips. Designed to attach
undermount sinks to
a solid surface countertop. Single bowl
sinks require a minimum of 1 package. Double bowl sinks
require a minimum of 2 packages. Triple bowl sinks require a
minimum of 3 packages.
LK350: Extra long screwdriver with special ends that allow
the installer to easily reach and turn the installation screws for
“U” channel installation sinks. Handle with an overall length of
13-11/16" (348mm).
LK352: Set of 3 LK350 screwdrivers packaged.
“J” Channel Type Installation Profile
“U” Channel Type Installation Profile
LKUCLIP8
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Printed in U.S.A.
©2008 Elkay
(Rev. 10/08) 15-28A
Loading...